• Elastomers and Composites
• /
• 제52권4호
• /
• pp.309-316
• /
• 2017

In injection molding, the quality of an injection molded product varies greatly depending on the molding conditions. Many researche studies have been conducted on the quality analysis of molded parts according to the molding conditions such as injection pressure, injection temperature, and packing pressure. However, there have not been many studies on the V/P switchover timing. It is known that when a large pressure is applied to a cavity in the packing phase, the cavity pressure is most affected by the packing pressure. In addition, depending on the position (timing) of the packing pressure, it can have a direct influence on quality based on the shrinkage and dimensions of the molded parts. In this study, the change in pressure profile in the cavity according to the V/P switchover position is confirmed. A CAE analysis program (Moldflow) was used to simulate and analyze two models using the PC and PBT materials. In order to compare these results with the actual injection molding results, injection molding was performed for each V/P switchover position, and the correlation between simulation and experiment, especially for the shrinkage of molded parts, was evaluated.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.863-867
• /
• 2013

A series of azo disperse dyes having dicyanovinyl groups was synthesized by the Knoevenagel condensation with malononitrile from carbonyl substituted phenylazo disperse dyes which were prepared by conventional diazo coupling reaction of aniline derivatives as diazo components. A variety of coupling components such as anilines, an indole and a pyridone were used. The azo disperse dyes were evaluated for their spectral properties and dyeing assessment on the polyester fabrics. The azo disperse dyes containing dicyanovinyl groups showed bathochromic shifts and darker colors due to increased electron withdrawing strength in their azo components and extended conjugation by dicyanovinyl groups than their parent carbonyl substituted azo dyes. The dyes containing 2-acetylamino-5-methoxy substituent in the coupling component exhibited higher wavelength of maximum absorbance (${\lambda}_{max}$) and significant negative solvatochromism than those of other dyes due to intramolecular hydrogen bonding.

• Archives of Pharmacal Research
• /
• 제29권12호
• /
• pp.1125-1131
• /
• 2006

This study was undertaken to elucidate the effect of diallyl disulfide (DADS), an oil-soluble organosulfur compound found in garlic, in suppressing human nasopharyngeal carcinoma cells. A potent increase (of at least 9-fold) in apoptotic cells has accompanied 1) a decrease in cell viability, 2) a increase of the fraction of S-phase cells by up to 63.8%, and 3) a transient increase of the phospho-p38 and phospho-p42/44 (phosphorylated p38 MAPK and phosphorylated p42/44 MAPK) in a time-and concentration-dependent manner. These results indicate that DADS can induce apoptosis in human nasopharyngeal carcinoma cells via, at least partly, S-phase block of the cell cycle, related to a rise in MAPK phosphorylation.

• 한국미생물·생명공학회지
• /
• 제22권2호
• /
• pp.182-189
• /
• 1994

The highest antitumor activity was observed in water soluble AS fraction of the Ganoderma lucidum IY 009. AS fraction did not show any cytotoxicity on sarcoma 180 cell but stimulated antibody production, opsonization of macrophage in ICR mouse and superoxide ion production from isolated macrophage. AS fraction activated complement C3 in human serum, and their antitumor activity was inhibited by EDTA, a chelator of cation related complementary activation. AS fraction exerted om prolong of life span and ingibition of tumor growth in the leukemia P388 or L1210 transplanted inbreed mouse,k BDF1 but krestin did not. AS fraction did not show any serious and lethal effects through oral administration on ICR mouse, and LD$_{50}$ of those was above 2,230 mg/kg.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.301-307
• /
• 2016

Additive manufacturing (AM), so called 3D Printing is a new manufacturing process and is getting attraction from many industries. There are several methods of 3D printing. Among them fused deposition modeling (FDM) type is most widely used by reason of cheap maintenance, easy operation and variety of polymeric materials. Articles manufactured by 3D printing have weak deposition strength compared with conventionally manufactured products. Deposition strength of FDM type 3D printed article is highly dependent of deposition temperature. Subsequently the nozzle temperature in the FDM type 3D printing is very important and it is controlled by heat source in the 3D printer. Nozzle is connected with heat block and barrel, and heat block contains heat source. Nozzle becomes hot through heat conduction from heat source. Nozzle temperature has been predicted for various thermal boundary conditions by computer simulation and compared with experimental measurement. Nozzle temperature highly depends upon thermal conductivities of heat block and nozzle. Simulation results are good agreement with experiment.

