• Journal of the Korean GEO-environmental Society
• /
• v.21 no.2
• /
• pp.5-13
• /
• 2020

The relief wells have been studied to be effective in seepage control in small dams such as agricultural dams. However, quantitative studies on the effects of the relief well are rare and there is no design standard also. To quantitatively analyze the effects of the seepage control in small dams, the research of up-lift pressure influencing the toe of dam body was conducted by seepage analysis, which investigates the behavior characteristics, according to the conditions of dam and foundation. The effect of seepage control was studied by analyzing the reduction effect of up-lift pressure at foundation ground of the toe of downstream dam slope depending on the installation of the relief well. As a result, it was found that the relief wells are effective in reducing the pore water pressure in the foundation, which can cause piping and sliding failure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1722-1727
• /
• 2011

The Korea Army are developing the TICN(Tactical Information Communication Network) which is the next army tactical communication system. The TICN tactical backbone's ability is very important. So analysis of the standard protocol for the data transmission guarantee are obliged. For the TICN tactical backbone, previous paper analysed routing protocol efficiency index and compared to superiority of the OSPF and IS-IS protocols in the tactical environment and conclusively IS-IS protocol was more suitable for TICN backbone routing protocol. And We got the result that It could improve the performance of IS-IS protocol as a TICN tactical backbone protocol under the tactical environments by adjusting some time parameters of IS-IS protocol. This paper modified and designed the IS-IS protocol in order to support the QoS strategies of TICN and analyzed it's adaptability through simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.85-93
• /
• 2012

In this paper, I designed the satellite system, using the MF-TDMA (Multi Frequency-Time Division Multiple Access) DAMA (Demand-Assigned Multiple Access) method, that allocates the satellite resources more effectively to prevent a large quantity data discard when Earth Terminals (ETs) request their satellite network resource to Network Controller (NC) by using their history information, such as traffic pattern or traffic class which have been receiving, and the network controller allocates the satellite network resource and send to earth terminals by using his history information that earth terminals have been requested already. The U.S. Military Warfighter Information Network-Tactical (WIN-T) community has selected the L-3 Linkabit MF-TDMA DAMA Network Centric Waveform (NCW) as the networking standard for full-mesh IP over SHF satellite communications. In the MF-TDMA DAMA satellite network, network controller allocates the satellite network resources and enables maximum 255 earth terminals to communicate each other for periodic satellite network resource requests of earth terminals.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.54-66
• /
• 2016

In this study, the absorbing boundary condition was adopted to prevent elastic wave propagation due to abrupt load condition changes in moving force analysis. It was proven to be effective in reducing inappropriate noise components. Furthermore, to verify whether fixed point excitation in a laboratory test can simulate train movement effectively, the results of dynamic analysis for fixed point excitation and moving force conditions were analyzed. The dynamic stability of an asphalt track structure under a KTX train condition was also studied. Additionally, the dynamic safety of asphalt tracks was verified by comparing the results of a moving force analysis under a KTX train load and a quasi-static analysis under the design standard Korean train load.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2017

Objective: Elderly people with dementia experience not only cognitive dysfunction but also motor function deficits, such as balance and gait impairments. Recently, transcutaneous electrical nerve stimulation (TENS) has been used to reduce pain as well as to control muscle spasm, spasticity and motor performance in various types of subjects. The purpose of this study determined the effect of a single trial TENS on balance and gait function in elderly people with dementia. Design: A randomized controlled trial. Methods: Twenty-two subjects with dementia were assigned to the TENS group (n=12) and ten subjects were assigned to the control group (n=10) randomly. Subjects were classified into two groups: the TENS group (n=12) and the placebo-TENS group (n=10). The TENS group had electrical stimulation applied on the calf muscle for 15 minutes, while the placebo-TENS group had not received real electrical stimulation. The timed up and go test (TUG) and functional reach test (FRT) were used to measure the balance function, and the 10 meters walk test (MWT) and 6MWT were used to assess gait ability. All tests were performed before and after intervention under a single-blinded condition. Results: After intervention, there were significant improvements in TUG, FRT, 10MWT, and 6MWT results in the TENS group (p<0.05), while the placebo-TENS group did not show significant changes in all outcome measurements. There were also differences in all tests between the two groups at post-measurements (p<0.05). Conclusions: This study demonstrated that a single trial TENS application on the calf may be used to improve balance and gait function in elderly people with dementia.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.315-321
• /
• 2017

