• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.4063-4066
• /
• 2012

To determine the clinical outcome of breast cancer BI-RADS 4 lesions and seek a more effective management guideline, we conducted a retrospective study of all BI-RADS4 patients diagnosed between 2003-2008 with follow up time not less than 2 years. A total of 392 cases of BI-RADS 4 were identified and 320 could be sub-categorised as 4a, 4b and 4c. Overall malignant positive results were 7.65, 38.7 and 58.percent, respectively. In all cases assigned to the close follow up group, no malignancy was detectable (P<0.02). The results of the study suggested that BI-RADS sub-categories have benefit for cancer diagnosis and treatment decisions of clinicians and it might be possible to set up a safe follow-up guideline in selected groups of patients to minimize un-necessary tissue biopsy for breast cancer detection.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.236-240
• /
• 2000

Bi-2223 HTS current leads for a superconducting magnetic energy storage(SMES) magnet were designed and manufactured. The HTS leads composed of Bi-2223/AgAu tapes and stainless steel former were connected to conventional vapor-cooled copper leads. The heat input to the liquid helium through the HTS lead was 0.39 W/lead when the warm end part's temperature is 65 K. And, the critical current of the HTS leads was about 1.6 kA when the warm end part's temperature is 80 K. The measured those values are well consistent with computed values.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.22-28
• /
• 2017

In-Bi-Sn alloy sheet has been used as a thermal fusible parts of secondary battery safety system. This study offers a simple process to make In-Bi-Sn alloy fusible parts. The process consists of two procedures, melting and sheeting by tape casting. 62.5 wt%-In 20.0 wt%-Bi 17.5 wt%-Sn (M.P. $92.4^{\circ}C$) alloy sheet obtained by tape casting was used as the thermal fusible sheet of thermal fuse system for mobile telephone. The performance test of the system was carried out in oil bath, and the fusible alloy sheet was melted and cut off at $95^{\circ}C$. This results confirmed the possibility that the alloy sheet obtained by tape casting can be usable as a thermal fusible parts of battery safety system. And this process can be applied as a simple process to recycle the In-Bi-Sn alloy scrap separated from the used thermal fuse system.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.678-683
• /
• 1996

In the fabrication processes of thin film thermoelectrics, a subsequent annealing treatment is inevitable to reduce the defects and residual stresses introduced during the film growth, and to make the uniform carrier concentration of the film. However, the diffusion-induced atomic redistribution and the broadening of p/n junction region are expected to affect the thermoelectric properties of thin film modules. The present study intends to investigate the diffusion at the p/n junctions of thermoelectric thin films and to relate it to the property changes. The film junctions of p-type(Bi0.5Sb1.5Te3)and n-type(Bi2Te2.4Se0.6)were prepared by the flash evaporation method. Aluminum thin layer was employed as a diffusion barrier between p-and n-type films of the junction. This was found to be an effective barrier by showing a negligible diffusion into both type films. After annealing treatment, the thermoelectric properties of p/n couples with aluminum barrier layer were accordingly retained their properties without any deterioration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.35-36
• /
• 2008

PTC thermistor are characterized by an increase in the electrical resistance with temperature. The PTC materials of middle Curie point were produced or that of high Curie point (above $200^{\circ}C$), it was determined that compositional modifications of $Pb^{2+}$ for $Ba^{2+}$ produce change sin the Curie point to higher temperature. PTC ceramic materials with the Curie point above $120^{\circ}C$ were prepared by adding $PbTiO_3$, PbO or $Pb_3O_4$ into $BaTiO_3$. Thereby, adding $Pb^{2+}$ into $BaTiO_3$-based PTC material to improve Tc was studied broadly, however, weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $Bi_{1/2}K_{1/2}TiO_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0, 1, 2, 3, 4, and 50mol% of $Bi_{1/2}K_{1/2}TiO_3$. $Bi_{1/2}K_{1/2}TiO_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Bi_2O_3$, $K_2CO_3$, $BaCO_3$ and $TiO_2$ powder, and using solid-state reaction method, too. The microstructures of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction.

