• Journal of the KSME
• /
• v.33 no.10
• /
• pp.871-883
• /
• 1993

차량의 승차감 및 조안 성능을 결정하는 중요한 인자인 현가장치(Supension System) 설계의 최적화를 기하며 실차육성기간을 줄이고 설계 업무의 효율성을 높이기 위하여 각종 차량 특성 인자의 수치화를 통해 여러 가지 해석을 수행하게 된다. 이러한 해석 과정으로는 크게 현가장 치의 기구학적 특성-Kinematic Analysis-과 부시 (Bush)와 스프링 (Spring) 등의 컴플라이언스 (Compliance) 효과 - 쿼지스테틱 어낼러시스 (Quasistatic Analysis)-와 전체차량의 주행 시뮬 레이션 (simulation)을 통한 설계차량의주행안정성 검토-풀 비클 어낼러시스 (Full Vehicle Analysis)- 등이 있다. 이 글에서는 승용차의 현가장치중 대표적인형인 맥퍼슨 스터러트형에 대 하여 1) 기구학적 특성, 2) 부시와 스프링 등의 컴플라이언스 효과, 3) 전체차량의 주행 시뮬레 이션을 통한 차량의 주행 안정성 검토의 순으로 각 단계별 주요 검토 항목과 인자, 그리고 실제 차량에서의 현상에 대하여 소개한다.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.713-722
• /
• 2007

Design variables for suspension systems cannot always be realized in the actual suspension systems due to tolerances in manufacturing and assembly processes. In order to deal with these tolerances, design variables associated with kinematic configuration and compliance characteristics of suspensions are treated as random variables. The reliability of a design target with respect to a design variable is defined as the probability that the design target is in the acceptable design range for all possible values of the design variable. To compute reliability, the limit state, which is the boundary between the acceptable and unacceptable design, is expressed mathematically by a limit state function with value greater than 0 for acceptable design, and less than 0 for unacceptable design. Through reliability analysis, the acceptable range of design variables that satisfy a reliability target is specified. Furthermore, through sensitivity analysis, a general procedure for optimization of the design target with respect to the design variables has been established.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.466-471
• /
• 2004

Efficient numerical finite element analysis of creeping concrete structures requires the use Kelvin or Maxwell chain model, which is most conveniently identified from a continuous retardation or relaxation spectrum, the spectrum in turn being determined from the given compliance or relaxation function. The method of doing that within the context of solidification theory for creep with aging was previously worked out by Bazant and Xi, but only for the case of a continuous retardation spectrum based on Kelvin chain. The present paper is motivated by the need to incorporate concrete creep into the recently published microplane model M4 for nonlinear triaxial behavior of concrete, including tensile fracturing and behavior under compression. In that context. the Maxwell chain is more effective than Kelvin chain. because of the kinematic constraint of the microplanes used in M4. Determination of the continuous relaxation spectrum for Maxwell chain. based on the solidification theory, is outlined and numerical examples are presented.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.269-272
• /
• 2006

The hydroforming processing is a relatively new technology in comparison with conventional stamping process. The hydroforming processing makes torsion beam in rear suspension of automobile. The durability of torsion beam is very important characteristic that operate in an automobile. In order to optimize the hydroforming process and satisfy the durability, the hydroforming simulation which could control an axial compression and high internal pressure with computer simulation has to be operated. This paper is about an optimum design to improve the kinematic and compliance characteristics of a torsion-beam of suspension system. The result from finite element analysis shows that the forming and the durability are optimized. If there is effect of First pressure in hydroforming processing that gap is in the die tool, the prototype of tube is not satisfied on the durability test.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.958-966
• /
• 2007

