• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.1-8
• /
• 1991

The geoid is the one of major suject in Geophysics and Geodesy. The iregularities of the geoid will affect the computation of precise geodetic coordinates and moreover will cause an errors in trajectory computations and reference directions for inertial guidance system. The aim of this study is to develope the best local geoid model for Korea. For this purpose, an astrogeodetic levelling and surface fitting techniques have been applied in determination of the geoid as a first trials. As a result of it, a local geoid has been obtained with the standard errors of $\pm$0.49m and $\pm$0.66m respectively and the maximum geoid undulation in Korea is found as 22m~23m approximately.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.173-180
• /
• 2003

As the utility value of GPS in surveying field is on the increase after the conversion into the world geodetic system, most of the baseline processing programs seeking the relative baseline vector for the roving point based on the base point are dependent on the foreign software, and such dependence remains a stumbling block to its wide application. In this study an algorithm was established settling ambiguity through LAMBDA techniques and the baseline processing program was developed for Ll carrier phase using visual c＋＋ 6.0, which is an object-oriented language. And the developed program proved that it maintained a difference of less than 4.9 cm over the short baseline of 4.9 km or shorter when compared with other commercialized programs.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.561-571
• /
• 2017

Radio navigation systems are already used as important national infrastructures in various fields such as air traffic, land transportation, geodetic survey, broadcasting communication and national defense, and are used in various industries. Since these systems are fusion of various technologies, it takes much time and cost in the development stage. In the early stages of development of the system, developed countries are establishing a national mid-term plan that meets international compatibility and standards. Korea did not develop the system due to the lack of national mid- and long-term plan, and it is not contributing effectively to industries. This paper analyzes the technical principles and technology trend of radio navigation system in the aviation sector to establish mid - and long - term plan. Based on the analyzed technology trends, the future prospect of technological development of the domestic navigation system and the development of related industries will be presented.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2017

In this paper, in order to verify the performance of a localization algorithm using GPS as an auxiliary sensor, the algorithm was applied to a hovering-type autonomous underwater vehicle (AUV) to perform a field test. The applied algorithm is an algorithm to improve the accumulated positional error of dead reckoning using doppler velocity logger(DVL) and tilt-compensated compass module (TCM) mounted on the AUV. GPS when surfaced helps the algorithm to estimate the position and the heading bias error of TCM for geodetic north, which makes it possible to perform dead reckoning on north-east-down (NED) coordinates. As a result of field test performing heading control, it was judged that the algorithm could improve the positional error, enhance the operational capability of AUV and contribute to the research of underwater navigation depending on a magnetic compass.

• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.61-75
• /
• 2000

Through modeling fault network using thin plate finite element technique in the San Andreas Fault system with slip rate over 1mm/year, as well as elevation, heat flow, earthquakes, geodetic data and crustal thickness, we compare the results with velocity boundary conditions of plate based on the NUVEL-1 plate model and the approximation of deformation in the Great Basin region. The frictional and dislocation creep constants of the crust are calculated to reproduce the observed variations in the maximum depth of seismicity which corresponds to the temperature ranging from $350^{\circ}C$ to $410^{\circ}C$. The rheologic constants are defined by the coefficient of friction on faults, and the apparent activation energy for creep in the lower crust. Two parameters above represent systematic variations in three experiments. The pattern of model indicates that the friction coefficient of major faults is 0.17~0.25. we test whether the weakness of faults is uniform or proportional to net slip. The geologic data show a good agreement when fault weakness is a trend of an additional 30% slip dependent weakening of the San Andreas. The results of study suggest that all weakening is slip dependent. The best models can be explained by the available data with RMS mismatch of as little as 3mm/year, so their predictions can be closely related with seismic hazard estimation, at least along faults where no data are available.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.460-464
• /
• 2002

Multitemporal interferometric SAR has became an useful geodetic tool for monitoring Earth's surface deformation, generation of precise DEM, and land cover classification even though there still exist certain constraints such as temporal and spatial decorrelation effects, atmospheric artifacts and inaccurate orbit information. The Korea where nearly all areas are heavily vegetated, JERS-1 SAR has advantages in monitoring surface deformations and environmental changes in that it uses 4-times longer wavelength than ERS-l/2 or RADARSAT SAR system. For generating differential SAR interferogram and differential coherence image fer deformation mapping and temporal change detection, respectively, topographic phase removal process is required utilizing a reference inteferogram or external DEM simulation. Because the SAR antenna baseline parameter for JERS-1 is less accurate than those of ERS-l/2, one can not estimate topographic phases from an external DEM and the residual phase appears in differential interferogram. In this paper, we examined topographic phase retrieval method utilizing an external DEM. The baseline refinement is carried out by minimizing the differences between the measured unwrapped phase and the reference points of the DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.303-310
• /
• 2009

We processed seven years data of 142 IGS(International GNSS Service) stations were processed, which have been selected with an optimal network algorithm, to realize terrestrial reference system. To verify the result, a comparison with the ITRF2005 was given both in positions and velocities with transformation parameters estimation. The transformation parameters are within 4.3 mm in length, while the RMS(root mean square) difference of positions and velocities are 6.7 mm and 1.3 mm/yr in horizontal and 13.3 mm and 2.4 mm/yr in vertical, respectively, which represent good coincidences with ITRF2005. This research would help developing our own geodetic reference frame and may be applied for the global earth observations such as the global tectonics. A further improved TRF would be expected by applying various data processing strategies and with extension of data in number and observation period.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.275-281
• /
• 2004

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. This study compare the whole boundary point error When producing EDM measurement using this GPS observation results and setting digital topographic map and nautical chart by these boundary.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.121-134
• /
• 2013

The transverse cylindrical projection has been used in Korea since 1910s when the nationwide geodetic network was firstly established. However, the projection has a number of different types of functions according to a way of its mathematical derivation as well as a section of its coefficients and terms, for instance Gauss- Schreiber(GS) and Gauss-Kruger(GK) types. Although the transverse cylindrical projection itself is assigned to a system, projected coordinates would be diverse with respect to the function used in the actual calculation. In order to investigate impact of functions used in the computation, five different equations (i.e., 2 GS and 3 GK) were implemented in this study by using MATLAB. A series of numerical simulation tests has been carried out to compare and characterize them in terms of projection accuracy, difference of projected coordinates and distortion. Furthermore, a comparison between GS and GK function was made under the Korean gridding system, consisting of four zones. Results from the numerical computations were qualitatively analyzed and summarized in this paper.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.1 no.1
• /
• pp.52-69
• /
• 1998

Using GIS, this study constructs and evaluates a bank marketing system. The study collects a marketing GIS database case from the Daegu Bank, which is one of the leading local banks in Korea. The database includes spatial data such as digital road map, internal and external attribute data which are combined for the construction of bank marketing database. Based on these data, the study developed an interface which enables searching and analysing functions of bank GIS marketing system. For the development of the interface, this study examined the basic concepts of area marketing and its development and utilized Map/Info as a basic GIS software package and Delphi as computer language. Finally, the study makes a comprehensive evaluation of various problems of spatial and attribute data which occurred in the process of constructing the bank marketing database.