• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.431-435
• /
• 2008

Quantitative information of a three dimensional(3D) kinematics of joint is very useful in knee joint surgery, understanding how knee kinematics related to joint injury, impairment, surgical treatment, and rehabilitation. In this paper, an automated 2D/3D image matching technique was developed to estimate the 3D in vivo knee kinematics using dual X-ray images. First, a 3D geometric model of the knee was reconstructed from CT scan data. The 3D in vivo position and orientation of femoral and tibial components of the knee joint could be estimated by minimizing the pixel by pixel difference between the projection images from the developed 3D model and the given X-ray images. The accuracy of the developed technique was validated by an experiment with a cubic phantom. The present 2D/3D image matching technique for the estimation of in vivo joint kinematics could be useful for pre-operative planning as well as post-operative evaluation of knee surgery.

• The Journal of Korean Physical Therapy
• /
• v.27 no.5
• /
• pp.304-310
• /
• 2015

Purpose: The purpose of this study was to examine the change in the kinematics and kinetics of the knee joint depending on high-heeled shoes during sit-to-stand (SitTS) task. Methods: Nineteen healthy females participated in this study. The subjects performed the SitTS task wearing high-heeled shoes and barefoot. The experiment was repeated three times for each task with foot conditions. The kinematics and kinetics of the knee joint were measured and analyzed using a 3D motion analysis system. Results: The result of this study showed kinematic and kinetics differences in knee joints during the SitTS task based on high-heeled shoes. Significant differences in knee flexion angle were observed during SitTS. The knee extensor force showed statistically significant differences during SitTS tasks. At the initial of SitTS, the knee flexor and extensor moment showed significant differences. The knee extensor moment showed statistically significant differences at the terminal of SitTS. At the maximum of SitTS, the knee extensor moment showed statistically significant differences. Conclusion: Therefore, wearing high-heeled shoes during SitTS movements in daily life is considered to influence knee joint kinematics and kinetics due to the HH, suggesting the possibility of increased risk of patellofemoral pain, and knee osteoarthritis caused by changes in loading of the knee joint.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1473-1474
• /
• 2008

In the total knee arthroplasty (TKA), kinematic benefic of a mobile-bearing total knee prosthesis is still arguing. Main reasons for implant failure are loosening and polyethylene wear and should be solved with new designs with mob ile bearings. The kinematics of the knee prosthesis also affects the implant failure. Recently, a second generation of p rostheses with a mobile-bearing was developed. The current study aimed to assess the kinematic path of the 2nd generation mobile knee prosthesis compared to the normal knees. Using 3D/2D registration method, CT-derived 3D knee models were fitted to sequential 2D X-ray images during knee flexion. 3D kinematics of the femur and the tibia were analyzed. The 2nd generation mobile-bearing TKA prosthesis (e.motion, Aesculap, Germany) knees showed less external rotation and knee flexion range compared to the normal knee, but the trend of external rotation was similar each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1387-1388
• /
• 2011

• Korean Journal of Applied Biomechanics
• /
• v.31 no.1
• /
• pp.64-71
• /
• 2021

Objective: This study investigated the different in isokinetic peak strength of the knee joint, and kinetics and kinematics in drop landing pattern of lower limb between the patellofemoral pain syndrome (PFPS) patients and normal. Method: 30 adult females were divided into the PFPS (age: 23.13±2.77 yrs; height: 160.97±3.79 cm, weight: 51.19±4.86 kg) and normal group (age: 22.80±2.54 yrs, height: 164.40±5.77 cm, weight: 56.14±8.16 kg), with 15 subjects in each group. To examine the knee isokinetic peak strength, kinematics and kinetics in peak vertical ground reaction force during drop landing. Results: The knee peak torque (Nm) and relative strength (%) were significantly weaker PFPS group than normal group. In addition, PFPS group had significantly greater hip flexion angle (°) than normal group. Moreover, normal group had significantly greater moment of hip abduction, hip internal rotation, and left ankle eversion than PFPS group, and PFPS group had significantly greater moment of knee internal rotation. Finally, there was significant differences between the groups at anteroposterior center of pressure. Conclusion: The PFPS patients had weakened knee strength, and which can result in an unstable landing pattern and cause of more stress in the knee joints despite to effort of reduce vertical ground reaction force.

