• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1434-1441
• /
• 2007

Recently Digital Content has been to product, process and circulate fast. Also Environment and personality of user who consume digital content have been to diversify. These would be provide customized digital content to satisfy user request following specific character, environment and personality of user. In this paper, We design and implement customized content creation and consumption based on DID of MPEG-21 framework which is processing the standardization in MPEG. It filled in standard document md packaging according to the selection of the user.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1890-1896
• /
• 2008

In this paper, the Si vertical Hall devices ale fabricated by using standard bipolar process and investigated in terms of the opeating and noise properties. The sensitivity of device with P+ isolation dam(type B) has been increased up to about 1.2 times compared to that device without the dam also noise has been increased. With the condition of f=I[KHz], band-width 1[Hz], the resolution of magnetic-field detection were about $0.97[{\mu}T]$/ type B and $1.25[{\mu}T]$/ type A, respectively, thus we must consider correlation the low noise or good resolution and high sensitivity in the situation for device geometry design or even for the materials.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.19-30
• /
• 1994

The modeling of a product data is becomming more and more important in engineering environment, especially for the development of CAD/CAM system as a basis of computer integrated manufacturing system. Model is a formalized representation of the real world, and modeling is the task to identify, abstract, and formalize the product information into an unambiguous representation. In this study, the piping system, one of typical product of ship outfitting system, is modeled. The STEP idea is followed to provide a common mechanism to represent the product information throughout the life-cycle, and the object oriented paradigm is used in the analysis and design of the model. The definitions given within this model are independent of the specific application domain so that the same methodology can be used for other purpose.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.4
• /
• pp.344-351
• /
• 2017

CAD systems used in various manufacturing industries have been rapidly switched from 2D to 3D. 3D-based design is becoming common in the shipbuilding industries too. However, there is still a demand for 2D drawings for ship production. So, it is necessary to continually improve 2D drawings. One way to improve 2D drawings is to add production information to the drawings. To do this, it is necessary to define the relation between the geometry information and the production information. Various types of drawings, which is inevitable because each drawing has its own purpose, make it difficult to define relations. This process can be simplified if the drawing information is neutralized. XML is a standard format for defining neutral data, and is already being used in various fields. In this study, a neutral augmented drawing has been defined by neutralizing the drawing information based on XML, and implemented for the allocation of their information with high quality of readability as well.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.369-374
• /
• 2006

Quantification of infiltration rate is an important issue in HVAC system design. The infiltration in buildings depends on many uncertain parameters that vary with significant magnitude and hence, the results from standard deterministic simulation approach can be unreliable. The authors utilize uncertainty analysis In predicting the airflow rates. The paper presents relevant uncertain parameters such as meteorological data, building parameters (leakage areas of windows, doors, etc.), etc. Uncertainties of the aforementioned parameters are quantified based on available data from literature. Then, the Latin Hypercube Sampling (LHS) method was used for the uncertainty propagation. The LHS is one of the Monte Carlo simulation techniques that is suited for our needs. The CONTAMW was chosen to simulate infiltration phenomena in a residential apartment that is typical of residential buildings in Korea. It will be shown that the uncertainty propagating through this process is not negligible and may significantly influence the prediction of the airflow rates.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.783-788
• /
• 2021

Smart manufacturing is defined as the fully ICT-based manufacturing process which digitized, optimized, and automized the of manufacturing system in smart factory which includes product planning, design, production, quality, stock, procure. In this paper, we introduce the development of domestic standardization of smart factory and manufacturing data which are generated in operation of smart factory. We focus on general standardization of smart factory/ICT-based manufacturing system and data transactions related issues since the range of standardization is too wide. Based on these standardization review, we discuss the several concerns for utilization of manufacturing data.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.1
• /
• pp.55-70
• /
• 2019

The phase properties of ground acceleration records from Mw 5.5~6.5 earthquakes are analyzed. The interrelationships between phase properties and significant durations, as well as PGA, are clarified through both of theoretical and empirical approaches. The probabilistic characteristics of phase information is also discussed based on previous studies and it is shown that circular normal distribution is the most appropriate probability distribution for the phase angle and phase difference. Whereas those variates can be modeled by Gaussian random variables. From the survey results on the frequency dependency of the phase statistics, a simple model is introduced, which is possible to express the frequency dependency of phase information. It is also shown that the significant duration can be controlled by appropriately chosen standard deviation of phase difference for 4~8Hz frequency band and additional consideration of phase scattering in higher frequency band through a series of Monte Carlo simulations. The source of phase scattering effect is also pointed out and discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.723-730
• /
• 2018

A well-designed flight vibration specification enables the optimum weight design of the Surface-to-Air or Air-to-Air Missile, improves the maneuverability of the flight vehicle, improves the engagement of target, and increases the price competitiveness of the components and the missile system. Conventional flight vibration specifications are used by using a somewhat higher standard as suggested in MIL-STD-810C, or based on accumulated data from developed similar missile systems. In this study, we confirmed the validity of FEA response analysis by comparing response data obtained by FEA and response data of real product. Also we proposed that each specification that reflects the structural characteristics of the place where the components are mounted is required instead of verifying all the components by a single flight vibration specification.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.2
• /
• pp.131-140
• /
• 2019

Diagonally reinforced concrete coupling beams (DRCBs) have been widely adopted in reinforced concrete (RC) bearing wall systems. DRCBs are known to act as a fuse element dissipating most of seismic energies imparted to the bearing wall systems during earthquakes. Despite such importance of DRCBs, the damage estimation of such components and the corresponding consequences within the knowledge of performance based seismic design framework is not well understood. In this paper, drift-based fragility functions are developed for in-plane loaded DRCBs. Fragility functions are developed to predict the damage and to decide the repair method required for DRCBs subjected to earthquake loading. Thirty-seven experimental results are collected from seventeen published literatures for this effort. Drift-based fragility functions are developed for four damage states of DRCBs subjected to cyclic and monotonic loading associated with minor cracking, severe cracking, onset of strength loss, and significant strength loss. Damage states are defined in a consistent manner. Cumulative distribution functions are fit to the empirical data and evaluated using standard statistical methods.