• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.81-91
• /
• 2014

The IEC 61508 standard was established to specify the functional safety of E/E/PE safety-related systems. Safety life cycle to provide the framework and direction for the application of IEC 61508 is included in this standard. In this paper, we describe overviews, objects, scopes, requirements and activities of each phase in safety life cycle. In addition, we introduce safety integrity level(SIL) which is used for verifying the safety integrity requirements of E/E/PE system and perform a case study to estimate hardware SIL by FMEDA. The SIL is evaluated by two criteria. One of them is the architectural constraints which restrict the maximum SIL by combination of SFF and HFT. The other is the probability of failure which is classified into PFD and PFH based on frequency of demand and calculated by safe or dangerous failure rates.

• 산업공학
• /
• 제25권4호
• /
• pp.405-415
• /
• 2012

The reliability performance measures for low and high or continuous demand modes of operation of safety instrumented systems(SISs) are examined and compared by analyzing the official definitions in IEC 61508 standard. This paper also presents a status of common cause factor(CCF) models used in IEC 61508 and problems relating CCF modelling are discussed and ideas to solve these ones are suggested. An example with mixed M-out-of-N architecture is carried out to illustrate the proposed methods.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.114-121
• /
• 2014

An environmental test has been performed in order to improve the lifetime and reliability of the electrical units on aircraft. However, faults occurring in the field of aircraft have been difficult to predict and prevent, and new concepts for reliability testing are desired. Therefore, a composite reliability test sequence was proposed in the conventional studies. This study introduces test sequence guidelines based on relevant principles and considerations for electronic testing according to International Standard IEC-60068-1 and the United States Military Standard MIL-STD-810G. In addition, we analyze possible causes of failure using two-step QFD based on aircraft operation scenarios. Finally, the proposed test sequence can reproduce various and realistic failure modes for electrical units on aircraft.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.5-9
• /
• 2011

Butterfly valves are widely used in current industry to control the fluid flow. They are used for both on-off and throttling applications involving large flows at relatively low pressure-drop especially in large size pipelines. In this study, we carried out the structure analysis of the butterfly valve components according to pressure testing of the industrial standard. the numerical simulation was performed by using ANSYS Workbench. The reliability of valve is evaluated under the investigation of the strain rate, the leak test and the durability of the valve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1120-1125
• /
• 2002

Recently Korean Industrial Standards has been revised and established newly accordance with the ISO system, especially ISO 140 series. This study aims to introduce and review ISO l1654 which contents rating of sound absorption. It is available to establish appropriate evaluating method and Korean Industrial Standard of the sound absorber for use in building.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.135-149
• /
• 1994

Demand forecasting is to estimate the demand of customers for products and services. Since the future is uncertain in nature, it is too difficult for us to predict exactly what will happen. Therefore, when the forecasting is performed upon the uncertain future, it is realistic to estimate the value of demand as an interval or a fuzzy number instead of a crisp number. In this paper, we propose a demand forecasting method using the standard back-propagation algorithm and then we extend the method to the case of interval inputs. Next, we demonstrate that the proposed method using the interval neural networks can represent the fuzziness of forecasting values as intervals. Last, we propose a demand forecasting method using the transformed input variables that can be obtained by taking account of the degree of influence between an input and an output.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.17-24
• /
• 2020

This study analyzes economic feasibility by looking at the case of wastewater reclamation and reuse system of Osan, the only place currently operated in Korea, exploiting wastewater uniquely reused as industrial water. Furthermore, this paper examines the problem in wastewater recycling and present the method to expand the potential of using reclaimed water. Method to activate the reuse of wastewater as industrial water. First, it is required to provide self-governing body and demander with diverse information on this project so that they correctly recognize the reuse of wastewater as industrial water. Second, law should be amended so that the water quality requirement of reused water can be given in the national level to supply industrial water depending on right standard. Third, financial support should be expanded in diverse parts so that more private investment advantageous to investor can be made, for instance, BTL, BTO.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.571-578
• /
• 1998

In this paper, we deal with a node weighted Steiner Ring Problem (SRP) arising from the deployment of Synchronous Optical Networks (SONET), a standard of transmission using optical fiber technology. The problem is to find a minimum weight cycle (ring) covering a subset of nodes in the network considering node and link weights. We have developed two mathematical models, one of which is stronger than the other in terms of LP bounds, whereas the number of constraints of the weaker one is polynomially bounded. In order to solve the problem optimally, we have developed some preprocessing rules and valid inequalities. We have also prescribed an effective heuristic procedure for providing tight upper bounds. Computational results show that the stronger model is better in terms of computation time, and valid inequalities and preprocessing rules are effective for solving the problem optimally.

• 설비공학논문집
• /
• 제22권4호
• /
• pp.241-247
• /
• 2010

This study aims to investigate and improve the present state of technical standard on building mechanical system in Korea. At this point be tormented the energy depletions are big problem on the rise. Building mechanical system is configured air conditioning, sanitation, urban equipment. In the design of equipment, installation, maintenance, applies to all devices in the field of industrial equipment and general engineering equipment field are within bounds to say that all of the equipment field. However, domestic technology level is still fly short of international standards in architecture, we spent much energy. Because of this, find the current situation and identify the problems look up ways to improve them.

• 산업공학
• /
• 제7권1호
• /
• pp.67-74
• /
• 1994

In this study, we propose an integrated CAD(Computer Aided Design) library database in a heterogeneous commercial ECAD(Electronic CAD) environment. To effectively solve engineering problems focused on BOM data extraction we use a software system called schematic capture and company-wide standard electronic part information loaded on different commercial ECADs. We unify many commercial ECADs into one schematic capture and a variety of PCB(Printed Circuit Board) design tools. For this purpose we develope a model for linking CAD symbol library with company-wide standard part information. We also develope a schematic design data conversion scheme and show how to extract PBA level BOM data using our customized schematic capture. This system is being operated in an X-Window based engineering work station and commercial RDBMS base.