• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.776-781
• /
• 2017

In this study, we investigated the effect of electrode pattern design on the thermal shock resistance and temperature uniformity of a ceramic heater. A cordierite substrate with a low thermal expansion coefficient was fabricated by tape casting, and a tungsten electrode was printed and used as a heating element. The temperature distribution of the ceramic heater was calculated by a finite-element method (FEM) by considering various electrode patterns, and the tensile stress distribution due to the thermal stress was calculated. In the electrode pattern with a single-line width, the central part of the ceramic heater was heated to the maximum temperature, and the position of the ceramic heater having a double-line width was changed to the maximum temperature, depending on the position of the minimum line width pattern. The highest tensile stress was found along the edges of the ceramic heater. The temperature gradient at the edge determined the tensile stress intensity. The smallest tensile stress was observed for electrode pattern D, which was expected to be advantageous in resisting thermal shock failures in ceramic heaters.

• 한국주조공학회지
• /
• 제23권2호
• /
• pp.86-93
• /
• 2003

It has been a major concern in the foundry that steel castings manufactured by the evaporative pattern casting process encounter the carbon pick-up problem. A carbon rich layer at the evaporative pattern cast surface is a result of interactions between the gaseous products from foamed polystyrene and the molten metal. The carburized layer with a high hardness makes it difficult to machine the casting. In this study, the influence of the density of EPS pattern and coatings on carbon pick-up phenomena of S25C and S45C commercial carbon cast steel were investigated. As the density of EPS pattern is increased, the carbon concentration of decomposed pattern is increased and the thickness of carburized layer at the surface of steel castings is increased. Also as the density of coatings is increased, the permeability of coatings is decreased and the thickness of carburized layer at the surface of steel castings is increased. S25C steel which has lower original carbon content compared to S45C steel exhibited severe carburization.

• 대한조선학회논문집
• /
• 제60권2호
• /
• pp.76-85
• /
• 2023

The present study aims to review the wave pattern resistance analysis method suggested by the International Towing Tank Conference. From the experimental database of a container carrier ship model, the wave pattern measurement and resistance test results are utilized. The wave pattern resistance at the design Froude number is obtained to be compared with the wave making resistance of experiments. Wave pattern resistance is lower than wave making resistance by 1978 ITTC and uniform regardless of transverse location of wave cut. The method is also applied to the wave height field by Computational Fluid Dynamics (CFD) analyses with Froude number variation. Although numerical damping suppressed waves in downstream, waves around the hull and wave pattern resistance are properly predicted.

• 소성∙가공
• /
• 제23권8호
• /
• pp.507-512
• /
• 2014

The objective of the current investigation is to establish techniques in micro pattern forming operations of polymeric circular tubes by using hydrostatic pressing. This method was developed and successfully applied to the micro pattern forming on polymeric plates. The key idea of the new technique is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature of the polymeric substrates. The new process is thought to be a promising micro-pattern fabrication technique for two reasons; first, (hydro-) isostatic pressing ensures a uniform micro-pattern replicating condition regardless of the substrate area and thickness. Second, multiple curved substrates can be patterned at the same time. With the prototype forming machine for the new process, micro prismatic array patterns, 25um in height and 90 degrees in apex angle, were successfully made on the PMMA circular tubes with diameters of 5~40mm. These results show that this process can be also used in the micro pattern forming process on curved plates such as circular tube.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.325-332
• /
• 2006

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The design procedure of membrane structures are needed to do shape finding, stress-deformation analysis and cutting pattern generation, because the material property has strong axial stiffness, but little bending stiffness. The problem of cutting pattern is highly varied in their size, curvature and material stiffness. So, the approximation inherent in cutting pattern generation methods is quite different. Therefore the ordinary computer software of structural analysis & design is not suitable for membrane structures. In this study, we develop the program for cutting pattern generation using geodesic line, and investigate the result of example's cutting pattern in detail.