• The Journal of Dong Guk Oriental Medicine
• /
• v.8 no.2
• /
• pp.83-96
• /
• 2000

Objective This experimental study was designed to investigate effects of Sam-chool-gun-bi-tang administration during carbohydrate loading diet to long distance runners on changes of the urine metabolic responses. Materials and Methods All subjects were divided randomly with two groups, Sam-chool-gun- bi-tang administration Group (N=5) and control group (N=5) and attended on domestic marathon race. The urine samples were collected by 15ml conical tube at rest, a day before race, immediately after race, a day after race. These samples were used to analyze for the factors of the change on metabolic responses. At First, the factors of the routine urine test were checked; RBC, WBC, glucose, protein, ketone, bilirubin, urobilirubin. Next, the factors on the changes of the electrolyte metabolism and creatinine were checked; $Na^+ $, $Cl^-$, $K^+$, $Ca^{+ +}$, Creatinine. Results 1. Urine RBC, WBC, glucose, protein, ketone, bilirubin, urobilirubin were all denoted negatively (-). 2. Urine pH response in Sam-chool-gun-bi-tang administration group was shown significant difference between two groups at immediately after race. 3. Urine $Na^+$ response in Sam-chool-gun- bi-tang administration group was shown significant difference between two groups at immediately after race. 4. Urine $K^+$ response in Sam-chool-gun-bi-tang administration group was shown significant difference between two groups at immediately after race and a day after race. 5. Urine $Cl^-$ response in Sam-chool-gun- bi-tang administration group was increased at immediately after race, but was not shown significant difference between two groups. 6. Urine $Ca^{+ +}$ response in Sam-chool-gun-bi-tang administration group was decreased gradually, but was not shown significant difference between two groups. 7. Urine Creatinine response in Control group was decreased significantly at immediately after race, but was not shown significant difference between two groups. Conclusion According to the above results, it was shown that Sam-chool-gun- bi-tang administration had the positive effects on changes of the urine matabolic responses during carbohydrate loading diet to the long distance runners.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2015

Thermoelectric (TE) technology is becoming increasingly important in applications of solid-state cooling and renewable energy sources. $Bi_2Te_3$-based TE materials are widely used in small-scale cooling and temperature control applications; however, higher levels of TE performance are required for new applications such as large-scale cooling (e.g., domestic refrigerators or air conditioners) and for highly efficient power generation system. Recently, the TE performance of $Bi_2Te_3$-based materials has been remarkably enhanced by the introduction of nanostructuring technologies which can be used to prepare TE raw materials. Because it takes into account the theoretical and experimental characteristics, nanostructuring has been shown to be one of the most promising ways to realize the simultaneous control of the electronic and thermal transport properties. In this review, emphasis is placed on bulk-type nanostructured $Bi_2Te_3$-based TE materials. Nanostructuring technologies for enhanced TE performance are summarized, and a few important strategies are presented.

• Coupled systems mechanics
• /
• v.5 no.2
• /
• pp.101-126
• /
• 2016

Seismic structural fragility constitutes an important step for performance based seismic design. Lateral load-resisting structural members are often analyzed under one component base excitation, while the effect of bi-directional shaking is accounted per simplified rules. Fragility curves are constructed herein under real bi-directional excitation by a simple extension of the conventional Incremental Dynamic Analysis (IDA) under uni-directional shaking. Simple SODF systems, parametrically adjusted to different periods, are examined under a set of near-fault and far-fault excitations. Consideration of bi-directional interaction appears important for stiff systems. Further, the study indicates that the peak ground accelertaion, velocity and displacement (PGA, PGV and PGD) of accelerogram are relatively stable and efficient intensity measures for short, medium and long period systems respectively. '30%' combination rule seems to reasonably predict the fragility under bi-directional shaking at least for first mode dominated systems dealt herein up to a limit state of damage control.

• Journal of Korea Foundry Society
• /
• v.26 no.4
• /
• pp.191-196
• /
• 2006

The effects of Bi and Te on the anti-galling behaviors of Ni base alloy were investigated by SEM, galling test and wear test. Anti-galling characteristics depended on the structure of matrix and distribution of Bi-rich phase which was precipitated at grain boundary. The addition of 5 wt% Bi markably enhanced anti-galling properties. The addition of Te caused Bi-rich precipitates to disperse finely and casting structure to form equiaxed type. From the above tests, the concentration of 5 wt% Bi and 1 wt% Te was selected to optimize in this alloy.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.239-243
• /
• 2008

In this study, Bi-Sb thin film structure was prepared by thermal evaporation method. The electrical, optical transmission and structural characteristics of the prepared samples were introduced before and after thermal annealing process. At temperature of $500^{\circ}C$, the absorption of the structure was improved to reach 97% at near-infrared region. As well, the thermal annealing caused to reduce the bulk resistance of the Bi-Sb thin film structure. The morphology of Bi-Sb structure was also improved by thermal annealing as characteristic islands of the structure appear clearly in form hexagonal areas distinct from each other. This study is aiming to examine such structures if they are employed as photonic devices such as photodetectors, LED's and optical switches.