• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.68-76
• /
• 2007

The purpose of this study is to investigate change of mechanical and physical properties, shape behavior and hand value in weft knit when rib stitch and milan stitch are combined. The knit stitches used in this study are plain stitch, half milan rib stitch, milan rib stitch, $2{\times}1$ rib stitch, $2{\times}1$ half milan rib stitch and $2{\times}1$ milan rib stitch. We analyzed physical and mechanical properties(tensile, bending, shear, compression, surface properties, thickness and weight) of the knit stitches and calculated their primary hand value and total hand value through translational formulas using the KES(Kawabata Evaluation System). The results are as follows; In evaluation of mechanical properties and hand values of knit stitches, plain stitch had the highest flexibility and the lowest T.H.V. as women's winter knit wear. Since $2{\times}1$ rib stitch had too high elongation in one direction, although it had the highest T.H.V, it needs to be careful when plain stitch and $2{\times}1$ rib stitch are applied for women's winter knit wear. Since Milan rib stitch and $2{\times}1$ milan rib stitch had high T.H.V. similarly, it is considered that they are suitable for women's winter knit wear. Specially, when Milan stitch is combined with $2{\times}1$ rib stitch, its shape stability and fullness are contained and flexibility is added on it. Therefore, $2{\times}1$ milan rib stitch can be also applied for women's winter knit wear.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.226-228
• /
• 1998

The objective of this study was to observe the effects of potassium-cyanoethylstarch (K-CES), which is a natural polymer derivate,. and polyacrylamide (PAM), which is a synthetic polymer, on the growth of spinach under environment-controlled biotron. K-CES was made from tapioca starch, and introductions of acrylonitrile was confirmed by FT-IR. Water absorbing capacities (WAC) of K-CES and PAM were 37.6 and 47.8 times, respectively. WAC of PAM was slightly higher than K-CES, WAC of PAM m saline solutions were more reduced than those of K-CES. It was introduced that K-CES treatment was more effective than PAM in higher salinity of water and soil. Dry super absorptive polymers were put into solution, and the solution was applied to soil as an soil conditioner. Both amendments, K-CES and PAM, increased the vegetative growth of the spinach when applied at 0.1% of soil weight. In general, the most favorable results for early vegetative growth of the spinach came from the PAM treatment, followed by the K-CES treatment.

• Journal of Fashion Business
• /
• v.14 no.6
• /
• pp.39-52
• /
• 2010

Interests in creating three-dimensionally designed fabric materials are growing rapidly in the sectors of the fashionable textiles with the creativity, new functions, and aesthetics. A number of finishing methods have been developed and proposed to add or create new functions and designs for silk fabrics. Due to the strong hydrogen bonds between the molecules of silk fibroins, the thermal treatment methods used in thermoplastic fiber processing, which can easily deform the synthetic filament fabrics to endow three-dimensional appearance to the fabrics, are not applicable to the silk fabric treatment. In order to modify the fine structure of silk fiber, neutral salt solution treatment methods have been suggested. In this study, the effect of the calcium nitrate solution on the physical and mechanical properties of silk fabrics was investigated by using the KES(Kawabata Evaluation System) equipment. Based on these findings, relationships between parameters, for example, the thickness and the compressional energy, the thickness and the compressional linearity, and the air permeability and the pore area statistical analysis were investigated. The relationships between the process parameters such as treatment temperature/time and the resulting fabric property parameters were also analyzed by using several SAS procedures.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.208-213
• /
• 2011

We calculated the EPR (electron paramagnetic resonance) line-shape function. The line-widths of a -doped single crystal was studied as a function of the temperature with 0.5 and 2 at. at a frequency of (X-band). The line-width decreases with increasing temperature, such temperature behavior of the line-width can indicate a motional narrowing of the spectrum, when impurity ions substitute for host ions in an off-center position, and thus there can be fast jumping of dipoles between several symmetrically equivalent configurations. Therefore, the present technique is considered to be more convenient to explain the resonant system as in the case of other optical transition problems.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.667-673
• /
• 2021

The purpose of this study was to obtain drape information and objective texture of fabrics easily and quickly by using a constructed fabric database. For the construction of the fabric database, 287 woven fabrics were examined by using the CLO fabric kit, KES-FB system, and drape test system. The k-means cluster analysis method was used to classify the fabrics into 7 grades. After correlation analysis of the fabric properties for each experiment, similar properties of the CLO fabric kit and KES-FB system were chosen, which were then designed to extract similar fabrics from the database. It was confirmed that inferring the drape information and objective hand feeling of fabrics was to some extent possible by extracting similar fabrics from the database. In this study, the primary hand and total hand value(THV) of KES-FB system, which was constructed by Kawabata and other experiments, were used to quantify the objective hand feeling, because they are the most widely used. However, these standards can be changed over time; in order to be applied within the clothing industry, these standards may have to be changed to some extent. Moreover, it is notable that although objective hand feeling cannot be expressed in the 3D virtual costume program, it can be easily derived from the constructed database. Additionally, it is expected that the existing 3D virtual costume program will express the costumes more realistically by improving these results.

