• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.487-494
• /
• 2009

VOD(Video On Demand) that provides streaming service according to the user's requirement in real time, consists of the video streaming server and the client system. Since it is very hard to apply the traditional server-client model that a server communicates with many clients through 1:1 connection to VOD system because it requires very high network bandwidth, many researches have been done to address this problem. Batching technique is one of VOD system based on Multicast that requires very small network bandwidth. However, the batching based VOD system has a limitation that it is very hard to provide VCR(Video Cassette Recorder) ability. In this paper, we propose a technique that reduces the required network bandwidth to provide VCR function by using the characteristic of MPEG, one of international video compression standard. In the proposed technique, a new video stream for VCR function is constructed with I pictures that is able to be decoded independently. The new video stream for VCR function is transmitted with the video stream for normal play together in Batching manner. The performance evaluation result shows that the proposed technique not only reduces the required network bandwidth and memory usage but also decreases the CPU usages.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1658_1659
• /
• 2009

PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.

• Design & Manufacturing
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2017

Currently, a lot of efforts to make increases the manufacturing efficiency have tried and there is growing the interest to implementing the machining operation through CAM automation and optimization. This kind of movement has shown gradually in 5X milling as well as 3X milling task. By the way, in case of 5X milling, it is difficult to hire the CAM experts who is an experience for 5X machining and also it has too big trouble to use them due to high cost. For this reason, you can see the manufacturer who is concern the CAM S/W to provide the NC automation program that beginners can generate easily the 5X milling in short term and the existing 5X milling process can be improved. These requirements need to make a NC automation process including the practical machining strategies same as the generation by NC expert. In order to support this, it is necessary to directly apply the 3D machining part based on NC template which includes the machining procedures, standard cutter library, auto machine area selection, analyze tool for part shape, machining condition setting considering the material stiffness to be provided by CimatronE and it should be created the 5axis machining data by a minimized operation. With user-friendly, CimatronE's NC machining automation tools improve the 5-axis machining process and speed up the process, maximizing work efficiency and improving product productivity compared to existing machining tasks.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.6-11
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different GPNS(Gate to Primary $N^+$ Diffusion Space) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device with FPW(Full P-Well) structure and non-CPS(Counter Pocket Source) implant shows typical SCR-like characteristics with low on-resistance(Ron), low snapback holding voltage(Vh) and low thermal breakdown voltage(Vtb), which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW(Partial P-Well) structure and optimal CPS implant demonstrate the improved ESD protection performance as a function of GPNS variation. GPNS was a important parameter, which is satisfied design window of ESD protection device.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.37-43
• /
• 2015

This study examined the effects of the minimum horizontal load on the structural behaviors and safety of system supports. The minimum horizontal load was frequently ignored in the design of system supports even though the level of that load was specified in the code and guide in Korea such as 'Standard Specification in Temporary Construction' and 'Guide to Installation of Shores for a Concrete Bridge'. To examine the effects of considering the minimum horizontal load, the finite element analysis were performed for various system supports. By varying installing parameters of system supports such as the vertical member spacing, the installation height, and the thickness of slab, the maximum combined stress ratios were estimated to investigate the structural safety of system supports. The results showed similar axial stress in vertical members but an increase in bending stress with a consideration of the horizontal load. The combines stress ratios are remarkably increased due to the consideration of the horizontal load. Consequently, the system supports, which were initially estimated to be safe when only the vertical loads were considered, were changed to be unsafe in most cases by the effects of the both the vertical and horizontal stresses. Therefore, the minimum horizontal load following the code and the guide is an essential load that could control the structural safety of system supports.

• KIEAE Journal
• /
• v.3 no.2
• /
• pp.37-44
• /
• 2003

The aim of this study was to analyze the thermal performance through Test-Cell of TI-wall in domestic climate. This study was carried out as follows: 1) The TI-wall was studied for ability to reduce heat loss through the building envelope and analyzed to TIM properties. 2) Test models of TI-wall were designed through the investigation of previous paper and work, measured for winter and spring, and the thermal effects were analyzed. The type of the TIM used in test model is small-celled(diameter 4mm and thickness 50mm) capillary and cement brick(density $1500kg/m^3$) was used by thermal mass. 3) Test-cell of TI-wall was calibrated from measured data and the dynamic simulation program ESP-r 9.0. In these simulations, the measured climate conditions of TaeJon were used as outdoor conditions, and the simulation model of Test-cell was developed. 4) The sensitivity analysis is executed in various aspects with standard weather files and ESP-r 9.0, and then most suitable system of TI-wall are predicted. Finally, The suitable system of TI-wall was analysed according to sizes of air gap, kinds, thickness, and the surface absorption of therm wall. The result is following. In TI-wall, Concrete is better than cement brick, at that time the surface absorption is 95%, and the most efficient thickness is 250mm. As smaller of a air gap, as reducer of convection heat loss, it is efficient for heating energy. However, ensuring of a air gap at least more than 50mm is desirable for natural ventilation in Summer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.690-696
• /
• 2004

