• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.85-94
• /
• 2006

The purpose of this study is to extract typical body shapes of Korean adults based on the three-dimensional Korean anthropometric data measured through 5th national anthropometric survey and to examine the suitability of the 3-D human shape data for the interior packaging. 36 three-dimensional anthropometric variables related to the design of vehicle interior were considered for the appraisal of typical body shapes. Four major factors were extracted by the factor analysis and factor scores were calculated for all subjects. Typical or standard drivers of Korean adults were selected by the minimum deviation criteria for the four factor scores with respect to 5th, 50th, and 95th percentiles, respectively. Typical drivers of Korean adults were visualized by the CATIA-HUMAN program due to the absence of proper application software for three-dimensionally scanned human body data. There are considerable differences between the anthropometric data of Korean adults and those provided by CATIA-HUMAN program, which shows that the modeling data provided by CATIA-HUMAN should not be directly applied to the ergonomic evaluation for the vehicle design. This suggests the necessity for the development of suitable software for scanned human shape data. It is also expected that the anthropometric data of typical drivers extracted from this study help design package layouts and improve the suitability of ergonomic evaluation for Korean customers.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.5-9
• /
• 2016

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.603-611
• /
• 2016

Educational games offer an opportunity to engage and inspire students to take an interest in every subject material in school. The "fun" obtain when playing games become a trigger for the use of games in learning. However, there are doubts whether the players actually learn while they are having fun. Vidyanusa is an Online Mathematics Education Game being developed by Crayonpedia Education Ecosystem in Indonesia. The learning goal of Vidyanusa is to engage junior high school students in learning mathematics. In this paper, we design the Vidyanusa game material Functions and Relations by using Balanced Design Approach. This approach has three models in succession; the Content Model outlines the purpose of the game, the Task Model maps out the mission, and the Evidence Model outlines student measurement. This paper will then discusses the quality of games produced in term of Usability factor for effective results and objective. The measurement of the game was carried out based on International Standard ISO/IEC 9126-1 FDIS about Software Quality Product.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2016

Since 2014, MOLIT (Ministry of Land, Infrastructure, and Transport) is carrying out a KASS project to develop and construct Korean SBAS. KASS can cause damage of human & properties if it has some problem during operation. Therefore, system safety assessment for KASS development is very important. Principal point of system safety assessment is the allocation of DAL(design assurance level) based on the hazard identification and classification. In this parer, the author conducts the allocation of DAL for KASS & its sub-systems based on the international standard(SAE ARP4761), which suggests a best practice of aviation system safety assessment. The result of this paper are the first step of system safety assessment, and can be used for further system safety assessment of KASS project.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.225-231
• /
• 1997

The dynamic characteristics of Control Element Drive Mechanism(CEDM) for Korea Standard Nuclear Power Plant are studied with the CEDM modeled as a secondary mass in a simplified two degree of freedom system, while the reactor vessel as a primary mass. The optimal .mu.-f curve is developed to reduce the response amplitudes of both primary and secondary masses. In order to improve a design it is proposed that the natural frequency ratio, f, should be converged to 0.93, the mass ratio, .mu., should not be reduced, and the result should be converged to the optimal .mu.-f curve. Optimal design for CEDM components has been carried out and the response amplitude ratios of reactor are reduced 10.5 - 19.7% while those of CEDM are reduced 6.3 - 3.4%.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.133-143
• /
• 2014

The purpose of this article is to search stakeholders' recognition related to Fire Construction Surveillance system; a client(order), fire fighting officer, supervision company, construction company, design company, other. The paper provides 4 important things. Firstly, a client(order) suggested the lowest recognition in the needs about the need of separation order, that of contract for any construction work limited registered companies, and that of standard price for engineering.. Secondly, the design company is lowest recognition in guidance and control participating in construction-design phase. Thirdly, the design company is lowest in adjustment about manpower-allocation according to allocation criteria of technical manpower. Fourthly, a client(order) and supervision company are relatively lower than other stakeholder in necessity on special education and training system for auditor in fire protection construction. Almost all related matters are related to more or less stakeholders' interest.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.613-627
• /
• 2010

Ships and off-shore plants have very long lifecycles. Design data of ships and off-shore plants are used as master data in the subsequent phases after the design phase. Therefore, it is an important issue how to convert native design data generated from commercial shipbuilding CAD systems into neutral data with the use of international industrial data standards. International standard-based exchange of ship outfitting and off-shore plant data needs the construction of a library for specifications data of equipment and materials and the provision of external referencing mechanism for retrieving data stored in the library. This paper proposes an approach to construct a specifications data library with the use of ISO 15926 process plants. This library is used for providing specifications data through external referencing when translating ship outfitting data from TRIBON system into ISO 10303 STEP AP 227-formed data.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.67-74
• /
• 2001

This paper presents the Safe Shutdown Earthquake(SSE) input motion for the seismic design of the Advanced Power Reactor 1400(APR1400). The Design Ground Response Spectra(DGRS) far the SSE is based on the design spectrum specified in regulatory Guide(RG) 1.60 of U.S. Nuclear Regulatory Commission(US NRC), anchored to a Peak Ground Acceleration(PGA) of 0.3g and enriched in the high frequency range. This SSE seismic input motion is to be applied to the seismic analysis as the free-field seismic motion at the ground surface of both the rock and generic soil sites fur APRI1400. The enrichment for APR1400 seismic input motion is performed considering the current US NRC regulations, the seismic hazard studies performed by the Lawrence Livermore National Laboratory (LINL) and Electric Power Research Institute(EPRI) for the Central and Eastern United States nuclear power plant sites, and the seismic input motions used in the design certifications of the three existing U.S. advanced standard plants. It is represented by a set of DGRS and the accompanying Target Power Spectral Density(PSD) Function in both the horizontal and vertical directions.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1584-1595
• /
• 2017

Each cultural community has developed a variety of fonts to express their own language and characters. Hangul has also diversified its font shapes through changing the composition ratio and look of the consonants and vowels. Rather, thanks to the variety of these fonts, a considerable amount of time and effort must be devoted to the selection of a specific font shape. This is related to the fact that the current Hangul service and classification system process the font only with its name or the name of the manufacturer. It means that there is no consensus about the font shape classification system for Hangul. In this study, we propose a shape property set that can be a basis for classifying Hangul fonts. The font shape property set was generated by performing statistical analysis with features which have been studied by the font design experts and was verified through questionnaire using representative fonts based on the classification scheme defined by the Hangul font design classification system standard. This study is meaningful in that it is a study on shape classification properties of K-means and PCA statistical techniques based on font data rather than design field study.