• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2220-2238
• /
• 2024

As a typical active equipment, pump machinery is widely used in nuclear power plants. Although the mechanism of pump machinery in nuclear power plants is similar to that of conventional pumps, the safety and reliability requirements of nuclear pumps are higher in complex operating environments. Once there is significant performance degradation or failure, it may cause huge security risks and economic losses. There are many pumps mechanical parameters, and it is very important to explore the correlation between multi-dimensional variables and condition. Therefore, a condition monitoring model based on Deep Denoising Autoencoder (DDAE) is constructed in this paper. This model not only ensures low false positive rate, but also realizes early abnormal monitoring and location. In order to alleviate the influence of parameter time-varying effect on the model in long-term monitoring, this paper combined equidistant sampling strategy and DDAE model to enhance the monitoring efficiency. By using the simulation data of reactor coolant pump and the actual centrifugal pump data, the monitoring and positioning capabilities of the proposed scheme under normal and abnormal conditions were verified. This paper has important reference significance for improving the intelligent operation and maintenance efficiency of nuclear power plants.

• 한국통신학회논문지
• /
• 제36권6C호
• /
• pp.368-375
• /
• 2011

분산 동영상 부호화 시스템에서는 복호기에서 Wyner-Ziv 프레임을 복원하기 위해서 부호기에서 생성된 패리티비트를 사용하게 된다. 이때 오류 정정 부호로 터보 부호나 LDPC 부호가 사용되는데 복호기에서는 원 Wyner-Ziv 프레임을 모르기 때문에 오류 정정을 위한 효과적인 상관 잡음 모델링이 필요하다. 본 논문에서는 복호기에서 Wyner-Ziv 프레임과 부가정보 간의 상관 잡음을 효과적으로 모델링하기 위한 방법을 제안하고 추정한 상관 잡음 모델이 분산 동영상 부호화 시스템에 미치는 영향을 분석한다. 또한 모의실험을 위해 H.264 intraframe 부호화 방법으로 부호화된 키 프레임을 사용하였는데 부호기에서 동적으로 키 프레임 양자화 파라미터 값을 추정하기 위한 방법을 제안하고 성능을 해석한다.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.253-257
• /
• 2010

The frequency is an important operation parameter for the control, protection, and stability of a power system. The frequency as a key index of power quality can be indicative of system abnormal conditions and disturbances. Due to the sudden change in generation and loads or faults in power system, the frequency is supposed to deviate from its nominal value. It is essential that the frequency must be maintained very close to its nominal frequency. An accurate monitoring of the power frequency is essential to optimal operation and prevention for wide area blackout. As most conventional frequency estimation schemes are based on DFT filter, it has been pointed out that the gain error could cause defects when the frequency is deviated from nominal value. This paper presents an advanced frequency estimation technique using gain compensation to improve the performance of DFT filter based techniques. To evaluate performance of the proposed algorithm, the 765kV T/L system in Korea is simulated by EMTP-RV software. The proposed technique can reduce the gain error caused when the power system frequency deviates from nominal value.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.63-75
• /
• 2012

For the definition of development project, this paper proposes an integrated design model for the project 3P's(Products, Process, and People) architecture solutions balancing the originating requirements as well as the design targets of product, process, and IPDT. The model is suggested to develop the integrated design method with trade-off analysis and alternatives evaluation of products, processes, and IPDT using QFD.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.76-81
• /
• 2009

Thermal desorption systems are designed to remove organic compounds from solid matrices such as soils, sludges and filter cakes without thermally destroying them. It is a separation technology, not a destruction technology. Since it is a thermal process, there is a common belief that temperature is the only significant parameter to be monitored. While it is true that better removal efficiencies are usually achieved at higher temperatures, other factors must be considered. Since the process is governed by mass transfer, heating time and the amount of mixing are also key parameters in optimizing removal efficiency. Thermal desorption have been successfully used for just about every organic contaminant found to date. It has also been used to remove mercury. In the present study, the numerical simulation has been performed to investigate the characteristics of heat transfer of LTTD(low temperature thermal desorption). The commercial software, AMESIM was applied for analyzing the heat transfer process in the LTTD.

• 항공우주기술
• /
• 제2권2호
• /
• pp.115-123
• /
• 2003

본 논문에서는, KSR-III 김발엔진 구동장치 시스템의 원활한 작동을 보장하기 위한 방안으로 릴리프밸브의 적용을 고려하였다. 비행 중의 김발엔진 지지구조물에서의 진동 및 급격한 외란 등에 의해 구동기에 과도한 토크가 작용하는 경우, 구동기의 작동불능 및 로켓의 성능저하가 발생 가능함을 보였으며, 릴리프밸브의 적용을 통해 그러한 불안정성을 해소시킬 수 있음 을 보였다. 6자유도 시뮬레이션 분석을 통해, 릴리프밸브의 작동압이 낮을수록, LOHM 파라미터가 작을수록 시스템의 성능 면에서 유리하다는 결과를 제시하였으며, 릴리프밸브를 채용함에 따라 로켓에 작용하는 TWD 등의 외란을 감소시키는 효과도 발생함을 보일 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.946-949
• /
• 2006

This study is a trial to make a design chart of sound insulation for multiple panel. Dilatational frequency, ${\Large f}_d$ becomes a key factor for optimal design since it acts like a turning point in sound insulation performance of such panels. Hence, in tuning the ${\Large f}_d$ optimally, elastic modulus of core material and thickness of the skin panel is designated to parameters. Based on these parameter, a design chart of sound insulation for multiple panel is made. Its applicability is proved by the case study of High noise reduction panel.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.47-48
• /
• 2017

This paper presents a low-cost portable lithium battery parameter measuring and estimating the solution. In this method, lithium battery characteristics are monitored during discharging and charging cycles. The battery profile is analyzed, and its key parameters are estimated by GNU Octave running on Raspberry Pi Zero, a mini computer. The proposed method can measure and estimate the battery parameters for SOC and DOD estimation with reasonable accuracy as well as portability features.

• Communications for Statistical Applications and Methods
• /
• 제23권1호
• /
• pp.47-55
• /
• 2016

Stratified cluster sampling has been widely used for effective parameter estimations due to reductions in time and cost. The probability proportional to size (PPS) sampling method is used when the number of cluster element are significantly different. However, simple random sampling (SRS) is commonly used for simplicity if the number of cluster elements are almost the same. Also it is known that the ratio estimator produces a good performance when the total number of population elements is known. However, the two stage cluster estimator should be used if the total number of elements in population is neither known nor accurate. In this study we suggest a composite estimator by combining the ratio estimator and the two stage cluster estimator to obtain a better estimate under a certain population circumstance. Simulation studies are conducted to compare the superiority of the suggested estimator with two other estimators.

• Journal of electromagnetic engineering and science
• /
• 제7권3호
• /
• pp.116-121
• /
• 2007

Novel design of a wideband monopole antenna for DVB-H service is presented. The proposed antenna is designed based on a monopole antenna. It consists of folded monopole and parallel parasitic element. The folded segment of the folded monopole makes the antenna shorter. The length of the parasitic element obtains additional resonance frequencies. The gap distance between the folded monopole and the parasitic element is a key parameter to control impedance matching for wideband operation. The antenna has wide band performance, good impedance and radiation characteristics from 470 MHz to 870 MHz. The measured return loss for operating frequencies over DVB-H band is better than 10 dB. Good radiation patterns are also obtained. The measured results are compared with calculated results using Ansoft HFSS(High Frequency Structure Simulator).