• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제17권3호
• /
• pp.35-42
• /
• 2011

Efficient space plans are built upon relations of both human and physical compositions, and the standard of the interaction is basically the human scale. Especially in medical areas, the character of the users within human scale design environment is quite significant. Unlike large hospitals with great plans and scalability performed by experts, mid-sized clinics tend to have limited space, designed by non-specialists who highlight aesthetics over functionality in floor plans which leads to poor quality in medical service. For this reason, this study will include the application of human scale based therapy rooms within the clinic from a physical standpoint and will further analyze and pinpoint any room for improvement to further enable more efficient ergonomic space planning. In this study, theoretically will contemplate over human scale, mid-sized clinic, therapies, and therapists, while the case study will include status of the recent human scale based mid-sized clinic from a physical viewpoint, classification and analysis amongst human and physical compositions chosen by discretion from either a newly opened or a newly re-modeled clinic within the last 2 years, which has 15 beds or more, minimum 3 physical therapists, with more than 5 different therapy facilities in the metropolitan area in order to measure the human scale of therapy rooms in a mid-sized clinic. As a result, the area where improvement can practically be applied is the physical composition, which does not include human scale like human composition factors as therapists and patients, and hence, I suggest the human scale applied efficient medical space plan become the base of this study and look forward to subsequent improvement in the quality of medical services.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.177-188
• /
• 1997

This study describes the important information for establishing Human Computer Interface System for solving the large scale Traveling Saleman Problem in Printed Circuit Board production. Appropriate types and sizes of partitioning of large scale problems are discussed. Optimal tours for the special patterns appeared in PCB's are given. The comparision of optimal solutions of non-Euclidean problems and Euclidean problems shows the possibilities of using human interface in solving the Chebyshev TSP. Algorithm for the large scale problem using described information and coputational result of the practical problem are given.

• 한국생활과학회지
• /
• 제23권6호
• /
• pp.1013-1033
• /
• 2014

This study attempted to develop a valid and reliable instrument capable of measuring Korea midlife family resilience (The Korea Midlife Family Resilience Scale: KMFRS). An exploratory, non-experimental, cross-sectional, and quantitative design was used to develop and validate the KMFRS. A tentative factor structure of family resilience and an item pool of the scale were constructed through a comprehensive literature review and personal interview. The pilot study was conducted with 424 middle aged adults(40~59) to select items for a scale, resulting in a preliminary scale composed of 70 items. In the main study, the preliminary scale was administered to a national representative sample of 562 middle-aged Korean adults. The scale was filtered into 40 items by the item analysis and an exploratory factor analysis, resulting in 6 factors: Family Connectedness & Problem Solving, Family's Positive Perception of Adversity, Family's Economic Stability, Family Religion & Spirituality, Support of Extended Family, and Support of Friends & Neighbors. These 6 factors explained 61.82% of total variance. The findings of the current study indicate substantial support for the reliability and the validity of the KMFRS. Other challenges and suggestions for future research on family resilience scale are discussed.

• 한국가구학회지
• /
• 제12권2호
• /
• pp.73-80
• /
• 2001

The purpose of human factor study is to help the people in good conditions, and to increase the efficiency of physical productivity and mental creativity Also for the furniture design field, the applications of human scale dimensions are considered as the very important aspects. For the design of the office systems furniture, designer must consider the onveniences of variable users as much as possible. To design the office systems for the various work environment, it is necessary to analyze the human scale dimensions according to the furniture items and the user behaviors. In these days, many countries are interested about the workplace ergonomic regulations to reduce a class of injuries called ‘Musculoskeletal Disorders(MSDs)’ by controlling risk factors. In this study, I intend to research and to analyze the features of human scale dimensions and the user behaviors of office environment, and propose some office furniture design tips.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.211-217
• /
• 2012

Objective: The aim of this study is to show a correct application procedure using the compact Korean anthropometric data application program called Korean Human Scale(KHS) for anthropometric design. Background: The nation-wide anthropometric survey project called 'Size Korea' developed KHS and distributed it to the public on the web site. But some insufficiency of the current web service of KHS misleads the users; they just put their own statue and pick up a meaningless data for a body dimension. Method: This study provides five steps to follow to read appropriate data from KHS for an anthropometric design. Results: As a case study, the depth dimension of the supervisory and control console used in the Korea nuclear power plant was determined following the procedure and compared with the console design guideline recommendation. Conclusion: The supplementary anthropometry table should be added on the web service of KHS for users to read a meaningful data for design. Application: If properly used, the KHS has a lot more potential application area than users can expect such as in control center design area.

