• 제목/요약/키워드: KRISS

검색결과 590건 처리시간 0.026초

Measurement Uncertainties for Vacuum Standards from a Low to an Ultra-high Vacuum

  • Hong, S.S.;Shin, Y.H.;Lim, J.Y.
    • Applied Science and Convergence Technology
    • /
    • 제23권3호
    • /
    • pp.103-112
    • /
    • 2014
  • The Korea Research Institute of Standards and Science (KRISS) has three major vacuum systems: an ultrasonic interferometer manometer (UIM; Section II, Figs. 1 and 2) for a low vacuum, a static expansion system (SES; Section III, Figs. 3 and 4) for a medium vacuum, and an orifice-type dynamic expansion system (DES, Section IV, Figs. 5 and 6) for high and ultra-high vacuum systems. For each system, explicit measurement model equations with multiple variables are given. According to ISO standards, all of these system variable errors were used to calculate the expanded uncertainty (U). For each system, the expanded uncertainties (k = 1, confidence level = 95%) and relative expanded uncertainty (expanded uncertainty/generated pressure) levels are summarized in Table 4. Within the uncertainty limits, our bilateral and key comparisons [CCM.P-K4 (10 Pa to 1 kPa)] are extensive and in good agreement with those of other nations (Fig. 8 and Table 5).

전류변성기의 비오차와 위상각오차의 계산값과 실험값의 차에 의한 측정시스템 유용성 검증기술에 관한 연구 (A Study on Usefulness Verification Technique of the Measurement System by the Difference Between Caculated and Experimental Values of Ratio Error/phase Annie Error in Current Transformer)

  • 정재갑;권성원;이상화;박영태
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권4호
    • /
    • pp.213-217
    • /
    • 2004
  • A current transformer(CT) used for the estabilishment of high current national standard, has generally very small ratio error and phase angle error. Both the errors of CT depend critically on the external burden used. When both the ratio and phase angle errors at two different burdens including zero burden are known, those at any other burdens are calculated theoretically. The theoretical values are well consistent with the experimental results within the $82{\times}10$-6, implying the measurement system of CT in KRISS is well maintained.

GNSS 이용 시각비교 통합 모니터링

  • 김준환;양성훈;이영규;이승우;이창복;김기두
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.482-485
    • /
    • 2006
  • 다채널 시각비교 수신기(R100-40T, Euro-80)를 이용한 GPS C/A 코드 시각비교 데이터와 Ashtech Z12T 수신기를 이용한 P3 코드 시각비교 데이터를 통합 모니터링함으로서, 간편하게 시각비교 결과를 확인 할 수 있게 GUI(Graphic User Interface) 환경으로 구현하였다. 수신기들은 현재 KRISS(Korea Research Institute of Standards and Science)에서 사용 중인 위성이용 시각비교 수신기들이다. 본 시각비교 통합 모니터링 프로세스를 통해서 GPS C/A code 시각비교 데이터와 P3 code 시각비교 데이터 각각을 비교 분석함으로써 시각비교 결과의 신뢰성을 검증하는데 사용한다.

  • PDF

야외 시험장에서 표준안테나법에 의한 안테나인자 교정 (Antenna Factor Calibration by Standard Antenna Method at Open Area Test Site)

  • 신진국;김정환;박정일
    • 한국통신학회논문지
    • /
    • 제24권8B호
    • /
    • pp.1456-1463
    • /
    • 1999
  • 본 논문은 한국표준과학연구원의 야외시험장에서 표준안테나법을 이용하여 안테나인자측정 시스템에 관하여 기술하고 주변 잡음이 안테나인자에 미치는 영향을 줄이기 위한 방법에 대해 논한다. 측정주파수의 범위는 30~1000 MHz이며, 모든 제어와 데이터 수집은 컴퓨터를 이용하여 자동화 하였다. 측정한 안테나인자를 나타내었고, 안테나인자의 총 측정불확도는 $\pm$1 dB 이다.

