• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.4
• /
• pp.59-70
• /
• 1983

In this paper, it deals with runoff analysis in a mountainous watershed where the concentration time of the river is much Shorter than that of slopes. The momentum and continuity equation are used as the basic expressions and they are solved by the kinematic wave theory. By the introducing the distribution of concentration time, representing the characteristics of topographical and hydraulic factors, into a solution. A response function is derived. Using the optimization technique (simplex Method), the response functions derived in this paper are tested by comparing the observed and the estimated values, and shows promising.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.195-205
• /
• 2000

Many types of factors were devised to calculate time of concentration. Singh(976) derived time of concentration of overland flow using kinematic wave theory for plane, converging, and diverging geometric configurations. The present paper investigated the time of concentration for particularly plane geometric configuration. A theoretical equation of time of concentration is derived based on the assumption of impervious overland flow as in the open channel flow. The study characterized the overland flow by many types of characteristic flow such as rough turbulent flow, smooth turbulent flow, laminar flow, and then suggested a theoretical equation on each flow condition. The present paper further considered the rainfall intensity as a main factor and devised an approximate composite equation reflecting the effect of rainfall intensity given at various return periods.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.167-178
• /
• 2007

Based on the kinematic wave equations, the influence of moving rainstorms on the surface runoff were analyzed with a focus on the rainfall distribution types. Applied hypothetical rainfall distribution types of moving rainstorms used are uniform, advanced, delayed and intermediate type. The moving rainstorm velocities applied in this study were $0.125{\sim}2.0m/s$ of moving upstream and downstream direction of plane surface. Simulations were undertaken by varying the rainfall distribution type, moving rainstorm velocity and moving direction, and the results were compared with that of stationary rainfall. The results indicate significant differences in peak discharges and hydrograph shapes for moving rainstorms of various rainfall patterns and moving directions. It shows that the moving rainstorms of downstream direction generate the largest peak runoff at all rainfall distributions. The sensitivity of runoff to rainfall distribution types decreases as storm velocity increases. It is clear that faster rainstorm velocity generates faster peak time and becomes thin hydrographs rapidly.

• Water for future
• /
• v.27 no.2
• /
• pp.147-154
• /
• 1994

The occurrence condition of debris fiow due to rainfall is given by solving the equations for fiow on a slope. The solution shows that a debris fiow will occur on a slope when the accumulated rainfall within the time of concentration exceeds a certain value determined by the properties of the slope. To estimate this critical value, the system analysis technique would be commendable. In this study, a procedure to fine the critical rainfall from the rainfall data whith and without debris flows is proposed. Reliability of this method is verified by applying to the debris flows in Unzen Volcano which recently began to erupt. Discharge of debris flow in a stream is obtained by solving the equation of continuity using the kinematic wave theory and assuming the cross sectional area to be a function of discharge. The computed hydrographs agree weel with the ones observed at the rivers in Sakurajima and Unzen Volcanos. It is found from the derived equation that the runoff intensity of debris flow is in proportion to the rainfall intensity and accumulated rainfall, jointly. This gives a theoretical basis to the conventional method which has been widely used.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.71-79
• /
• 2009

In this study, a distributed rainfall-runoff model, K-DRUM, based on physical kinematic wave was developed to simulate temporal and spatial distribution of flood discharge considering grid rainfall and grid based GIS hydrological parameters. The developed model can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. Output results of ASCII format as post-process can be created to express distribution of discharge in the watershed using GIS and express discharge as animation using TecPlot. an auto calibration method for initial soil moisture conditions that have an effect on discharge in the physics based K-DRUM was additionally developed. The baseflow for Namgang Dam Watershed was analysed to review the applicability of the developed auto calibration method. The accuracy of discharge analysis for application of the method was evaluated using RMSE and NRMSE. Problems in running time and inaccuracy setting using the existing trial and error method were solved by applying an auto calibration method in setting initial soil moisture conditions of K-DRUM.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.895-906
• /
• 2005