• Advances in biomechanics and applications
• /
• v.1 no.1
• /
• pp.57-66
• /
• 2014

The purpose of the study was to investigate the kinematics between the double collar-tie and double underhook Thai Boxing clinching positions. Ten amateur mixed martial arts athletes executed six knee strikes for both clinching positions with their dominant limb directed towards a target. A standard two-dimensional video motion analysis was conducted, and the results showed a statistical significant difference at the hip joint angle and the angular acceleration of the knee and ankle. Within both clinching positions, there was a statistically significant correlation between the hip and knee joint angles, hip and knee angular velocities, and hip angular acceleration. Between both clinching positions, there was a statistically significant correlation at the knee joint angle, knee angular velocity, and hip angular acceleration. This study demonstrates the importance of the hip and knee joint movements in both clinching positions, which implies the applications of strength training and flexibility at these joints for sports performance and injury prevention. It is suggested that future studies analyzing the non-dominant leg are warranted to fully understand the Thai Boxing clinch.

• PNF and Movement
• /
• v.21 no.3
• /
• pp.337-344
• /
• 2023

Purpose: The purpose of this study was to evaluate changes in the lower extremity kinematics of subjects with dynamic knee valgus after we applied non-elastic tape while they performed overhead squat. Methods: Twenty-five subjects (12 females, 13 males) with dynamic knee valgus participated in this study. Hip and knee joint kinematics and medial knee displacement were measured during overhead squat with and without hip correction taping. Results: Hip joint internal rotation, knee valgus, and medial knee displacement were significantly lower during overhead squat with hip correction taping than without hip correction taping, but there was no significant difference in hip joint flexion and abduction. Conclusion: Hip joint correction using non-elastic taping is recommended to subjects with dynamic knee valgus to improve their lower extremity movement and alignment during overhead squat.

• The Journal of Korean Physical Therapy
• /
• v.11 no.1
• /
• pp.167-177
• /
• 1999

Biomechanics is an important scientific foundation of physical therapy and is used to relate kinematics, kinetics, statics and dynamics for comprehencing human movement. The knee is well studied for demonstrating biomechanical analyses of joint because of its simplicity. The purposes of this study were 1)to provide categories and concepts of biomechanics, 2) to apply these concepts to knee movement involving daily living and gait, and 3) to review current and preceeding researches about biomechanics of knee. Thus, physical therapiestes in clinic may be helped understand of movement which includes considerations of description and production related force, moment and power.

• The Journal of Korean Physical Therapy
• /
• v.28 no.1
• /
• pp.14-21
• /
• 2016

Purpose: The purpose of this study was to investigate examine how the kinematics and kinetics of lower limb joints were changed depending on the unstable shoes (US) during sit-to-stand task (SitTS). Methods: Nineteen healthy females were participated in this study. The subjects performed sit-to-stand task with US and barefoot. The experiment was repeated three times for each tasks with conditions. The kinematics and kinetics of lower limb joint were measured and analyzed using a 3-D motion analysis system. A paired t-test was utilised performed for to identificationy of changes in mean of angle, force, and moment between both the two conditions. Results: The results of this study showed kinematic differences in lower limb joints during SitTS based on the US. The hip, knee, and ankle angle showed statistically significant differences during SitTS. At the initial of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the terminal of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the maximum of SitTS, Tthe moment of the hip extensor showed statistically significant differences. The force and moment of the ankle flexor, extensor moment showed statistically significant differences. Conclusion: Therefore, Wwearing US is considered to influence on the lower limb joints kinematics and kinetics during SitTS movements, and thus suggests the possibility that of reducing the risks of pain, and osteoarthritis caused by changes in the loading of lower limb joints.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.728-735
• /
• 2022

Roofers get exposed to increased risk of knee musculoskeletal disorders (MSDs) at different phases of a sloped shingle installation task. As different phases are associated with different risk levels, this study explored the application of machine learning for automated classification of seven phases in a shingle installation task using knee kinematics and roof slope information. An optical motion capture system was used to collect knee kinematics data from nine subjects who mimicked shingle installation on a slope-adjustable wooden platform. Four features were used in building a phase classification model. They were three knee joint rotation angles (i.e., flexion, abduction-adduction, and internal-external rotation) of the subjects, and the roof slope at which they operated. Three ensemble machine learning algorithms (i.e., random forests, decision trees, and k-nearest neighbors) were used for training and prediction. The simulations indicate that the k-nearest neighbor classifier provided the best performance, with an overall accuracy of 92.62%, demonstrating the considerable potential of machine learning methods in detecting shingle installation phases from workers knee joint rotation and roof slope information. This knowledge, with further investigation, may facilitate knee MSD risk identification among roofers and intervention development.