  • PDF

직류 저주파 분야 인터넷 원격교정시스템의 개발과 활용 (Development and Application of Internet Remote Calibration System in the field of DC and LF)

  • 정재갑;김규태;박승남;송양섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 D
    • /
    • pp.2020-2021
    • /
    • 2003
  • Korea Research Institute of Standards and Science (KRISS) has developed a Web-based, remote, Internet calibration system to calibrate the Fluke 5700A/5720A calibrator using a transportable standard: specifically, multifunction transfer standard 4950. Although the uncertainty for the Internet calibration is up to two times larger than that using conventional manual calibration, it has many advantages: no need to transport the customer equipment, a reduction in the calibration service time, a directly enforced traceability to the national standards, convenience, and ease of use for the customers.

  • PDF

시간고조파를 고려한 선형유도전동기의 등가회로와 특성해석 (Equivalent Circuit and Characteristics Analysis of LIM Considering the Time Harmonics)

  • 장석명;이현구;박영태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 추계학술대회 논문집 학회본부
    • /
    • pp.305-307
    • /
    • 1996
  • Because most LIM is driven by inverter, input voltage is involved with the time harmonics. Therefore the equiLlQ/ent circuit for an inverter-fed LIM has to be modified to represent every harmonics present in supply voltage. This paper analyzes the characteristics and loss of LIM to construct the equivalent circuit for each time harmonics through the static test and theoretical analysis. To make an analysis of nonsinusoidal supply waveforms, it is developed the simulation program to calculate the RMS, peak value and THD for any waveforms expressing Fourier series.

  • PDF

광기술을 이용한 연구보고서 관리시스템 구축 (A Study on Construction of Technical Reports Management System Using Optical Technology)

  • 이상헌;김익철
    • 정보관리학회지
    • /
    • 제9권1호
    • /
    • pp.131-164
    • /
    • 1992
  • 본 연구에서는 광기술을 이용한 보고서 서지정보와 원문정보를 관리할 수 있는 보고서관리시스템을 개발하였다. 시스템을 현재 상업적으로 보급되고 있는 문서용 광화일링시스템과의 비교평가를 통하여 보고서관리에 적합하고, 도서관 업무에 효율화에 직접적으로 기여할 수 있는 구조로 설계되었으며, 디지탈 이미지 처리기술, MARC 표준, 영문 OCR등의 기술이 사용되었다. (키워드 : 디지탈 이미지, 광기술, 전문데이타베이스, 표준화, 기술보고서, MARC, 광학문자인식)

  • PDF

과실 비파괴평가용 초음파 변환기 개발 (Development of Ultrasonic Transducer for Nondestructive Evaluation of Whole Fruit)

  • 김기복;이상대;김만수
    • Journal of Biosystems Engineering
    • /
    • 제32권4호
    • /
    • pp.269-275
    • /
    • 2007
  • In this study, ultrasonic transducers for non-destructive contact measurement of whole fruits were developed. The design parameters for ultrasonic transducer such as acoustical impedance of fruits, kinds of piezoelectric materials, ultrasonic wave frequency, and transducer diameter were investigated. In order to match the acoustical impedance between piezoelectric material and fruit, various materials were fabricated and evaluated. Also to control the sensitivity and bandwidth of the ultrasonic transducer, various backing materials were fabricated and evaluated. Especially, the wear plate of the ultrasonic transducer was designed and fabricated considering the curvature of fruit. The central frequencies of two developed ultrasonic transducers were about 100 kHz and 200 kHz, respectively. With the developed ultrasonic transducers, non-destructive evaluation of the fruit will be possible.

R&D 사업의 경제적 파급효과 측정 - 산업측정 신뢰도 제고사업을 중심으로 - (Evaluating the economic impact of R&D investments - Improvement of measurement reliability -)

  • 최승일;김진호;조문재;황인극
    • 한국산학기술학회논문지
    • /
    • 제8권4호
    • /
    • pp.946-951
    • /
    • 2007
  • 산업 발전을 지원하는 연구개발 관련 기관들은 R&D 사업에 대한 경제적 근거를 요구받고 있다. 본 연구에서는 R&D 사업의 경제적 파급효과 측정을 위해 예측적 비용편익 분석 방법을 사용한다. 가상현실평가모형으로 비용과 편익을 추정하여 주요 계량적 측도를 계산하는데, 한국표준과학연구원 산업측정 신뢰도 제고사업의 세부과제 중 정량적 평가가 용이한 3개 과제에 대하여 예측적 비용-편익 분석 방법을 적용한다.

  • PDF