• Research in Plant Disease
• /
• v.29 no.3
• /
• pp.243-250
• /
• 2023

To explore the distribution and the resistance reaction of rice blast pathogens that may occur in North Korea, rice blast pathogens in the North Korean border regions of Dandong and Yeon-gil in China and the North Korean border region of Cheorwon in South Korea were analyzed. In addition, comparative analysis was conducted with rice blast pathogen in Suwon and Jeonju, inland regions of South Korea. Resistance reactions above average were observed in monogenic rice lines (IRBLzt-T, IRBL9-W, IRBL20-IR24, and IRBLta-CP1) in Jeonju, Suwon, and Cheorwon from 2018 to 2020. In Dandong and Yeon-gil, the monogenic lines IRBLz5-CA, IRBL12-M, and IRBL19-A consistently showed resistance reactions for three years. Notably, IRBL19-A exhibited strong resistance. Race distribution analysis in South Korea indicated a shift from KI to KJ dominance from 2018 to 2020, while in the North Korean border regions of Dandong and Yeon-gil, the KI race was dominant in 2021 and 2022. The race distribution of rice blast pathogens in China's North Korean border regions differed significantly from that in South Korea.

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.217-226
• /
• 2004

One hundred isolates of Magnaporthe grisea from Korea and China were characterized for pathogenicity using eight Korean differential varieties(KDV), six Chinese differential varieties(CDV) and six near isogenic lines(NILs) developed in China. The restriction length polymorphism of M. grisea isolates from each country also was analyzed using MGR586 as a probe. One hundred Korean isolates classified into 17 races on KDV were grouped into 29 pathotypes on Chinese near isogenic lines(NILs). Virulence of 46% of Korean isolates against all the six Chinese NILs indicated that the current six Chinese NILs alone was not enough to be used as differential varieties in Korea. Especially, susceptibility of the BL1 carrying resistance gene Pi-b to 70% of tested Korean isolates suggested that BL1(Pi-b) may not be a useful resistance source to Korean blast. Based on the virulence assays of M. grisea populations from each country were divided into two groups. About 50% of Chinese isolates showed similarity to the 30% of the Korean isolates. Especially, the isolates from northern part of China, where Japonica rice cultivars were grown, showed high similarity to the Korean isolates, while isolates from southern part of China, where Indica rice were mainly grown, showed low similarity to Korean isolates. The genome RFLPs of Korean isolates were quite different from those of southern part of China using MGR586 as a probe. These data indicated that the physiological and genetical characteristics of M. grisea population might be determined by strong interaction with cultivated rice.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.765-774
• /
• 1995

The hot deformation behaviour of particulate reinforced aluminium 6061 Al composite were investigated by hot compression tests in the temperature range from 623K to 823K with strain rate of 10$^{-3}$ ~5.0 S$^{-1}$ . The effect of reinforced particulate volume fraction, mean diameter on the high temperature flow stress has also been studied. Experimental results showed that the increase in the volume fraction of reinforcement contributed to the rising of yield stress, but the stress above the yield point appeared to be steady state at all volume fractions. The apparent activation energy for deformation was 290KJ/mo1 for unreinforced 6061 Al, 327KJ/mo1 for 6061 Al-20vo1.% SiC composite and 531KJ/mo1 for 6061 Al-20vo1.%A1$_2$O$_3$composite. It appeared that $Al_2$O$_3$reinforced composites was more difficult to hot deform.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.87-93
• /
• 2011

Nonlinear loads including lighting fixtures generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probabilistic approach is the most commonly used method to solve time varying harmonics. In this paper the time varying harmonics of lighting loads are evaluated by international harmonic standards(IEC 61000-3-6).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.405-412
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) to 16.7%(w.b) moisture contents using the prototype dryer. The average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to the conventional natural air dryer where is grains were not circulated during drying periods. The dryer performance evaluation index was 738.3KJ/(kg.water), which was more effective than that of grain circulation t)pe hot air dryer(3,500-5,000 KJ/kg.water).

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.111-117
• /
• 2008

This study provides the setting time prediction method of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24{\sim}35KJ/mol$ with slightly difference along with mixture proportion. This value is smaller than existing value $30{\sim}50KJ/mol$. It is Indicated that equivalent age using setting time can be a proper method to predict setting time and it also exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided setting time prediction value with super retarding agent contents and mineral admixture combination. Setting time prediction equation provided herein is possibly valid for estimating precise setting time of the super retarding concrete at the job site.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.207-208
• /
• 2018

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.41-46
• /
• 1984

The pectic enzymes produced from Aspergillus niger were separated into three fractions (F-A, F-I and F-II) by means of Sephadex and DEAF-Sephadex column chromatography. Each enzyme fraction was characterized by determining viscosity change and reducing surgar of the pectic acid-enzyme mixture and analyzing thin layer chromatogram of the reaction products. F-I rapidly reduced the viscosity of pectic acid solution and released reducing groups in a random manner so that appeared to be an endo-polygalacturonase (endo-PG). The optimum pH of endo-PG for viscosity reducing activity was 4.2 and that for releasing reducing surgar was 4.7. In the thermal inactivation of endo-PG of $30-45^{\circ}C$, the enthalpy of activation was 217.3 kj/mole and z-value was $7.5^{\circ}C$. F-II and F-A were determined as endo-polymethylgalacturonase and exo-polygalacturonase, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.73-78
• /
• 2006

In this paper, creep tests of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys, which were casted by mold with Mg-3%Zn-1%Mn and Mg-3%Zn-1%Mn-0.2%Ca, were done under the temperature range of 473-573K and the stress range of 23.42-78.00Mpa. The activation energies and the stress exponents were measured to investigate the creep plastic deformation of those alloys, and the rupture lifes of Mg-Zn-Mn alloy were also measured to investigate the fracture behavior. From the results, the activation energy of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys under the temperature range of 473-493K were measured as 149.87, 145.98KJ/mol, respectively, and the stress exponent were measured as 5.13, 6.06 respectively. Also the activation energies Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys under the temperature range of 553-573K were obtained as 134.41, 129.22KJ/mol, respectively, and tress exponent were obtained as 3.48, 4.63, respectively. Finally stress dependence of rupture life and the activation energy of rupture life of Mg-Zn-Mn under the temperature range of 473-493K was measured as 8.05, 170.0(KJ/mol), respectively, which were a little higher than the results of steady state creep.

• Korean journal of food and cookery science
• /
• v.19 no.1
• /
• pp.121-126
• /
• 2003

Lentinus ededes were irradiated with Utraviolet-B(UV-B) at 0, 2.5, 5.0 J/$\textrm{cm}^2$ levels while culturing in sawdust medium, and the changes in vitamin D$_2$ content, color and flavor of the mushroom were analysed by high-performance liquid chromatography (HPLC), Hunter-Lab Chromatometer and Gas Chromatography-Surface Acoustic Wave (GC-SAW) electric nose, respectively. Irradiation of 0, 2.5, 5.0 J/$\textrm{cm}^2$ doses of UV-B increased the content of vitamin D$_2$ in the mushroom significantly, which was 157∼206% higher than the control group. There was a significant difference in L value between the control group and UV-B irradiated (2.5 and 5.0 J/$\textrm{cm}^2$) groups. The changes of flavor pattern were detected by GC-SAW electric nose. But the color and flavor changes were not detrimental to the quality of the mushroom. The results suggested that UV-B irradiation is a good way to increase the vitamin D$_2$ content of Lentinus edodes during cultivation.