• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1188-1195
• /
• 1999

This study was conducted to determin basic mineral compositions, chemical components, description of particle size distribution and whiteness for 32 items of insoluble mineral substances, i.e., 3 items of diatomaceus earth, 1 item of kaolin, 10 items of bentonite, 13 items of acid clay, 3 items of talc and 2 items of perlite. The chemical components and XRD (X-Ray diffractometer) for insoluble mineral substances, were similar with those of the reported references except kaolin. However, whiteness was determined in 90% level for talc, diatomaceus earth and kaolin. The contents of heavy metals in insoluble mineral substances were determined as follows : Pb, $nd{\sim}23.10$ ppm ; Cd, $nd{\sim}0.67$ ppm ; Hg, $nd{\sim}0.58$ ppm ; As, $nd{\sim}1.42$ ppm ; Cu, $nd{\sim}39.35$ ppm. These data were significanty lower than the references.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2021

Asian dust (Hwangsa) deposited on the surface of the Korean Peninsula is difficult to recognize their existence in mountainous terrain undergoing active erosion and weathering. This study examined Asian dust sediments mixed in soils by analysing clay mineralogy, mineral composition, and microtextures of fine silt (< 20 ㎛) in the alkali feldspar granite area of Seoraksan. The fine silt was composed of detrital particles derived from bedrocks, Asian dust sediments, and their weathering products. Clay minerals of 2:1 structural type, chlorite, amphibole, epidote, and Ca-bearing plagioclase were identified as eolian mineral particles. During the weathering of the bedrock composed of quartz and alkali feldspars, albite was partially weathered to produce small amounts of gibbsite and kaolin minerals. Hydroxy-Al interlayered clay minerals were formed by the exchange and fixation of polynuclear Al cationic species into the interlayers of expandable 2:1 clay minerals dominated by illite-smectite series clay minerals. Contribution of Asian dust to the fine silt of soils was estimated around 70% on the basis of total contents of 2:1 phyllosilicates.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.273-280
• /
• 2003

This paper describes a study of the effect of shield tunnel construction on the liners of nearby existing perpendicular tunnels. The research programme investigated the influence of tunnel proximity and alignment, liner stiffness on the nature of the interactions between closely spaced tunnels in clay. A total of two sets of carefully controlled 1g physical model tests, including the same test for repeatability, were performed. A cylindrical test tank was developed and used to produce clay samples of Speswhite kaolin. In each of the tests, three model tunnels were installed in order to conduct two interaction experiments in one clay sample. The tunnel liners were installed using a model tunnelling machine that was designed and developed to simulate the construction of a full scale shield tunnel. The first tunnel liner was instrumented to investigate its behaviour due to the installation of each of the new tunnels. The interaction mechanisms observed from the physical model tests are discussed and interpreted.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.777-782
• /
• 1995

The scale up production test for the hydrothermal synthesis of clay mineral from the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated by using the gaitator type reactor. The automatic control system has been developed and applied for the more effective producibility and the reduction in the defect of this intermittent batch processing property, and finally for the feasibility of this system in actual use. It was observed that this agitator type reactor can reduce the synthesis reaction tme from 5 days to 3 days, only with the condition of 20rpm. The automatic control system could regulate the vessel temperature and pressure precisely at an optimum condition during the treatment. Therefore, from these test results the application-possibility for this system was found to be feasible in actual use.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.219-222
• /
• 2000

The purpose of this research was to investigate the general properties and main ingridients of Hwangtoh, which is the Korean loess. It is well known as a raw material of pottery shown to be widely scattered on the earth, especially in Korea. It belongs to primary clay that was found to be rich on mountain surface or field. In this study, XRF Spectral method was employed to analyze the chief ingredients of Hwangtoh, being found to consist of $43{\sim}50%\;SiO_2,\;2{\sim}34%\;Al_2O_3,\;2{\sim}3%\;Mg,\;2{\sim}3%\;Na\;and\;1{\sim}2%\;K$. The ferric oxide contents of Hwangtoh from San Chung, Ha Dong, Ko Ryung, Ouk Chong, Bang Gae and Song Kwang were 6.46, 7.96, 11.26, 9.36, 9.06 and 9.28 %, respectively. The general characteristics of Hwangtoh from different places were studied by determining the content of water and the capacity to maintain temperature. Based on the above results, Hwangtoh could be said to have better quality than primary clay of Kaolin dose, and also would be able to find an application in construction formulations.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.141-150
• /
• 2006

To develop the microbial agents for the environmentally-friendly treatment and recycling of food waste, useful microorganisms, which showed higher degradation activities to various organic compounds and possessed flocculating activities, were isolated from the earthworm. One of the isolated strains, named JS-01, was further selected due to its higher flocculating activity against 0.5% Kaolin clay. JS-01 was identified as Bacillus pumilus sp. by 16s rDNA analysis. The optimal temperature and pH for the growth of JS-01 to express the flocculating activity was found to be at $37^{\circ}C$ in pH 7.0 of EPS broth medium. JS-01 also expressed good degrading activity against cellulose, which is one of the representative organic materials in food waste. We propose that JS-01 will be a good candidate for the efficient treatment of food waste and leachate due to the property to degrade cellulose and flocculating activity.

• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.41-47
• /
• 2000

This study was conducted to evaluate development of seed pellet technique such as pellet polymer search, the shape formation and hardness, the germination and emergence rate of the pellet seeds for labor-saving and reducing production cost in onion(Allium cepa L.) cultivation. The pellet seeds shape formation was good such as kaolin, clay, ash, and gypsum, and clay was good shape formation but surface of pellet seed was cracked during the drying. PG(pearlite + gypsum) as pellet material and PVA as binder were the best among the material in consideration with shape and hardness together. The hardness of the pellet seeds was affected by polymers, the kinds and concentration of binders, and that degree was large at polymer. The high hardness polymers were gypsum and coal ash, but burned lime was the lowest hardness among the pellet material. The germination(GP) and emergence percentage(EP) of pellet seed with PG in vitro were the highest among the material, and that was 93.6, 91.8%, respectively. The EP of pellet seed with PG at 20, $25^{\circ}C$ were 91.3, 92.0%, respectively, The EP of pellet seed were over the 91%, and those did not show difference with field moisture capacity , and that of 5 and 6mm size seed were the highest as 92%, respectively. and other size seeds showed over 90%, too. The EP of pellet seed with PG was decreasing as increasing the sowing depth, and that of at 10mm sowing depth was the highest as 92.7%. The time to 50% emergence of that under 70% field moisture capacity was 158h, and that was delayed at 20h compare to control seed.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.301-312
• /
• 2005

The present study investigated the physical changes and reaction products with setting time after mixing of various mineral admixtures such as lime, hydrated lime, gypsum, kaolin, zeolite and diatomaceous earth with four types of cement (portland cement, slag cement, quick lime, hydrated lime) and clay rich sediments in soft foundation. As results, slag cement showed the greater compressive strength than normal portland cement. The mixing experiments with various mineral admixtures and slag cement resulted that gypsum showed the greatest compressive strength. Additionally, we conducted mixing experiments with various mixing ratios of gypsum and slag cement. The experiments showed that the mixing ratio of $30\%$ gypum and $70\%$ slag cement has the greatest compressive strength. Ettringite was produced as a reaction Product. This fact indicates that gypsum effectively promotes hydration reaction and contributed to the greater compressive strength. These experimental results can be used as fundamental data for the stabilization of soft clay foundation.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.33-43
• /
• 2002

Mineral composition and chemical properties of Hwangto (reddish residual soil) that used in feeding of cattles at Iksan, Jeollabuk-do, Korea were examined according to particle size separation such as gravel, sand, silt, coarse clay and fine clay. Mineral composition analyses reveal that gravel and sand are mainly composed of quartz and feldspars and that kaolin mineral and illite are dominant in clay and silt. Iron oxides are mainly included in fine clay. According to chemical analyses of major elements, Al, Fe and $H_2O$ contents are increased with decreasing of particle size. This trend well agrees with increase of clay minerals in smaller particles, Chemical analyses of trace elements indicate that contents of Zn, Rb, Sr, Ba, Pb significantly differ with particle sizes. Ba and Sr are included in feldspars since these elements are abundant in sand containing abundant feldspars. Pb and Sm are abundant in sample before particle size separation, but the contents are significantly decreased after separation. Therefore, most of these elements appear to be existed as removable phase. Nb, La, Th, Ce are more abundant in silt. The contents of all the other trace elements tend to be increased in smaller particles containing more clay minerals. The contents of changeable cations and teachable elements in acid and alkali solutions are high in clay samples. All the above results indicate that using the portion of smaller particle of Hwangto for livestock feed rather than bulk Hwangto can improve cation exchangeable capacity, ion leaching capacity and sorption properties.

• Journal of the Korean Ceramic Society
• /
• v.21 no.4
• /
• pp.366-372
• /
• 1984

Unstabilized Zirconia was added to basic composition under 44$mu extrm{m}$ of 57.80wt% Clay-22.20wt% Chamotte-20.00wt% Agalmatolite system. Here the amount and the particle size of Zirconia were 5-25wt% and -20${\mu}{\textrm}{m}$ respectively and the body of these composition was first at 135$0^{\circ}C$. The results obtained from examining the properties of sintered body were as follows. 1. Firing linear shrinkage apparent density and bulk density apparent porosity and water absorption of the samples had the tend to increase according as the particle size of zirconia became larger and the amount of zirconia increased. 2. Modulus of rupture was inversely proportional to the particle size and the additive amount of zirconia, . Especially in case that the particle size of zirconia over 5${\mu}{\textrm}{m}$ and the additive amount of zirconia was 25wt% the modulus of rupture had shrunk drastically. 3. The maximum value of KIC was obtained at 20wt% additive amount of zirconia according to the each particle size of zirconia. Especially the highest value of KIC is 2, 173 M. Pa. M1/2 when the particle size of zirconia is 5~10${\mu}{\textrm}{m}$ and the additive amount is 20wt%.