The diversity of observed hydrologic data and the development of geographic information system leads significant progress for developing distributed runoff models in the world. One of the typical examples is TOPMODEL, but the spatial coverage of its application Is limited on small headwater basins. The purpose of this study attempts to overcome its limitation and consequently develops a semi-distributed TOPMODEL. The developed model is composed of two components: a watershed runoff component for a lumped representation of hydrologic runoff process on the catchment scale and a kinematic wave type hydraulic channel routing component lot routing the catchment outflows. The application basin is the $2,703km^2$ upper Soyang dam site and several daily and hourly events are selected for model calibrations and verifications. The model parameters are estimated on 1990 daily event. The model performance on correlation coefficient between observed and computed flows are above 0.90 for the verification events. It is concluded that the developed model in this study can be used for flood analysis in large drainage basins.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.75-82
• /
• 2010

Urban development is a cause of expansion of impervious area. A permanent storage is operated as a method of reducing runoff of watershed. The purpose of study is to propose reasonable choice of simulation model for rainfall-runoff in the prior review system on disaster effect. First, we indicated problem about concentration time choice in the flood simulation. To test the adequacy of a rainfall-runoff simulation model, We analyzed characteristics of rainfall-runoff about urban and natural watersheds. A simulation model was calibrated with the storm of july 7 to July 9 in 2009. From the result, we proposed that SWMM and kinematic wave method as the flood simulation models for urban and natural watersheds. A simulation model and design method of a permanent storage for flood that is proposed in this study will be useful for practical design of flood simulation. The hydrologic analysis method of the study can be used for capacity evaluation of permanent storage plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.431-436
• /
• 2008

Recently, the rapid development of GIS technology has made it possible to handle a various data associated with spatially hydrological parameters with their attribute information. Therefore, there has been a shift in focus from lumped runoff models to distributed runoff models, as the latter can consider temporal and spatial variations of discharge. In this research, a distributed rainfall-runoff model based on physical kinematic wave for analysis of surface and river flow was used to simulate temporal and spatial distribution of long-term discharge. The snowfall and melting process model based on Hydro-BEAM was developed, and various hydrological parameters for input data of the model was extracted from basic GIS data such as DEM, land cover and soil map. The developed model was applied for the Shonai River basin(532) in Japan, which has sufficient meteorological and hydrological data, and displayed precise runoff results to be compared to the hydrograph.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.3
• /
• pp.157-167
• /
• 2015

In order to provide simple and accurate wave theory in design of offshore structure, an analytical approximation is introduced in this paper. The solution is limited to flat bottom having a constant water depth. Water is considered as inviscid, incompressible and irrotational. The solution satisfies the continuity equation, bottom boundary condition and non-linear kinematic free surface boundary condition exactly. Error for dynamic condition is quite small. The solution is suitable in description of breaking waves. The solution is presented with closed form and dispersion relation is also presented with closed form. In the last century, there have been two main approaches to the nonlinear problems. One of these is perturbation method. Stokes wave and Cnoidal wave are based on the method. The other is numerical method. Dean's stream function theory is based on the method. In this paper, power series method was considered. The power series method can be applied to certain nonlinear differential equations (initial value problems). The series coefficients are specified by a nonlinear recurrence inherited from the differential equation. Because the non-linear wave problem is a boundary value problem, the power series method cannot be applied to the problem in general. But finite number of coefficients is necessary to describe the wave profile, truncated power series is enough. Therefore the power series method can be applied to the problem. In this case, the series coefficients are specified by a set of equations instead of recurrence. By using the set of equations, the nonlinear wave problem has been solved in this paper.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2016

The objective of this paper is to present an analytical solution in deep water waves and verify the validity of the theory (Shin, 2015). Hence this is a follow-up to Shin (2015). Instead of a variational approach, another approach was considered for a more accurate assessment in this study. The products of two coefficients were not neglected in this study. The two wave profiles from the KFSBC and DFSBC were evaluated at N discrete points on the free-surface, and the combination coefficients were determined for when the two curves pass the discrete points. Thus, the solution satisfies the differential equation (DE), bottom boundary condition (BBC), and the kinematic free surface boundary condition (KFSBC) exactly. The error in the dynamic free surface boundary condition (DFSBC) is less than 0.003%. The wave theory was simplified based on the assumption tanh $D{\approx}1$ in this paper. Unlike the perturbation method, the results are possible for steep waves and can be calculated without iteration. The result is very simple compared to the 5th Stokes' theory. Stokes' breaking-wave criterion has been checked in this study.