• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.1
• /
• pp.80-90
• /
• 2014

In architecture projects, BIM library has widely been using for prefabrication of products and design process. However, since the shape of structures is different by each project in civil engineering projects and a shape representation system is complicated, it is not easy to develop a standardized BIM library. To solve these issues, this study develops BIM library based on standardized 2D shop drawings for civil structures. The standardized shop drawings, which are the targets of the BIM library model, should be first selected. Besides, in order to define modeling scope with the level of general and shop drawings for each structure, LOD(Level of Detail) and breakdown structure are determined, and development methods of families of 3D object type including 2D profile and rebar through commercial software are established. With these, properties of BIM library are configured, and a utilization model of the BIM libraries is constructed for 3D modeling and a simulation using the BIM library. Therefore, this study can identify properties that are necessary when IFC schema is configured for civil engineering projects. For future, it is expected that easiness of BIM design for the civil engineering projects and generation, management, and analysis system of BIM library for road projects will be secured.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1275-1282
• /
• 2009

The tunnel excavations are used for construction of common utility tunnel, electric tunnel, communication line tunnel, water supply and public sewerage pile line in urban area. The trench cut methods were mainly used in the past, but now, tunneling method is more being used. The tunnel excavation method like as NATM, Messer-Shield, Semi-Shield Methods are being applied to small section tunnel in Korea. The actual construction results of seme-shield method are increasing due to simplified construction process and reduced noise and vibration. And also this method is being used frequently in waterway tunnel and construction of prevention flooding recently. The seme-shield method design guideline is absence except for electric line tunnel construction in Korea, because of the semi-shield method was developed in Europe and Japan. In the prescriptive design, engineer's subjects are tending to intervene, because of absence of standard and specification for details. Therefore, Design and Construction Problems of Semi-Shield Method were described and construction trouble was introduced for exam. These problem and construction troubles have to be examined thoroughly in advance.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.107-117
• /
• 1997

It is necessary to evaluate HMI inaspects of human factors in the design stage of MMIS(man machine interface system) and feedback the result of evaluation because operators performance is mainly influenced by the HMI. Therefore, the MMIS design should be reflected the operators psychological, behavioral and physiological characteristics in the interaction with human machine interface(HMI) in order to improve the safety and availability of the MMIS of a nuclear power plant(NPP) by reduction of human error. The development of human factors experimental evaluation techniques and integrated test facility(ITF) for the human factors evaluation become an important research field to resolve hi,am factors issues on the design of an advanced control room(ACR). We developed am ITF, which is aimed to experiment with the design of the ACR and the human machine interaction as it relates to the control of NPP. This paper presents the development of an ITF that consists of three rooms such as main test room(MTR), supporting test room(STR) and experiment control room(ECR). And, the ITF has a various facilities such as a human machine simulator(HMS), experimental measurement systems and data analysis and experiment evaluation supporting system(DAEXESS). The HMS consists of full-scope simulation model of Korean standard NPP and advanced HMI based on visual display nits (VDUS) such as touch color CRT, large scale display panel(LSDP), flat panel display unit and so on.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.264-271
• /
• 2011

ILS(Instrument Landing System) is the international standard system for approach and landing guidance. ILS was adopted by ICAO(International Civil Aviation Organization) in 1947 and is currently being used in commercial systems. To design the digital transmitter and receiver modules that can be mounted in the integrated ILS, we propose the digital design methods of digital double AM modulator and demodulator using FPGA chip, DDS(Direct Digital Synthesizer) for generation of sampling clock, demodulator of DDC(Digital Down Converter) structure, and spectrum analyzer using DSP chip. We demonstrate the efficiency of the proposed design method through experiments using developed transmitter and receiver modules. This system can be used as a high-performance commercial system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4108-4114
• /
• 2010

The automation of the machining and manufacturing process of press die is designed to shorten the working time by avoiding unnecessary repetitive works and to obtain subject articles with standard quality. Automation as used in this paper includes 3-D die design, machining center, wire-cut electrical discharge machining, and drawing works. This paper deals with research work on the automation of the machining and manufacturing process of the press die after 3-D die design using the Irp bracket for the control box sensor. The research was conducted under the same setting as that of die design.