This study presents full vehicle dynamics model for the dynamic characteristic analysis of chassis parts which are suspension and brake system. This vehicle dynamics model is appled to kinematics and quasi-static analysis for each chassis part. In order to develop the vehicle dynamics model, the parameters of each chassis element part which are bush, spring and damper are measured by experiment. Also the wheel forces and moments of 6 DOF are measured at each wheel center. These data are applied to input parameter for vehicle dynamics model. And the verification of the developed model is achieved to comparison with the experimental force data of spring, trailing arm and assist arm by using the load response by strain gauge. These experimental force data are acquired by road test at event surfaces of P/G which are belgian and chuck holes roads.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.961-968
• /
• 2013

In this paper, we propose an optimal design for starfish capturing manipulator module with four-bar linkage mechanism. A tool link with compliance is attached on the four-bar linkage, and the tool repeats detaching starfish from the ground and putting it into the storage box. Since the tool is not rigid and the manipulator is operating underwater, the trajectory of the tool tip is determined by its dynamics as well as kinematics. We analyzed the trajectory of the manipulator tool tip by quasi-static analysis considering both kinematics and dynamics. In optimization, the lengths of each link and the tool stiffness are considered as control variables. To maximize the capturing ability, capturing stroke of the four-bar manipulator trajectory is maximized. Reaction force and reaction moment, and other kinematic constraints were considered as inequality constraints.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.409-414
• /
• 2007

Nowadays, with the advancement of computational mechanics, and vehicle dynamics simulation linked up with virtual testing laboratory(VTL) and virtual proving ground(VPG) technologies has become a useful method for analyzing numerous driving performances and diverse noise/vibration characteristics. In this paper, the analytical vehicle model based on multi-body dynamics theory was developed to investigate the vibration characteristics according to various road conditions. For the purpose, the whole vehicle parameters, each vehicle's part parameter, and part connecting elements such as spring, damper, and bush were measured by an experiment. Also, the vehicle dynamics model, which includes the front suspension, rear suspension, steering, front wheel, rear wheel, and body subsystems has been constructed for computer simulation. With the developed vehicle dynamics model, three forces and three moments measured at each wheel center were applied to evaluate and analyze dynamics and vibration characteristics for miscellaneous road conditions.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.125-132
• /
• 2020

Embedded joints in the rock mass are a major constituent influencing its mechanical behavior. Numerical analysis requires a rigorous modeling methodology for the rock mass with detailed information regarding joint properties, orientation, spacing, and persistence. This paper provides a mechanical model for a jointed rock mass based on the implicit joint-continuum approach. Stiffness tensors for rock mass are evaluated for an assemblage of intact rock separated by sets of joint planes. It is a linear summation of compliance of each joint sets and intact rock in the serial stiffness system. In the application example, kinematic analysis for a planar failure of rock slope is comparable with empirical daylight envelope and its lateral limits. Since the developed implicit joint-continuity model is formulated on a continuum basis, it will be a major tool for the numerical simulations adopting published plenteous thermal-hydro-chemical experimental results.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.76-82
• /
• 2009

Purpose: The purpose of this study was to analyze the clinical result and the gait patterns for patients who had undergone the arthroscopic posterior cruciate ligament (PCL) reconstruction using Achilles allograft. Materials and Methods: Among the patient who had undergone the arthroscopic PCL reconstruction using fresh-frozen Achilles allograft between March 2004 to March 2005, we selected 12 patients who compliance to our rehabilitation program. Clinical result and gait analysis were carried out at 36 months postoperatively. There were measured by using range of motion (ROM), Lysholm knee score, Tegner activity score, IKDC score, posterior stress test, and posterior translation measured by using Telos stress arthrometer. Kinematic gait analysis was carried out using 3-dimensional gait analysis system. Results: The PCL reconstruction surgery yielded statistacally significant results in all of clinical evaluation. In gait analysis, the average knee flexion angle increased during stance phase and decreased during the swing phase, but was not statistically significant and there were no significant difference between both sides of their knees overall. Conclusion: Since there was no statistically significant difference between the injured and uninjured sides as a result of the gait evaluation of the patients who had arthroscopic reconstruction surgery on their PCL injured knee and conformed to the rehabilitation program, systemic and strict rehabilitation ought to be important in the reconstruction surgery.