• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.992-1000
• /
• 1998

In the present study the behavior of laminar-wavy film flowing down a vertical plate was studied analytically. The effects of film Reynolds number and interfacial shear stress on the mean film thickness, wave amplitude, wave length, and wave celerity were analysed. The anayltical results on the periodic-wave falling film showed good agreements with experimental data for Re < 100. As the film Reynolds number increased, mean film thickness, wave amplitude, and wave celerity increased, but wave length decreased. Depending on the direction of interfacial shear stress, the shape of wavy interface was disturbed significantly, especially for the intermediate-wave. As the interfacial shear stress increased, for the periodic-wave film, wave amplitude and wave celerity increased, but mean film thickness and wave length decreased.

• 한국수정란이식학회지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2015

The cold shock of spermatozoa is associated with oxidative stress induced by reactive oxygen species. This study was conducted to evaluate the toxicity of natural antioxidant green tea extract (GTE) in lactose-egg yolk (LEY) extender during boar sperm cooling prior to freezing. Spermatozoa were cooled to $5^{\circ}C$ for 3 h in LEY extender containing 0 (control), 1, 10, 100 or 1,000 mg/l of GTE, re-suspended with LEY-glycerol-Equex extender and cooled at $5^{\circ}C$ for 30 min. Sperm progressive motility, viability and phosphatidylserine (PS) translocation were evaluated. PS translocation was assayed by flow cytometry using Annexin V-FITC apoptosis detection kit. The sperm function including progressive motility, viability and PS translocation was not significantly different regardless of GTE concentrations (P>0.05). In conclusion, this study demonstrated non-toxicity of GTE supplement in LEY extender during sperm cooling.

• 한국농공학회논문집
• /
• 제51권4호
• /
• pp.57-66
• /
• 2009

수학적 모델은 수량과 수질의 예측을 위해 현장 조사의 대안으로 사용되어지며 이러한 모델의 사용과 실측에 불확실성이 존재하게 된다. 불확실성에 대한 많은 연구들이 진행되어 왔으나 시나리오에 의한 모델링 과정에서 발생하는 불확실성에 대한 연구는 미흡한 실정이다. 본 연구에서는 산림이 농경지와 목초지로의 변화에 따른 시나리오를 설계한 후 시나리오 적용에 따른 SWAT (Soil and Water Assessment Tool) 매개변수의 불확실성을 분석하고자 하였다. 몬테카를로 기법 (Monte Carlo simulation)을 이용하여 각 매개변수별 1,000개의 난수를 발생하였으며 앙상블 유량모의 기법을 이용하여 미국 Alabama주 카하바강 상류 (50,967ha)를 대상으로 각 난수별 100개의 유량을 통해 불확실성을 분석하였다. 분석 결과 산림지역이 농경지와 목초지로 변화 되었을 때 유출량이 증가하는 것으로 분석되었으며, 임야가 목초지 보다 농경지로 변화되었을 때 유출량은 더욱 증가하는 것으로 나타났다. 각 시나리오별 SWAT 매개변수의 불확실성은 AWC (Available water capacity), CN (Curve number), GWREVAP (groundwater re-evaporation coeffeicient), REVAPMN (minimum depth of water in shallow aquifer for re-evaporation to occur)순으로 크게 나타났으며, Ksat (Saturated hydraulic conductivity)와 ESCO(Soil evaporation compensation factor)는 유출량의 변화에 큰 영향을 미치지 못하는 것으로 분석되었다. 토지피복별 산림 면적이 클 경우 불확실성이 크게 나타나 산림이 목초지와 농경지로 변함에 따라 불확실성은 감소하는 것으로 나타났다.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.296-300
• /
• 2003

Extended cylindrical magnetron sputtering system with rotating 600-mm long and 90-mm diameter graphite cathode and pulsed power supply voltage generator were developed and fabricated. Time-dependent Langmuir probe characteristics as well as carbon films thickness were measured. It was shown that ratio of ions flux to carbon atoms flux for pulsed magnetron discharge mode was equal to $\Phi_{i}$ $\Phi$sub C/ = 0.2. It did not depend on the discharge current in the range of $I_{d}$ / = 10∼60 A since both the plasma density and the film deposition rate were found approximately proportional to the discharge current. In spite of this fact carbon film structure was found to be strongly dependent on the discharge current. Grain size increased from 100 nm at $I_{d}$ = 10∼20 A to 500 nm at $I_{d}$ = 40∼60 A. To deposit fine-grained hard nanocrystalline or amorphous carbon coating current regime with $I_{d}$ = 20 A was chosen. Pulsed negative bias voltage ($\tau$= 40 ${\mu}\textrm{s}$, $U_{b}$ = 0∼10 ㎸) synchronized with magnetron discharge pulses was applied to a substrate and voltage of $U_{b}$ = 3.4 ㎸ was shown to be optimum for a hard carbon film deposition. Lower voltages were not sufficient for amorphization of a growing graphite film, while higher voltages led to excessive ion bombardment and effects of recrystalization and graphitization.