This paper is a study on the design and realization of Pedestrian navigation service system for the visually impaired. As it is an user interface considering visually impaired, voice recognition functioned smartphone was used as the input tool and the Osteoacusis headset, which can vocally guide directions while recognizing the surrounding environment sound, was used as the output tool. Unlike the pre-existing pedestrian navigation smartphone apps, the developed system guides walking direction by the scale of the left and right stereo sound of the headset wearing, and the voice guidance about the forked or curved path is given several meters before according to the speed of the user, and the user is immediately warned of walking opposite direction or proceeding off the path. The system can acquire stable and reliable directional information using the motion tracker with the dynamic heading accuracy of 1.5 degrees. In order to overcome GPS position error, we proposed a robust trajectory planning algorithm for position error. Experimental results for the developed system show that the average directional angle error is 6.82 degrees (standard deviation: 5.98) in the experimental path, which can be stated that it stably navigated the user relatively.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.177-184
• /
• 1999

GDMO Agent platform based on TMN modeling operating status of network elements and resources to Managed Object as GDMO standard and controled by telecommunication management function requests of manager supporting status of resources. To supporting basic function of these GDMO agent, 13 kinds of system management function has to be implemented. Event-Report-Management function related to all system management functions. The reason that rapidly reporting has been performed as status of resources to manager by continuously communication with real resources. In this paper, a number of approach has been analyzed to communication with real resources for effective event-report management function and we proposed new real resource monitoring schemes of RRMC(Real Resource Message Coordinator) architecture for improving these resulted problem.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.1
• /
• pp.5-18
• /
• 2010

Objective : This study compares Video laryngoscope and Direct laryngoscope in tracheal Intubation on rapidity and accuracy by paramedic and aims to improve efficiency of airway management and survival rate in pre-hospital treatment for the patients with severe trauma, cardiac arrest or dyspnea caused by acute diseases. Methods : 60 paramedics were recruited from 13 fire stations located in C province. With the consent of the paramedics, likelihood ratio test was carried out and they were divided into two different groups; DL group (30) and GVL group (30). Regarding intubation conditions, difficult airway grade I, grade II and grade III as well as sniffing position and neutral position were examined. This study also compared between ambulance in motion and in stand still. Frequency, average and standard deviation were analyzed with statistics program, SPSS WIN 17.0 and repeated measure design was introduced to examine inter-relations between position, grade and groups. Results : Intubation was performed more rapidly in neutral position and GVL than in sniffing position and DL(F = 15.260, p = .000). Rapidity value was better with grade I and grade II than grade III and better with GVL than DL(F = 32.629, p = .000). Accuracy value was higher with neutral position and GVL than sniffing position and DL(F = 5.008, p = .011). grade III was less accurate than grade I, grade II and GVL was more accurate than DL(F = 10.966, p = .000). Ambulance motion status did not show any statistically significant differences in accuracy and rapidity. Conclusion : Given this study results, neutral position is better for the patient with severe trauma. For a better survival, GVL intubation can be considered since GVL can enhance accuracy as well as rapidity regarding difficult airway. Since there is no significant differences in ambulance motion factors, intubation can be recommended even in moving ambulance for shortening traveling time to a hospital.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.211-221
• /
• 2016

The increase of world's population and economic development are the keys drivers behind growing demand for energy. Especially the demand for electricity would eventually result in an increase of coal usage. Therefore ultra supercritical circulating fluidized bed boiler has been developed as solutions of economic eco-friendly technologies for coal and of increasing supplies of low grade fuels. Ultra supercritical circulating fluidized bed boiler has an once through type of steam cycle different from drum type in subcritical circulating fluidized bed boiler. Also, the duplication of a proven commercial module with 100-300 MWe subcritical circulating fluidized bed might be the key for design of 500~800 MWe ultra supercritical circulating fluidized bed boiler. After 2017, ultra supercritical circulating fluidized bed boiler might become standard model over subcritical circulating fluidized bed boiler. Therefore, this paper will help you to understand ultra super critical circulating fluidized bed (USC-CFB) through describing the background, status and prospect of the CFB technology.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.131-143
• /
• 2013

There is the difference of criteria to apply guidelines among the project participants and to depend on the purpose of utilizing BIM models, although modeling criteria are basically provided through BIM guidelines. Therefore, it is quite important to check compliance with guidelines to raise quality of the BIM model. But Quality Checking (QC) items and method for BIM model modeled in accordance with guidelines is not provided. This study suggested QC items and Rule Specifications(RS) for automatic QC. First of all, QC items were derived by analyzing domestic BIM guidelines and a process for structuring natural language is conducted by utilizing flowchart and pseudocode. So, by combining them, RS was suggested. Finally, RS-based case study was conducted by implementing automatic QC process with solibri model checker$^{TM}$. This study will contribute to the improvement of design quality and completeness of BIM model including huge data of 3 dimension. Furthermore, it is necessary to develop BIM guidelines according to the use case and to provide detailed process and standard for QC of BIM model.