• Science of Emotion and Sensibility
• /
• v.9 no.1
• /
• pp.39-48
• /
• 2006

This study was carried out to investigate sound sensation of Korean traditional silk fabrics with similar sound pressure levels (SPL) and to identify secondary physical factors excluding SPL which determine sound sensation of the fabrics. Sounds of the silk fabrics tended to be perceived differently from one another as for some of sensation such as clearness ant roughness. They were felt more strongly in aspects of loudness, roughness, and highness than of softness, sharpness, clearness, and pleasantness. Subjective clearness, roughness, and highness were significantly correlated with some of sound parameters including roughness(z), ${\Delta}L,\;and\;{\Delta}f$. Especially, both of clearness and roughness which were varied among the fabrics were found as determined by ${\Delta}L$. This result means that ${\Delta}L$ as well as roughness(z) and ${\Delta}f$ could be utilized secondary to SPL in order to satisfy some of human sensibility for sound from traditional silk fabrics without variation of physical loudness.

• Science of Emotion and Sensibility
• /
• v.8 no.4
• /
• pp.393-402
• /
• 2005

Subjective touch sensation for Korean traditional silk fabrics was evaluated, in order to compare tactile sensory aspects of Korean and American subjects and to determine mechanical properties of the fabrics affecting the sensation psychophysically. Eight aspects of touch sensation including hardness, smoothness, coarseness, coolness, pliability, crispness, heaviness, and thickness were rated by semantic deferential scale. The mechanical properties of fabrics were measured by Kawabata Evaluation System (KES). Both of Koreans and Americans showed fairly similarities to each other in subjective smoothness, coarseness, and crispness. On the contrary, as for coolness and pliability, Koreans were found as feeling the silk fabrics more sensitively than Americans were in that they rated some of modified leno fabrics as very cool and stiff in touch. Coolness and pliability by Koreans were affected mainly by surface and bending properties while those by Americans were determined mostly by compressional and tensile characteristics as well as sulfate properties

• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.77-86
• /
• 2009

A comfort evaluation of car seat clothing has been proposed for high comforts interior seat clothing. Car seat covers have received wide spread attention due to their man-machine interface working. And then, it will be necessary for measurements on delicate basic mechanical-properties, which closely relate with human touch feeling of its materials. In this research, we have utilized $KES-FB^{(R)}$(Kawabata Evaluation System) series, $^ST300{(R)}$ analogue softness tester and friction tester for measurement a physical properties. In order to consider both kansei and physical properties on interior seat covers, we firstly have established subjective words of judgement for the seat covers. Secondly, related them to the objective measurement of physical properties. Each kansei-language has clearly defined as 'Softness', 'Elasticity', 'Volume' and 'Stickiness' for the adjectives of leather car seat covers. These technical terms have correlated to physical properties in other words, h (mm), bending moment ($gf^*$cm/cm), To-Tm (mm) and ${\mu}$. At this time, fuzzy logic has utilized to predict the value of kansei language through physical values. On the basis of this result, finally it is possible to predict quality index of car seat covers using neural networks technique. In short, we develop a quality evaluation system of car seat clothing combining four physical quantities with kansei engineering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.291-306
• /
• 1984

The possibility of formation of carcinogenic N-nitrosamines such as nitrosodimethylamine(NDMA), nitrosodiethylamine (NDEA) and nitrosopyrolidine (NPYR) during the fermentation of Kimchi was investigated. Three different types of Kimchi, formulated with chinese cabbage, red pepper powder and garlic, with or without one of both fermented shrimp and anchovy juice, were cured for 75 days at $5^{\circ}C$. The changes in contents of nitrates, nitrites, pH, ascorbic acid, secondary amines, trimethyl-aminoxide (TMAO), trimethylamine (TMA) and NDMA were analyzed periodically during the fermentation. TMAO, TMA. DMA, nitrate, nitrite and ascorbic acid were analyzed by colorimetric methods, and NDMA, NPYR and NDEA were determined by the method of GLC-TEA. Although the total secondary amines markedly increased, no significant changes in the levels of TMAO and TMA were observed during the fermentation Kimchi added with fermented shrimp or anchovy juice. The predominating component of secondary amines was confirmed to be dimethylamine by means of nitrosating technique coupled with gas chromatography. No appreciable increase in the level of nitrites was appeared although nitrate level in the Kimchi apparently decreased. Non detectable or trace level of nitrosamine formation was detected whereas the nitrates fairly decreased during the fermentation of Kimchi. This could be explained by the fact that the lack of nitrites was resulted in the system due to rapid consumption of nitrites formed from nitrates by the reactions with ascorbic acid and amino acids which have been known as inhibitors of nitrosation reaction.