• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.115-116
• /
• 2010

본 연구에서는 1988년 이후에 중력하중에 대하여 설계되고 국내 철근 관행에 따라 배근된 철근콘크리트 골조 외부접합부의 거동 특성에 대하여 연구하기 위하여, 4개의 T형 부분골조 실험체를 만들고 변위비가 3.5%에 도달할 때까지 변위 하중을 가력하였다. 모든 시험체는 변비위 1%에 도달하기 전에 접합부에 파괴가 발생하여 FEMA의 제안치보다 작게 나타났으며, 종국강도가 휨 공칭강도에 의한 내력의 0.85배 이하로 나타났다.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.551-560
• /
• 2001

낙동강의 화원-교령교-현풍 수위관측소 구간에 대하여 수리학적 하도추적을 통하여 조도계수를 추정하였다. 세 관측소의 연속 수위자료와 하천 종횡단 측량자료만이 이에 사용되었다. 하도추적에 의해 계산된 유량자료로부터 수위-유량 관계식을 작성하였으며 이는 기존의 수위-유량 관계식보다 나은 결과를 보였다. 수위측정 오차가 유량계산에 미치는 영향에 대하여 분석하였으며, 측방유입류를 억제할 수 있도록 하도길이를 제한하는 방법도 제시하였다.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.99-106
• /
• 2004

In developing criteria for establishing workstation reach limits, it is essential to select the appropriate anthropometric stereotype for solving a specific design problem. The most important factor for comfortable workstation is to eliminate trunk flexion from the neutral (upright) posture. A solution to this design can be developed using population stature and link length data. This paper provides a methodology for design of comfortable workstation using anthropometric stereotype. Application of this methodology can be utilized in various designs for work space including standing and sitting workplace. For the purpose of this study, the data are measured by some parts on body such as stature, arm length, wrist height, elbow height, and shoulder hight. The samples for this study are randomly chosen from university students in Seoul and Kangnung during sixteen months (2003.3-2004.6).

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.15-26
• /
• 2002

The anthropometric characteristics of the intended user population are most important parameters in the equipment and workplace layout design, particularly in the airplane cockpit design. Because human body is composed of multi-dimensional body segments, single 'average' or 'extreme' manikin is not sufficient in computer-aided design(CAD) environments. To overcome this limitation, we constructed a manikin group representing Korean Male pilot population. First, we identified 16 anthropometric variables which are important parameters in the evaluation of reach, visibility, and clearance. And we found their correlations and conducted a factor analysis. Four common factors were extracted in the factor analysis. The first one was related with length dimensions, the second was with the arm reach, the third was with the sitting height, and the last was with breadth-depth dimensions. Finally, 17 manikins were constructed and presented in the CAD prototype.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.133-138
• /
• 2010

The environmental regulation of a product is a global trend. The environmental regulation directives such as RoHS, WEEE, ELV and REACH have impacted Korean export-oriented auto parts manufacturer and affects the export of the product to aboard. In electronics manufacture and auto parts manufacturer, there are different systems for environmental regulation compliance. Nowadays the automotive mechatronics parts in a car are increasing. The HEV and intelligent car will need more mechatronics parts. It is necessary to apply the environmental regulation system of electronics to the automotive parts. In this paper, we proposed the application of PDX standard used in electronic industry to the BOM of the auto parts manufactures and showed an example of generated BOM for selected auto part using PDX. The PDX-based BOM can be used for the recording of environmental substances of the automotive mechatronics part and help the collaboration across auto parts manufactures in accordance with environmental regulation.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.436-441
• /
• 2014

We have demonstrated an amplified wavelength-division multiplexed (WDM) passive optical network (PON) by using broadband light source (BLS) seeded optical sources and chirped fiber Bragg gratings (FBGs) based dispersion compensators. Chirped FBGs located at central office (CO) were fabricated and used as channel-by-channel dispersion compensators in order to mitigate the dispersion-induced distortion of both downstream and upstream signals. Owing to a low insertion loss of chirped FBG based dispersion compensator, the optical signal-to-noise ratio (OSNR) of the downstream signal could be improved to be ~28 dB. Thus, we re-confirmed that an error-free transmission of 1.25 Gb/s signals over a 100 km single-mode fiber (SMF) link could be achieved with a proposed amplified WDM-PON architecture. We have also evaluated the impact of various noises on the system's performance, and found that the low OSNR of the downstream signal would be a main limiting factor on the maximum reach of the proposed amplified WDM-PON architecture. From the measured ~13 dB improvement in OSNR of the downstream signal compared to our previously-proposed dispersion compensating module based scheme, we believe that the proposed architecture can accommodate a reach of longer than 100 km SMF link easily.

