• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.4
• /
• pp.44-59
• /
• 1973

• Korean Journal of Veterinary Research
• /
• v.30 no.1
• /
• pp.35-40
• /
• 1990

This study was carried out to evaluate khe accuracy of the early diagnosis of pregnancy in dairy cows using EIK-kit of progesterone in milk and to compare the progesterone concentrations in milk with those assayed by radioimmunoassay. 1. The progesterone concentrations of the pregnant cows($2.07{\pm}0.54ng/ml$) were significantly higher than those of non-pregnant cows($1.04{\pm}0.19ng/ml$), and thereafter began to inerease and maintained high levels. 2. During 20 to 22 days after artificial insemination, the accuracy of pregnancy diagnosis from EIA-kit of progesterone were 93.7% for non-pregnant cows, and 91.6% for pregnant cows. 3. During 20 to 22 days after artificial insemination, the accuracy of pregnancy diagnosis from milk progesterone concentrations were 100% for non-pregnant cows (<2.7ng/ml), and 92.9% for pregnant cows($${\geq_-}3.2ng/ml$$). The average overall accuracy of prediction for pregnant and non-pregnant cows were 96.5%. 4. Accordingly, the pregnancy diagnosis from EIA-kit of progesterone is thought to be recommendable because this early diagnostic means are simple with accurate result.

• Research in Plant Disease
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2014

A rapid, user-friendly and simple immune-chromatographic dipstick kit named 'rapid immune-gold strip' (RIGS) kit was developed in a novel single strip format to detect on-site detection of Tomato spotted wilt virus (TSWV). Immunoglobulin G (IgG) from polyclonal antisera raised in rabbits against TSWV was purified through protein-A affinity chromatography and then the purified TSWV-IgG was conjugated to colloidal gold nano-particles which served as a test line on nitrocellulose membrane. Protein A that non-specifically binds to TSWV antibody was used as a control line on the same strip. The diagnosis process with the TSWV-RIGS involves simply grinding the suspect plant sample in a bag that contains the extraction buffer and inserting the strip the bag. Results can be seen in 2-5 minutes. The flow of the complexes of gold particles coated with TSWV-IgG and a crude sap from TSWV-infected pepper, tobacco and tomato plants resulted in intensive color formed on the test lines proportional to the concentrations of TSWV. The RIGS-TSWV kit did not show any cross-reactions against other tomato-infecting viruses unrelated to TSWV. These results indicate that the TSWV-RIGS kit is highly sensitive and is not required for laboratory training and experience prior to testing. The TSWV-RIGS kit is suitable for on-site detection of suspect TSWV-infected plants as well as for laboratory diagnosis.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.406-415
• /
• 2020

This study applies Q methodology that can extract subjective opinion or recognition structure for each single household whose Meal Kit products developed and marketed by catering companies according to the demographic structure that changes socially. Implications were analyzed. As a result of subjective recognition type analysis in this study, four types were derived, and each type was named according to its specificity as follows. Type 1 (N = 6): Appearance Assessment Purchase Type, Type 2 (N = 6): Price Comparison Purchase Type, Type 3 (N = 10): Brand Trust Purchase Type, Type 4 (N = 2) : Easy Cooking Purchase Type was analyzed for each unique feature type. In this study, we analyzed the subjective opinion or recognition structure of single-person households whose Meal Kit products are the main demand groups, and suggested the direction and improvement measures for future food product development and launch for single-person households through the analysis by type. The purpose of this study is to provide academic implications based on the analysis results.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.533-538
• /
• 2009

To suggest an improved diagnostic method for Salmonella spp., analyses were conducted with immunoliposomes and compared with the results from a commercial test kit. One sample out of 36 samples of eggshell was Salmonella-positive via immunoliposomes. In the case of the use of the commercial test kit, six samples out of 36 samples were Salmonellapositive. These Salmonella-positive samples were subjected to biochemical identification tests that confirmed that they were Salmonella-negative. As for the egg content samples, they were Salmonella-negative in both analyses with immunoliposomes and the commercial test kit. The Salmonella analysis with immunoliposomes reduced detection time, by 24 h compared to the commercial test kit. Bacteria, including Acinetobacter baumanni, Chryseomonas luteola, Enterobacter cloacae, Escherichia coli, Escherichia hermannii, Klebsiella pneumonia, Pantoea spp., and Pasteurella pneumotropica, were isolated from the eggshells. Other than Acinetobacter baumanni and Pasteurella pneumotropica most of the isolates were known to frequently appear during egg production processing.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.6-11
• /
• 2018

The anodic oxidation behavior of Si-containing aluminum alloy for diecasting was investigated. Especially, the property changes during anodization both on aluminum 1050 and 9 weight percentage silicon containing aluminum (Al-9Si) alloys were analyzed by the static current test. In order to fabricate a uniform anodic oxidation film by effect of Al-Si compound, nitric acid containing hydrofluoric acid had been used as a desmutter for aluminum alloy after alkaline etching. It was found that the level of voltage of Al-9Si alloy during the static current test was almost as double as higher than aluminum 1050 through anodization. By adding hydrofluoric acid in the nitric acid electrolyte, the silicon compound on the surface was removed, and the optimum amount of added hydrofluoric acid could be derived. It was also observed that the size of silicon compound formed on the surface could be refined by heat treatment at $500^{\circ}C$ and followed water quenching.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.16-20
• /
• 2016

