• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.379-390
• /
• 1994

The recent study of the delay models have assumed random arrival which has a constant average flow rate throughout the cycle. However, where signals are spaced closely together or form part of progressive system, platoon flows are common and more closely represent reality. In such cases, those results are quite different pattern of estimated delay from that of observed one. In order to solve this problem, the 1985 HCM takes Progression Adjustment Factor (PAF) into account. In the 1985 HCM, however, it has deficiencies in defining and applying it, such as platoon ratio ($R_p$) and platoon arrival type. The Purpose of this study is to investigate theoretically the predictive ability of the individual models concerned through comparing the estimated delay and PAF suggested by NCHRP Report 339, KHCM or USHCM (1985) with the observed obtained by field survey at a signalized intersection.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.152-161
• /
• 2014

The total boarding and alighting time models have been developed by applying the multiple regression analysis with three variables; numbers of boarding or alighting passengers, non-sitting passengers, and the step-height from the ground. Such variables have influenced to the total boarding time model with the most influential in the numbers of boarding or alighting passengers and the least in the step-height. On the total alighting time model, the numbers of alighting passengers are the most strongest while the step-heights the least. The total boarding and alighting time models can be used in practices for the prediction of current and future bus stops' capacities in TOD-based towns.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.52-61
• /
• 2015

PCE(Passenger Car Equivalents) is used to analysis of road capacity and LOS(Level of Service). In this study calculates PCE by number of lane and 12 vehicle type by MOLIT(Minister of Land, Infra Structure and Transport) using individual vehicle data. The results of the calculation, PCEs are increased when high vehicle classification level, many number of lanes and weekend. Heavy vehicle factors are smaller than KHCM on 4, 6 lane. Also, In this study estimates of PCE variation model by heavy vehicle percentage. Impact of Heavy vehicles on PCEs is the most sensitive on 2 lane. The results of the study, heavy vehicles low impact on PCE on multi-lane and business trips are a little in weekend.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.131-138
• /
• 2012

PURPOSES : Two-lane highways have one lane in each direction, and lane changing and passing maneuvers take place in the opposing lane depending on the availability of passing sight distance. 2001 Korea Highway Capacity Manual (KHCM) is classified into two classes of two-lane highways (Type I, II), and average travel speed and time-delayed rate are used as measures of effectiveness (MOEs). However, since existing two-lane highways have both uninterrupted and interrupted traffic flow-system elements, a variety of free-flow speeds exhibits in two-lane highways. In addition, it is necessary to check if the linear-relationship between volumes and time-delayed rate is appropriate. Then, this study is to reestablish the relationship between average travel speed, time-delayed rate, and flow. METHODS : TWOPAS model was selected to conduct this study, and the free-flow speeds of passenger cars and the percentage of following vehicles observed in two-lane highways were applied to the model as the input. The revised relationships were developed from the computer simulation. RESULTS : In the revised average travel speed vs. flow relationship, the free-flow speed of 90km/h and 70km/h were added. It shows that the relationship between time delayed-rate and flow appeared to be appropriate with the log-function form and that there was no difference in time-delayed rate between the free flow speeds. In addition to revise the relationships, the speed prediction model and the time-delayed rate prediction model were also developed. CONCLUSIONS : The revised relationships between average travel speed, time-delayed rate, and flow would be useful in estimating the Level of Service(LOS) of a two-lane highway.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.75-84
• /
• 2012

PURPOSES : This paper aims to improve the evaluation method of the Level of Service(LOS) for urban streets presented by the current Korean Highway Capacity Manual(KHCM) and suggest its utilization plan as a part of the methods to evaluate the sustainability of a transportation policy. METHODS : This paper carried out a research in 3 steps to develop a new evaluation method. First of all, this paper reviewed the previous studies related to the LOS of urban streets and the socially requested items for a sustainable transportation system. Then this paper derived an index and weight through expert questions to select an evaluation index. Lastly, this paper compared the results according to the existing evaluation methods with the new evaluation methods through case studies. This paper used an Analytic Hierarchy Process(AHP) for importance analysis and weight selection between new evaluation items and indices, and applied a Grey System Theory(GST) for a synthetic and integrated evaluation between the selected evaluation indices. RESULTS : As a result of evaluating the LOS according to the existing evaluation methods and the integrated evaluation methods using a GST through case studies, it was analyzed that new methods' results are less than or equal to the existing evaluation methods; and as a result of applying a weight between evaluation indices according to AHP, it was noticed that the total score seems to rise more when the LOS in the existing evaluation is calculated lower. It was analyzed that the LOS calculated by reflecting the newly established evaluation items and the importance between indices in this study has difference from the LOS of the existing urban streets. CONCLUSIONS : It is expected that this evaluation method can diagnose the current conditions when establishing a future sustainable traffic system and can be used for the measurement of the sustainability effects of the improvement plans and so on.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2002

The influence of bus stops near signalized intersections is one of the important factors which cannot be negligible in the analysis of the capacity of signalized intersections. Absence of consideration of bus bay can reduce capacity and increase the time that the stop of buses block other traveling vehicles. This influence is reflected by the bus blockage adjustment factor in KHCM, but the factor does not consider the course of each bus passing the intersection. Particularly, left turn buses have more influence on the capacity than the other buses and require the minimum length of the road for lane changes. All the existing criteria can apply only to arterial roads on which mostly traffic flows are continuous. And the criteria. which can determine the optimum location and the minimum distance between a signalized intersection and a bus bay, is not prepared and the related study is insufficient. Therefore, a theoretical formula is derived in this study being based on the theories which are avaliable to apply to the situation of signalized intersections.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.73-81
• /
• 2012

The bicycle is an environment-friendly transport mode leading to a more sustainable transportation system. To innovatively increase the use of bicycle as a significant transport mode, bicycling-friendly roadway environment should be provided. From this perspective, the scientific and effective assessment of roadway environment in term of the bicyclist perception for safety and comfortability is of keen interest. This study develops a methodology for evaluation cycling environment using probe bicycles. A global positioning system(GPS) based speedometer was used to collect bicycle speed data. Cycling comfortability index(CCI) was derived for the purpose of evaluating cycling environment. The proposed CCI can be effectively used as an assessment tool in the field of bicycle transportation.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.582-590
• /
• 2015

Road type classification and K-factors are important role when design of number of lane. In this study not only classifies road type and estimating of K-factor but also economic evaluation tries for feasibility verification. Road type analysis results, time of day traffic volume variation, weekend-factor and vacation-factor are large in recreation roads. Weekday traffic volume and weekend traffic volume are similar patterns in provincial roads. AADT is high and time of day traffic volume variation is small in urban roads. In this study compares with economic analysis that designing of number of lane between KHCM's K-factor and this study K-factor. Economic analysis results, designed roads by this study's K-factor reduce cost about 4,708 hundred million won. So this study's K-factor is economical on provincial 4 lane roads.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.143-150
• /
• 2021

Roundabouts have been spreading out all over the world quickly with their attractions including capacity enhancement, safety increase and pollutant emission decrease. The history of Korean roundabout has already been 10 years. However, due to the accumulation of unclear right of way and insufficient data, the advantages of the roundabout are not fully utilized so far. Moreover, there are some differences in the capacity model of roundabouts compared to overseas capacity models. In addition, most research tend to concentrate in evaluation of roundabout performance using computer software. This paper, therefore, investigated overseas typical roundabout capacity models; empirical model and gap acceptance model, and then KHCM 2013 was compared to SIDRA model and USHCM 2010 model. It is expected that this paper will assist and guide practitioners in analyzing and estimating roundabout capacity more precise.