• 수산해양교육연구
• /
• 제12권2호
• /
• pp.191-198
• /
• 2000

이 연구는 제주도 연안에 분포되어 있는 정치망에서 음향 집어기에 의한 어류의 유집에 대한 기초 자료를 제공할 목적으로, 정치망의 주요 어획 대상 어류인 독가시치를 선택하여, 가청 수중음과 전기 자극을 이용하여 음향 조건학습시켰으며, 주파수와 음압을 변화시켜가면서 심전도를 도출하여 심박 간격의 변화로부터 청각 능력을 알아내는 방법을 이용하여, 독가시치의 청각 문턱치 및 청각 임계비를 측정 조사 한 결과 75, 79, 83의 3단계 백색잡음을 방성하였을 때 독가시치의 청각 문턱치는 백색잡음이 없을 때보다 높게 나타나 마스킹 효과가 나타났고, 측정주파수 200Hz, 300Hz에서 보다 뚜렷하게 나타났다. 독가시치의 청각 임계비는 측정주파수 80, 100, 200, 300, 500, 800Hz에서 대략 28, 23, 31, 34, 40, 52dB이고 마스킹 현상은 음압이 약 70dB 이상의 잡음레벨에서 나타나기 시작하였고 측정주파수 100 - 200Hz에서 신호음을 인식하기 위해서는 음압이 대략 98dB이상, 배경잡음레벨보다 약 23dB이상의 높은 음압이 요구되었다.

• 설비공학논문집
• /
• 제19권10호
• /
• pp.726-734
• /
• 2007

In this study, lower flammability limits (LFLs) of three hydrocarbon refrigerants (R600a, R290, R1270) and two hydrofluorocarbon refrigerants (R152a, R32) and DME (RE170) are measured by the method proposed by ASTM E681-04 Standard. Flammability tests are carried out at three temperatures of $23^{\circ}C,\;60^{\circ}C\;and\;100^{\circ}C$ and relative humidity 50%. Test results show that the present data for isobutane and propane obtained at $23^{\circ}C$ are similar to those found in the literature, confirming indirectly the reliability of the present test method and facility. For propylene, R152a, and R32, LFLs found in the literature differ considerably. Especially, the deviation of LFL of propylene is more than 30% among the literature data. The present data for propylene, R152a, and R32 agree with either of the data sets available. As the temperature increases from $23^{\circ}C\;to\;100^{\circ}C$, LFLs of all refrigerants tested decrease. LFLs of most refrigerants tested in this study at $60^{\circ}C$ decrease by $0.1{\sim}0.3%$ as compared to those at $23^{\circ}C$. Also LFLs of most refrigerants tested in this study at $100^{\circ}C$ decrease by $0.1{\sim}0.3%$ as compared to those at $60^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권6호
• /
• pp.849-856
• /
• 2017

Objective: The net energy requirement for the maintenance ($NE_m$) of broilers was determined using regression models by the indirect calorimetry method (ICM) or the comparative slaughter method (CSM). Methods: A $2{\times}4$ factorial arrangement of treatments including the evaluation method (ICM or CSM) and feed intake (25%, 50%, 75%, or 100% of ad libitum recommended) was employed in this experiment. In the ICM, 96 male Arbor Acres (AA) birds aged d 15 were used with 4 birds per replicate and 6 replicates in each treatment. In the CSM, 116 male AA birds aged d 15 were used. Among these 116 birds, 20 were selected as for initial data and 96 were assigned to 4 treatments with 6 replicate cages and 4 birds each. The linear regression between retained energy (RE) and metabolizable energy intake (MEI) or the logarithmic regression between heat production (HP) and MEI were used to calculate the metabolizable or net energy requirement for maintenance ($ME_m$) or $NE_m$, respectively. Results: The evaluation method did not detect any differences in the metabolizable energy (ME), net energy (NE), and NE:ME of diet, and in the MEI, HP, and RE of broilers. The MEI, HP, and RE of broilers decreased (p<0.01) as the feed intake decreased. No evaluation method${\times}$feed intake interaction was observed on these parameters. The $ME_m$ and $NE_m$ estimated from the linear relationship were 594 and 386 kJ/kg of body weight $(BW)^{0.75}/d$ in the ICM, and 618 and 404 kJ/kg of $BW^{0.75}/d$ in the CSM, respectively. The $ME_m$ and $NE_m$ estimated by logarithmic regression were 607 and 448 kJ/kg of $BW^{0.75}/d$ in the ICM, and were 619 and 462 kJ/kg of $BW^{0.75}/d$ in the CSM, respectively. Conclusion: The NEm values obtained in this study provide references for estimating the NE values of broiler diets.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.47-47
• /
• 2010