Advanced Television Systems Committee (ATSC) -A/90, which is a standard for terrestrial data transmission in Korea, defines synchronized data that has a strong timing association with a separate Program Element. It is classified as synchronized streaming data that is carried in packetized elementary stream (PES) packets or a synchronized non-streaming data that shall be carried in digital storage media command and control (DSM-CC) section. In this paper, we study the design and verification of synchronized streaming data processing algorithm based on ATSC -A/90. We designed a parser and a player for the algorithm development. The received PES packet including synchronized streaming data is parsed in the parser. The parsed synchronized streaming data is synchronized and displayed by player. Finally, we ascertained that STB was working properly with MPEG-2 transport stream (TS) containing synchronized streaming data, as the proposed algorithm is implemented on a set-top box.

• Journal of Technology Innovation
• /
• v.13 no.2
• /
• pp.23-43
• /
• 2005

Industrial clusters are geographical concentrations of interconnected companies, specialised suppliers, service providers, firms in related industries, and associated institutions (for example, universities, standard agencies, and trade associations) that combine to create new products and/or services in specific lines of business. At present, the concept of industrial cluster becomes very popular worldwide, policy makers at national, regional and local levels and business people in both forerunner and latecomer countries are keen to implement the cluster concept as an economic development model. Though understanding of clusters and related promoting policies varies from one place to another, the underlying benefits of clusters from collective learning and knowledge spillovers between participating actors strongly attract the attention of these people. In Thailand, a latecomer country in terms of technological catching up, the cluster concept has been used as a means to rectify weakness and fragmentation of its innovation systems. The present Thai government aspires to apply the concept to promote both high-tech manufacturing clusters, services clusters and community-based clusters at the grass-root level. This paper analyses three very different clusters in terms of technological sophistication and business objectives, i.e., hard disk drive, software and chili paste. It portrays their significant actors, the extent of interaction among them and the evolution of the clusters. Though are very dissimilar, common characteristics attributed to qualified success are found. Main driving forces of the three clusters are cluster intermediaries. Forms of these organizations are different from a government research and technology organization (RTO), an industrial association, to a self-organised community-based organization. However, they perform similar functions of stimulating information and knowledge sharing, and building trust among participating firms/individuals in the clusters. Literature in the cluster studies argues that government policies need to be cluster specific. In this case, the best way to design and implement cluster-specific policies is through working closely with intermediaries and strengthening their institutional especially in linking member firms/individuals to other actors in clusters such as universities, government R&D institutes, and financial institutions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.1 s.343
• /
• pp.79-84
• /
• 2006

This paper proposed a novel H.264 deblocking filter for low-power mobile multimedia SoCs. In H.264 deblocking filter, filtering can be skipped on some pixels when pixel value differences satisfy some specific conditions. Furthermore, whole filtering can be skipped when quantization parameter is less than 16. Based on these features, power consumption can be significantly reduced by shutting down deblocking filter partially or as a whole. The proposed deblocking filter can shut down partial or whole blocks with simple control circuits. Common hardware performs both horizontal filtering and vertical filtering. It was implemented in silicon chip using $0.35{\mu}m$ standard cell library technology. The gate count is about 20,000 gates. The maximum operation frequency is 108MHz. The maximum throughput is 30 frame/s with CCIR601 image format.

• The Journal of Information Systems
• /
• v.29 no.3
• /
• pp.237-251
• /
• 2020

Purpose The research was studied the hierarchical Hangul emotion index by organizing all the emotions which SNS users are thinking. As a preliminary study by the researcher, the English-based Plutchick (1980)'s emotional standard was reinterpreted in Korean, and a hashtag with implicit meaning on SNS was studied. To build a multidimensional emotion dictionary and classify three-dimensional emotions, an emotion seed was selected for the composition of seven emotion sets, and an emotion word dictionary was constructed by collecting SNS hashtags derived from each emotion seed. We also want to explore the priority of each Hangul emotion index. Design/methodology/approach In the process of transforming the matrix through the vector process of words constituting the sentence, weights were extracted using TF-IDF (Term Frequency Inverse Document Frequency), and the dimension reduction technique of the matrix in the emotion set was NMF (Nonnegative Matrix Factorization) algorithm. The emotional dimension was solved by using the characteristic value of the emotional word. The cosine distance algorithm was used to measure the distance between vectors by measuring the similarity of emotion words in the emotion set. Findings Customer needs analysis is a force to read changes in emotions, and Korean emotion word research is the customer's needs. In addition, the ranking of the emotion words within the emotion set will be a special criterion for reading the depth of the emotion. The sentiment index study of this research believes that by providing companies with effective information for emotional marketing, new business opportunities will be expanded and valued. In addition, if the emotion dictionary is eventually connected to the emotional DNA of the product, it will be possible to define the "emotional DNA", which is a set of emotions that the product should have.