PURPOSE. Polymer infiltrated ceramic network (PICN) materials, also called hybrid ceramics, are new materials in dental market. The manufacturer of the PICN material VITA Enamic suggests 3 different finishing procedures for this new material. In the present study, surface roughness and color differences caused from different finishing procedures of VITA Enamic were investigated. MATERIALS AND METHODS. 120 specimens were prepared in dimensions $2{\times}10{\times}12mm$ from VITA Enamic hybrid ceramic blocks with 'high translucency' and 'translucency 2M2' shades. The specimens were divided into 8 groups. For each group, different finishing procedures suggested by the manufacturer were performed. Surface roughness values were determined by a tactile portable profilometer. Color changes were evaluated using a clinical spectrophotometer. The data were analyzed using one-way ANOVA and Tukey's post-hoc comparison. The significance level was set at ${\alpha}=0.05$. RESULTS. The roughest surfaces were observed in Glaze Groups. Their surface roughness values were similar to that of the control group. Clinical Kit and Technical Kit groups did not show a statistically significant difference regarding surface roughness (P>.05). The largest color difference regarding ${\Delta}E_{00}$ was observed in Clinical Kit finishing groups. There were also statistically significant color changes between the groups (P<.05). However, all the groups showed clinically acceptable color change (${\Delta}E_{00}$<2.25) except Clinical Kit Groups (${\Delta}E_{00}$>2.25). CONCLUSION. Within the limitations of the present study, it may be suggested that finishing the VITA Enamic restorations by Technical Kit instead of Glaze and Clinical Kit gives better clinical performance in regard to surface roughness and shade matching.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.312-318
• /
• 2012

Recently, although the need of marine robots being raised in extreme areas, the basis is very deficient. Fortunately, as the robot competition is vitalizing and the need of the robot education is increasing, it is desirable to establish the basis of the R&D and industrialization of marine robots and to train professionals through the development and diffusion of marine robot kits. However, in conventional case, there is no underwater-type autonomous marine robot kit for the marine robot competition, which has the abilities of the underwater locomotion and target detection and avoidance. To solve this problem, a marine robot kit which has the abilities of the underwater locomotion, the waterproof and the weight adjustment, is developed. To verify the performance of the developed kit, test and evaluation such as surge, pitch, yaw, obstacle avoidance is performed. The test and evaluation results show that the possibility of the real applications of the developed kit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.381-382
• /
• 2007

IZO/Ag/IZO (IAI) anode films for flexible organic light emitting diodes (OLEDs) were grown on PC (polycarbonate) substrate using DC sputter (IZO) and thermal evaporator (Ag) systems as a function of Ag thickness. To investigate electrical and optical properties of IAI stacked films, 4-point probe and UV/Vis spectrometer were used, respectively. From a IAI stacked film with 12nm-thick Ag, sheet resistance of $6.9\;{\Omega}/{\square}$ and transmittance of above 82 % at a range of 500-550 nm wavelength were obtained. In addition, structural and surface properties of IAI stacked films were analyzed by XRD (X-ray diffraction) and SEM (scanning electron microscopy), respectively. Moreover, IAI stacked films showed dramatically improved mechanical properties when subjected to bending both as a function of number of cycles to a fixed radius. Finally, OLEDs fabricated on both flexible IAI stacked anode and conventional ITO/Glass were fabricated and, J-V-L characteristics of those OLEDs were compared by Keithley 2400.

• Korean Journal of Veterinary Research
• /
• v.35 no.3
• /
• pp.583-593
• /
• 1995

The present study was conducted to develop a toxoplasma latex agglutination test antigen(Test-MT) and evaluate the toxoplasma latex agglutination(LA) test using a newly-made "Test-MT kit" by comparing with the Toxo-MT kit(Eiken chemical co, Tokyo). Also, the specifity and sensitivity test were made by comparing with IFA test and IgG-ELISA. Tachyzoite suspensions of Toxoplasma gondii(RH strain) were ultracentrifuged for 30min at $60,000{\times}g(4^{\circ}C)$ and the supernatant was used as a water-lysate antigen. Polystyrene latex particles of $1.0{\mu}m$ in diameter(Polyscience co) were used for the preparation of sensitized latex-antigen supension(Test-MT). The frequency distribution of LA titers in Test-MT showed two peaks at <1:32 and 1:128. The borderline titer for positive test in Test-MT was determined to be 1:64. But the frequency distribution of LA tites in Toxo-MT showed two peaks at <1:16 and 1:64. The positive borderline was determined to be 1:32. Agreement of reactions between Test-MT and Toxo-MT kit by LA test was shown 92.5% in bovine sera and 97.0% in swine sera, respectively. From the results obtained here it was determined that the sensitized latex-antigen, Test-MT kit, for the microtiter agglutination test prepared as same as by the procedure described in the previous paper(Suh and Lee, 1993) was useful as a highly specific, sensitive and stable immunotiteration reagent for serodiagnosis of toxoplasma infection in animal sera.