• Genomics & Informatics
• /
• 제4권4호
• /
• pp.173-181
• /
• 2006

Pattern finding is one of the important tasks in a protein or DNA sequence analysis. Alignment is the widely used technique for finding patterns in sequence analysis. BLAST (Basic Local Alignment Search Tool) is one of the most popularly used tools in bio-informatics to explore available DNA or protein sequence databases. BLAST may generate a huge output for a large sequence data that contains various sequence patterns. However, BLAST does not provide a tool to summarize and analyze the patterns or matched alignments in the BLAST output file. BLAST lacks of general and robust parsing tools to extract the essential information out from its output. This paper presents a pattern summary system which is a powerful and comprehensive tool for discovering pattern structures in huge amount of sequence data in the BLAST. The pattern summary system can identify clusters of patterns, extract the cluster pattern sequences from the subject database of BLAST, and display the clusters graphically to show the distribution of clusters in the subject database.

• 대한가정학회지
• /
• 제50권1호
• /
• pp.29-39
• /
• 2012

The purpose of this research is to suggest a scarf design which reflects the traditional culture native to Korea by making use of the combined pattern of jokgakbo patchwork and ddeoksal(rice cake). For research methodology, the computer design programs of Adobe Illustrator CS3 and Adobe Photoshop CS3 were used along with the related literature. For the combined sets of motif pattern, the following were consider: first, a combination of jogakbo in square shape and chrysanthemum in a rice cake mold; second, a combination of radius jogakbo and geometrical pattern; third, a combination of vertical and horizontal forms of jogakbo and rice cake pattern; fourth, a combination of yeouijumunbo and butterfly pattern in rice cake mold. For the scarf design with these applications, technical skills such as repeat, rotation, symmetry, free setup, and distortion were used for the combination motif. In terms of the shape of the design, there are two, square and lengthwise tetragons.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.37-44
• /
• 2009

It is well known that a refrigerant-induced noise is caused by two-phase flow in the indoor unit of a heat pump air-conditioner. Especially when the flow pattern in a pipe is intermittent flow, the irregular noise occurs frequently. But it is very difficult to avoid this kind of the noise for the application of air-conditioner. Therefore, in this research, the flow patterns at two-phase flow state in a pipe of the indoor unit for the air-conditioner are researched using cycle simulator at typical cycle conditions. In order to find the relationship between refrigerant-induced noise and flow pattern, the noise patterns are investigated with respect to the estimated flow pattern from the various flow pattern maps. Base on the estimations of the flow patterns by those maps, the refrigerant-induced noise is evaluated as decreasing tube diameter, which can transit the flow pattern from slug to annular flow.

• 사상체질의학회지
• /
• 제29권4호
• /
• pp.326-335
• /
• 2017

Objectives The purpose of this study was to analyze the difference of cold-heat pattern according to sasang constitution. Methods 3891 subjects were joined in this study. The sasang cinstitution diagnosis were proceeded by sasang constitution experts. The questionnaires and anthropometric measurements of the subjects were collected. Results The effect of gender and body mass index on the cold-heat pattern according to sasang constitution were significant. The effect of age on the cold-heat pattern according to sasang constitution were not significant. The distribution of short form-12 and blood test on the cold-heat pattern according to sasang constitution were significant. Conclusions There were significant different distribution of cold-heat pattern asscording to sasang constitution by gender, body mass index, short form-12, blood test.

• PNF and Movement
• /
• 제1권1호
• /
• pp.1-9
• /
• 2003

Objectives: The main purpose of this study is to analyze the importance of the rotatory factor in PNF pattern. In this article has to analyze and clarify the importance of the rotatory factor in PNF pattern by comparing the general concepts, facilitation technics, and neuroscience of muscle spindle, etc. Methods: This is a literature study with books. Results : There is close relationships between the pattern in PNF and rotatory factor. PNF pattern is priorily made up the diagonal and spiral pattern. the rotatory factor influences and guides from the start to end in the pattern. Conclusions : Rotation component is most important of the three component that one flexion or extension, abduction or adduction and rotation. It is that provide longer muscle length and stimulate the muscle spindles.