• Ocean and Polar Research
• /
• 제21권2호
• /
• pp.149-157
• /
• 1999

Surface sediment samples collected from the eastern half of the Yellow Sea proper in 1998 were analyzed for polycyclic aromatic hydrocarbons (PAHs), ubiquitous pollutants. Total PAHs concentrations varied from 1.0 to $320.5ng\;g^{-1}$ dw. Relatively high concentrations of PAHs were found in the muddy central part of the Yellow Sea. Sedimentary total PAHs concentrations in the Yellow Sea proper were similar to those of Californian offshores and the central Mediterranean Sea, albeit an order of magnitude lower than the Yellow Sea nearshore areas. Phenanthene/Anthracene concentration ratio of PAHs in bottom sediments suggested that pyrolytic PAHs might be dominant over petrogenic ones in the eastern Yellow Sea. Downcore depth distributions of PAHs from the relatively undisturbed core samples of the central Yellow Sea showed decreasing PAHs concentrations with core depths and suggested that the Yellow Sea has been increasingly exposed to PAH for decades. Annual total PAH flux to these sediments was estimated to be $166{\mu}gm^{-2}yr^{-1}$ in the central part of the Yellow Sea for the recent decade.

• Archives of Pharmacal Research
• /
• 제22권6호
• /
• pp.565-570
• /
• 1999

DW2282,(S)-(+)-4-phenyl-1-[1-(4-aminobenzoyl)-indoline-5-sulfonyl]-4,5-dihydro-2-imidazolone hydrochloride, is a new anticancer agent which is thought to exhibit a characteristic mechanism of action in the inhibition of tumor growth. In this study, we estimated the toxicities of DW2282 in mice. When mice were orally dosed for five consecutive days at the dosages of 50, 100 and 150 mg/kg, DW2282 did not induced methemoglobinemia and hypoglycemia at any of these doses. However, increased ALT and AST values were observed in the 150 mg/kg dosing group, and white blood cells (WBC) were significantly decreased at all doses. However, the changes in WBC count, ALT and AST immediately reversed after the cessation of drug administration. In addition, we found that DW2282 did not cause an increase in hemolysis in human blood. Taken together, these data suggested that DW2282 may have a relatively low level of toxicity, and that there may be a quick recovery from any toxicity it dose produce.

• 약학회지
• /
• 제38권5호
• /
• pp.586-594
• /
• 1994

The general pharmacological effects of DWQ-013, a new synthetic quinolone antibacterial agent, were examined on the central nervous system in experimentral animals and the following results were obtained. Drug interaction of DWQ-013 with theophylline, fenbufen and nonsteroidal antiinflammatory drugs was also examined. DWQ-013 decreased touch escape effect on the general behavior and decreased body temperature at a concentration of 1000 mg/kg in mice. But DWQ 013 had no effect on the locomotor activity, rotarod perfomance and traction test in mice. Furthermore, DWQ-013 increased pentobarbital-induced sleeping time and affected the onset time in acetic acid-induced writhing test in mice. DWQ-013 reduced onset time and death time on strychnine-induced convulsions and death time on pentylenetetrazole-induced convulsions at a concentration of 1000 mg/kg in mice. But, the drug had no effect on the electroshock. DWQ-013 did not interact with fenbufen and any other NSAIDs but it did interact with theophylline. From these results, it could be suggested that DWQ-013 had less pharmacological effect than other quinolones on the central nervous system.

• 약학회지
• /
• 제42권1호
• /
• pp.108-113
• /
• 1998

G009, a polysaccharide isolated from the mycelia of Ganoderma lucidum IYO09, showed a hepatoprotective activity against $CCl_4$ induced cytotoxicity in primary cu ltured rat hepatocytes. Incubation of $CCl_4$-intoxicated hepatocytes with G009 significantly reduced the levels of glutamic pyruvic transaminase and sorbitol dehydrogenase released from hepatocytes in the medium. G009 showed antioxidative effect by elevating the activities of glutathione reductase and superoxide dismutase, and the content of glutathione in $CCl_4$-intoxidcated primary cultured rat hepatocytes. Furthermore, G009 significantly elevated glutathione-S-transferase activity in $CCl_4$-intoxicated primary cultured rat hepatocytes. G009 also reduced the production of malondialdehyde, a byproduct of lipid peroxidation. From these results, it could be concluded that G009 exerted hepatoprotective activity against $CCl_4$-induced cytotoxicity through antioxidation.

• 분석과학
• /
• 제19권3호
• /
• pp.203-210
• /
• 2006

Octopole reaction cell inductively coupled plasma mass spectrometer (ORC-ICP-MS)를 이용하여 우유 분말시료 중 극미량의 셀레늄(Se)을 정량하였다. 반응가스로 $H_2$를 사용함으로써 극미량 측정에서 발생되는 다원자 이온 종들과 공존 원소에 의해 발생되는 분자들의 방해를 현저하게 제거하였다. Normal mode에 비해서 $H_2$ cell gas mode는 정확성과 정밀성을 크게 향상시켰으며, 우유 표준시료의 보증 값에 비해 정량한 결과는 평균 102.7%로 약간 높게 나타났고, 5회 정량한 값에 대한 상대표준편차는 7.6%이었다.