• 한국생활과학회지
• /
• 제16권6호
• /
• pp.1243-1250
• /
• 2007

The purpose of this study was to compare government guidelines and foreign guidelines related to furniture design for elderly. Future elderly will increasingly accustomed to the provisions of improved housing, education and welfare in comparison with our forebears. Also, there will be upgrading and different need for elderly furniture in our market. The results were as follows. The height of bed was based on the height of wheelchair seat, commonly. A adjustable bed was recommended for abled and disabled elderly. A pull-down shelf, drawer, empty space under chest, folding or sliding door in wardrobe and so on were recommended as a elderly furniture. It were good adjustable sink on human scale. There were need the empty space under sink for wheelchair users, one-touch or lever faucet, etc. There have given a little furniture design guidelines for elderly in Korea until now. But those guidelines haven't been considered enough human scale of elderly including wheelchair user. Because the close investigations have not made about abled and disabled elderly for their furniture design. So first of all, the government should be examined elderly physical size more accurately for elderly furniture design. The guideline for elderly furniture design should be for abled elderly and the disabled, too.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.132-138
• /
• 2016

The purpose of this study was to develop safety competences, a set of behavioral indicators of each competence and measuring methods of behavioral indicators for preventing human error of nuclear power plants(NPPs). The safety competences and behavioral indicators were derived from the five steps consisted of derivation of preliminary competence items through literature review, content analysis, interview(FGI, BEI), examination of content validity and decision making of final indicators. The results showed that 13 core safety competences and 35 behavior indicators were derived finally. In addition, the methods of measuring safety competences or behavioral indicators such as Behaviorally Anchored Rating Scale (BARS), Behavior Observation Scale (BOS) were developed and suggested.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권1호
• /
• pp.149-158
• /
• 2019

Due to the rapid development of IT (information technology) and internet, products become smart and able to collect, process and produce information and can think of themselves to provide better service to consumers. However, research on the characteristics of smart product is still sparse. In this paper, we report the systemic development of a scale to measure the perceived product smartness associated with smart product. To develop product smartness scale, this study follows systemic scale development processes of item generation, item reduction, scale validation, reliability and validity test consequently. And, after acquiring a large amount of qualitative interview data asking the definition of smart product, we add a unique process to reduce the initial items using both a text mining method using 'r' s/w and traditional reliability and validity tests including factor analysis. Based on an initial qualitative inquiry and subsequent quantitative survey, an eight-factor scale of product smartness is developed. The eight factors are multi-functionality, human-like touch, ability to cooperate, autonomy, situatedness, network connectivity, integrity, and learning capability consequently. Results from Korean samples support the proposed measures of product smartness in terms of reliability, validity, and dimensionality. Implications and directions for further study are discussed. The developed scale offers important theoretical and pragmatic implications for researchers and practitioners.

• 한국의상디자인학회지
• /
• 제3권1호
• /
• pp.47-55
• /
• 2001

The Human Sensibility Measurement Technology, the engineering discipline that translate the imagination and good impression of human being into a physical factor for relevant product, is important to improve the quality of industrial products. This dissertation is aimed at measuring and evaluating the human sensibility for texture I presented the image scale in expectation of applying it to the production and choice of goods fitting into one's sensibility and to the coordination of goods which have similar images.

• Journal of Information Processing Systems
• /
• 제14권6호
• /
• pp.1494-1507
• /
• 2018

Intelligent human identification using face information has been the research hotspot ranging from Internet of Things (IoT) application, intelligent self-service bank, intelligent surveillance to public safety and intelligent access control. Since 2D face images are usually captured from a long distance in an unconstrained environment, to fully exploit this advantage and make human recognition appropriate for wider intelligent applications with higher security and convenience, the key difficulties here include gray scale change caused by illumination variance, occlusion caused by glasses, hair or scarf, self-occlusion and deformation caused by pose or expression variation. To conquer these, many solutions have been proposed. However, most of them only improve recognition performance under one influence factor, which still cannot meet the real face recognition scenario. In this paper we propose a multi-scale parallel convolutional neural network architecture to extract deep robust facial features with high discriminative ability. Abundant experiments are conducted on CMU-PIE, extended FERET and AR database. And the experiment results show that the proposed algorithm exhibits excellent discriminative ability compared with other existing algorithms.