• Archives of design research
• /
• v.16 no.1
• /
• pp.93-102
• /
• 2003

This thesis is a study for the standardization of the design of ginseng cultivating facility (also known as the sun off facility) for the improvement of farming environment. The core background of this study is to propose a basic study for introducing, for the first time, the modern ginseng cultivating facility that matches the position of korea as a main nation cultivating ginseng and to secure the production and quality value of Koryo Ginseng, which is a special world-level agricultural product of Korea, under the present WTO agricultural product open system. Right now, wood, rice straw, or vinyls, which are non-standardized or are for one-time use only are used. Therefore, as a concept of the design, 1 tried to revise the fact that these materials are being used to set up the facility repeatedly every year which is creating environmental pollution and wasting of our countries labor and resource. Concrete factors to be improved are as follows: First, standardization of the form and structure of mass production system; Second, introduction of new materials such as semi-permanent resin etc., for standardization of materials; 1 tried to make the above two factors into a shape based on a Korean image. As for the design, designed a standard unit model of the ginseng cultivation facility especially keeping in mind to design it so the facility can be freely connected and assembled according to the size and shape of the cultivation area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.212-220
• /
• 2011

These days, many cable-stayed bridges were constructed in accordance with the trend in Korea. At the moment, construction technology of cable-stayed bridges has been remarkably developed but design technology still relies upon foreign technology very much. The cable anchor system that is one of key technologies of cable-stayed bridge brings powerful cable tension to produce local stress concentration and to disturb stress seriously, so for safety must be designed by a local detailed analysis is required. But without a clear design standard or design theory relying on F.E.M, and engineers don't understand theoretical basic mechanism of cable anchor system. As a result, engineers can be lose their judgement. Accordingly, this study examined theoretical design flow of fixing pipe in guide pipe-anchor system and additional considerations, in accordance with design standards at home and abroad to keep them in order and to suggest supplementary design flow.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.1
• /
• pp.47-56
• /
• 2015

Purpose : As the number of the transportation poor has increased, the application of Universal Design on urban railway station has recently been focused. However, the current criteria used in domestic areas did not show the characteristic of facilities within urban railway station. Therefore, this study aims to explore the detailed criteria in applying ideas from Universal Design to sanitary facilities, especially toilets within railway station. Method : This study explores the criteria by evaluating findings from previous studies. First, the current situation of sanitary facilities in railway station is assessed. Then, the detailed criteria applicable to railway station toilets are concluded, by reviewing types of transportation poor and principles of Universal Design. Result : Findings from this study are as follows. First, the current criteria applied to railway station toilets lack ideas of Universal Design, so the better criteria applicable to sanitary facilities in railway station are necessary. Second, standard criteria used in domestic areas with newly additional criteria suggest that sanitary facilities should be established according to those criteria. Taken together, the better sanitary facilities should be provided to railway users through the application of Universal Design to railway station toilets. Implication : For the future users in railway station toilets, the additional research on types of diverse space and other sanitary facilities within railway station should have been continued.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.104-109
• /
• 2018

This paper presents a hardware design for the block encryption algorithm of ARIA which is used for standard in Korea. It presents a hardware-efficient design to increase the throughput for the ARIA algorithm using a high-speed pipeline architecture. We have used ROM for the S-box implementation. This approach aims to decrease the critical path delay of the encryption. In this paper, hardware was designed by VHDL, realized RTL level by Synplify which is synthesis tool and verified simulation by ModelSim. The ARIA algorithm is shown 68.3 MHz (Maximum operation frequency) to use Xilinx VertxE XCV Series device.