• 한국지형학회지
• /
• 제19권1호
• /
• pp.29-40
• /
• 2012

두만강 하류의 사구는 주로 북서계절풍의 영향을 받아 겨울철 풍향과 일치하는 방향성을 나타내고 있다. 사구가 발달한 지역의 인근 두만강 하상에는 사질성의 사주와 하중도가 형성되어 있다. 단면기술과 입도특성분석으로 볼 때 연구지역 사구의 형성과정은 퇴적환경에 따라 두 종류로 나눌 수 있다. 첫째, 회룡봉, 경신-원정 및 두만강변 사구는 두만강이 운반해온 충적물이 하상에 퇴적되고, 다시 바람에 의해 인근의 사주단, 단구면과 보다 고도가 높은 침식 구릉지 등에서 퇴적된 것이다. 둘째, 방천-노동자지역에서의 이동사구는 첫 번째 유형과 유사하게 형성되었지만, 정착 사구는 수중환경에서 퇴적된 것으로 사료된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.152-152
• /
• 2019

This study demonstrates a novel approach of remotely sensed estimates of stream flow at fifteen hydrological station in the Han River Basin, Korea. Multi-temporal data of the European Space Agency's Sentinel-1 SAR satellite from 19 January, 2015 to 25 August, 2018 is used to develop and validate the flow estimation model for each station. The flow estimation model is based on a power law relationship established between the remotely sensed surface area of water at a selected reach of the stream and the observed discharge. The satellite images were pre-processed for thermal noise, radiometric, speckle and terrain correction. The difference in SAR image brightness caused by the differences in SAR satellite look angle and atmospheric condition are corrected using the histogram matching technique. Selective area filtering is applied to identify the extent of the selected stream reach where the change in water surface area is highly sensitive to the change in stream discharge. Following this, an iterative procedure called the Optimum Threshold Classification Algorithm (OTC) is applied to the multi-temporal selective areas to extract a series of water surface areas. It is observed that the extracted water surface area and the stream discharge are related by the power law equation. A strong correlation coefficient ranging from 0.68 to 0.98 (mean=0.89) was observed for thirteen hydrological stations, while at two stations the relationship was highly affected by the hydraulic structures such as dam. It is further identified that the availability of remotely sensed data for a range of discharge conditions and the geometric properties of the selected stream reach such as the stream width and side slope influence the accuracy of the flow estimation model.

• 한국환경보건학회지
• /
• 제45권2호
• /
• pp.173-185
• /
• 2019

Objectives: The objectives of this study are to evaluate the accuracy and precision of exposure model ECETOC TRA v.3.1 by comparing model predictions with repeated exposure measurements in Korean workplaces and to investigate the applicability of ECETOC TRA to Korean workplace exposure assessment in K-REACH. Methods: Measured values and work conditions for 14 kinds of chemicals collected from exposure field surveys conducted at 10 companies in Korea were utilized for this study. All possible process categories (PROCs) considered to be relevant to each work process classification were selected and applied to ECETOC TRA as major determining parameters. In order to quantify the accuracy of the model, the lack of agreement (bias, relative bias, precision) was calculated and the risk ratios for each exposure situation between estimated and measured were also compared. Results: The estimated values varied between five and 25 times according to the PROCs for all exposure situations (ESs) based on tasks/chemicals. The results showed that most of the estimated values were below the measured values, and just 13 of 53 tasks were above the measured values. The overall bias and precision were $-2.91{\pm}1.62$ with ECETOC TRA, and we found that ECETOC TRA showed a low level of conservatism when applied to Korean workplaces, similar to previous studies. Conclusions: This study demonstrates that the existed PROC codes have limitations in fully covering various ESs in Korea. In order to improve the applicability of ECETOC TRA in K-REACH, the addition of new PROCs for Korean industries are necessary.

• 한국수자원학회논문집
• /
• 제42권8호
• /
• pp.619-629
• /
• 2009

본 연구는 하상마찰의 척도인 등가조고를 이용하여 자갈하천의 하상저항을 산정하는 것이다. 이를 위하여 국내 8개 자갈하천에서 실측을 통하여 마찰계수 f를 산정하였고, 하상재료의 누가입경분포를 조사하였으며, 각 단면의 실측 마찰계수를 나타내기 위하여 대수 연직유속분포를 가정하여 계산된 평균 등가조고와 누가입경분포를 이용하여 계산된 구간 등가조고를 비교하였다. 더불어 등가조고를 사용하여 계산된 Manning 계수를 Strickler 유형의 기존 경험식에 의한 Manning 계수와 비교함으로써, 국내 자갈하천에서 기존 경험식을 이용한 하상저항 산정의 적용성을 검토하였다. 분석결과, 구간 등가조고가 대상구간의 하상특성을 대표할 수 있음을 확인하였고, 구간 등가조고로 계산된 Manning 계수가 실측 자료로부터 계산된 Manning 계수와 비교하여 RMS 오차가 0.003이하로 계산되어 실무 적용에 타당할 것으로 판된되었다. 또한 실제 하천에서 등가조고 $k_s$와 특정입경 $D_i$과의 비례계수 사이의 상관성이 적은 것으로 나타나, 하상 특정입경을 사용하여 Manning 계수를 산정하는 기존 경험식을 적용할 때 적절한 방정식의 선택에 어려움이 있을 것으로 판단된다.