• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.181-189
• /
• 2020

As production, distribution, consumption and processing increase with the development of industrial societies, the importance of resource depletion and environmental problems is increasing day by day. This has led to increased research and interest in remanufacturing that can satisfy both environmental and economic aspects. Currently, the remanufacturing industry is progressed in Korea with automobile parts with as the central figure, and it needs to be expanded into various areas. In this study, the failure type analysis and FMEA were performed on the hydraulic pumps used in construction and industrial sites for the development of the standard remanufacturing process plan, and the actual disassembly and reassembly process was carried out. Remanufacturing products were manufactured through the analysis contents and drawing process, performance tests were conducted in accordance with RS B1501 criteria to evaluate performance, and all of these products passed the test criteria.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.594-601
• /
• 2006

통계청에서 실시하는 통계 조사에는 한국 표준 산업/직업 분류 코드를 작성하는 작업이 많이 포함되는데, 현재 대부분의 코드 분류 작업은 수작업으로 이루어지고 있으며, 이로 인하여 막대한 노동력과 비용이 소모되고 작업결과의 일관성을 유지하기 어렵다는 문제점이 있다. 본 논문은 수동 코드 분류 규칙과 예제기반의 자동 학습을 이용하는 한국어 표준 산업/직업 코드 자동 분류 시스템을 제안한다. 제안된 시스템은 산업과 직업에 대하여 설명하는 자 연어를 입력받아 해당 산업/직업 분류 코드를 생성하는 시스템으로 수작업으로 구축된 규칙을 적용한 후 규칙이 적용되지 않는 레코드는 예제 기반의 학습을 이용한 자동 분류 시스템에 의해서 해당 코드를 할당한다. 수작업 규칙 260여개와 40만여개의 예제를 이용하여 학습한 시스템에 대하여 실험한 결과 제안한 시스템은 직업 코드 분류에서 76.69% 그리고 산업 코드 분류에서는 99.68%의 정확도를 보였다.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.52-65
• /
• 1999

This study was performed to evaluate the hand-arm vibration of the steel processing factory workers. Measurement, evaluation and as sessment were based on the International Standard(ISO 5349). The frequency weighted accelerations of the various hand-held tools and total exposure time were measured to assess the periods for the white finger symptom to occur. As a result, it was found that the air angle grinder and the air baby grinder are more harmful than other hand-held tools. It was also found that using various vibratory tools together is more harmful than using a single tool.

• 한국측량학회지
• /
• 제29권4호
• /
• pp.421-428
• /
• 2011

공간정보산업의 범위가 모호하여 산업규모와 국민경제에서 차지하는 가치를 조사하기가 힘들었다. 본 연구에서는 한국표준산업분류에 기초하여 공간정보산업 범위와 종류를 명확히 할 수 있는 분류안을 제안하였다. 분류안은 공간정보의 가치사슬에 대응하는 각산업 영역의 역한과 특정을 고려하고 기존 표준산업분류체계를 기초로 하였기 때문에 타 산업분야와 연계성이 높은 공간정보산업의 특정을 반영하고 있다. 향후 본 연구에서 제안한 분류안을 활용하여 공간정보산업 정책을 수립하기 위한 산업 통계정보를 체계적으로 구축할 수 있을 것이다.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.427-445
• /
• 2017

Purpose: This paper provides a method to identify cost-effective standards by analyzing the relationships between certified company and standards. It also aims to provide a evaluation model to establish a certification portfolio strategy of institutions. Methods: By analysing the networks of certified company and certification standards, this paper developed an evaluation model of standards. The evaluation model uses an index(Certificated Standard Evaluation Index; CSEI) to assess the value of standards. Results: To verify the applicability of the evaluation model, the proposed model and the CSEL index have been applied to certification standards of Korean Standard Association. The results show that the evaluation model can effectively identify potential customers and thereby establish a certification portfolio strategy. Conclusion: The main contribution of this study is a provision of a new approach to certification portfolio strategy by evaluating the value of standards. The proposed model is expected to provide implications for the certification portfolio strategy.

• 한국한의학연구원논문집
• /
• 제16권3호
• /
• pp.115-121
• /
• 2010

Objectives : Quality control of the needle tips and prevention of pollutions are important factor for safe and effective acupuncture treatment. Ear acupuncture needle is made by 3 companies in Korea, and used to treat for obesity or smoking in clinic frequently, but the Korean industrial Standard is proposed most recently. In spite of the importance, there has been little study about that. Moreover, there was no study about ear acupuncture needle. Methods : We investigated the current condition of needle shape and pollution about the tips and body of the ear acupuncture needle under the stereoscopic microscope. Samples are selected 100 pieces from 300 pieces randomly in each company. Results : The substandard needles are classified into four groups and counted 1. Normal condition (55.3%), 2. Scratch on the surface (14.0%), 3. Malformation of tips (19.3%), 4. Pollution of body (4.3%), 5. Multiple Substandard (7.0%). In the case of including type 2 as a standard needle, normal rate of A company was 81% when B was 76%, and C was 51%. Conclusion : The substandard ear acupuncture needles can induce local side effects such as needling pain or itching. Furthermore, it can disturb the proper effect of acupuncture treatment. We hope that this study can help to improvequality of ear acupuncture and reduce substandard rate for safe and effective ear acupuncture treatment.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.309-323
• /
• 2006

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.135-137
• /
• 2009

After setting the gold standard for both industrial dropon-demand inkjet printheads and R&D printers for functional materials printing, FUJIFILM Dimatix has developed a printhead with the highest jetting frequency ever obtained. Operating at 100 kHz, the MEMS fabricated SAMBA printhead expands the capabilities of fabrication methods for display applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.584-589
• /
• 2002

Recently, in various industrial field standardization and performance improvement are actively on going. Noise barrier is generally used to reduce railway noise. But the effectiveness of its use is low because of low level of technology development. In this basic study, test item and its specification are suggested for standardization of railway noise barrier.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.172-183
• /
• 1995

The airborne concentrations of the welding fumes produced during $CO_2$ arcwelding process at shipbuilding, shiprepairing, container manufacturing and car accessary manufacturing industry were investigated. The effects how much reduced the welding fume were checked when the portable fan was used. The results were as follows; 1.The geometric mean of welding fume concentration in shipbuilding factory was $10.05mg/m^3$. This exposure concentration was higher than other 3 manufacturing industries at 95% confidence level. 2. The sampling filters for welding fume could be digested with acid within 1 hour by microwave oven. The recoveries for investigated metal elements were all over 95%. 3. The optimal wavelength could be selected for the simultaneous analysis of 8 metal elements by ICP(Inductively Coupled Plasma). 4. Noxious gases($O_1,NO_2$) produced during $CO_1$ gas arc welding process were detected that the concentration of ozone($O_1$) was less than 0.01 ppm and that of nitrogen dioxide($NO_2$) was 0.01-0.03 ppm. 5. The geometric mean of welding fume particle diameter was $1.26{\mu}m$ and geometric standard deviation was 1.51 for the counts when particle an analyzer(ELZONE) had been used. 6. When the portable fan had been used,the reduced percent of total welding fume for workers was about 47.8% when portable fan was applied to blow and 71.7% when to exhaust.