Discharge under the water is very hard and demand considerable high voltage. But specially improved electrode can generate plasma discharge to salty water with relatively low voltage. A round shape ceramic electrode having many pinholes combined with metallic one can generate plasma. 400 volt, 10 kHz and 3 micro second pulse width were applied to repeatedly running synthetic seawater with 10 L/m velocity, containing cultivated E. coli and Bacillus. As a result, 18, 94, 99.97, 100, 100 % disinfection rates to E. coli and 17.1, 17.1, 82.9, 99.4, 99.9 % disinfection rates to Bacillus subtilis were achieved to 1, 2, 3, 4, 5 times repetitive treatment respectively. In the plasma condition, the ions and electrons are separated and new kinds of components are re-synthesized by the intensive movement of the components. Especially chlorine ions are separated and recombined to residual free chlorine like HOCl, $OCl^-$. The residual free chlorine concentrations of discharged water were 0.25, 0.88, 1.39, 1.59, 1.66 mg $Cl_2$/L after 5 times treatment respectively. Another unconfirmed radical and oxidants for example, OH, $H_2O_2$, and $O_3$ can have an effect on microorganism of course.

• Journal of Animal Science and Technology
• /
• 제49권2호
• /
• pp.287-294
• /
• 2007

성판별을 위한 biopsy 후 수정란의 발달율 및 동결－융해 후의 생존율 조사는 다음과 같다. 한우 체내 및 체외 수정란의 성판별을 위해서 영양막 세포의 일부를 채취하기 위해서 수정란을 biopsy 하였다. biopsy된 수정란의 생존율 조사의 결과는 체내 수정란이 100% 그리고 체외수정란이 90.0%의 결과를 나타내어 체내 수정란이 체외 수정란 보다 biopsy 후의 생존율이 높게 나타났음을 알 수 있었다. 수정란의 성판별 비율은 체내 수정란에서는 암컷과 수컷의 비율이 46.3%와 53.7%로 각각 나타나 수컷의 비율이 암컷 보다 다소 높은 경향을 보였으며, 체외 수정란에 있어서는 암컷과 수컷의 비율은 40.0% 와 60.0%로 수컷의 비율이 높게 나타났으나 유의적인 차이는 보이지 않았다. 성판별된 수정란의 동결－융해 후 생존성은 완만동결 방법에 의한 수정란의 생존율은 체내 수정란에서 58.8 %, 체외 수정란에서는 41.7% 그리고 초자화동결 방법에서는 체내 수정란의 생존율이 77.8%, 체외 수정란은 57.1%로의 결과를 보여 체내 수정란을 이용한 초자화동결 방법에서 상대적으로 더 높은 생존율을 보였다.

• 자원리싸이클링
• /
• 제24권6호
• /
• pp.9-16
• /
• 2015

폐리튬이차전지 양극재 재활용기술에 있어 침출과정을 통해 회수된 유가금속을 다시 원하는 조성의 전구체로 재합성하는 공침공정은 필수적이다. 본 연구에서는 고용량 특성의 Ni-rich 조성인 $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622) 양극재의 전구체 재합성 시 암모니아가 불순물로서 미치는 영향을 확인하는 공침실험을 수행하였다. SEM 및 EDS 분석결과 양극재 전구체 최적 합성조건(금속염 용액 농도 2 M 기준 암모니아수 농도 1 M)에서 암모니아 농도가 증가할수록 원하는 조성의 전구체가 제조되지 않음을 확인하였다. Ni의 설계함량인 60 mol%를 기준하여 암모니아수 농도 1 M ~ 4 M 조건에서 각각 100%, 98%, 95%, 87%에 해당하는 공침효율을 보여주었다. 또한 제조된 전구체 입자들의 구형화도, 균일도 및 크기분포특성 등의 형상학적 특징을 확인하였다.