• 한국전기전자재료학회논문지
• /
• 제20권2호
• /
• pp.106-112
• /
• 2007

Advanced back-end processing requires the integration of low-k dielectrics and Cu. However, in the presence of an electric field and a temperature, positive Cu ions may drift rapidly through dielectric and causing reliability problems. Therefore, in this paper, Cu+ drift diffusion in two low-k materials and silicon oxide is evaluated. The drift diffusion is investigated by measuring shifts in the flat band voltage of capacitance-voltage measurements on Cu gate capacitors after bias thermal stressing. The Cu+ drift late in $SiO_{x}C_{y}\;(2.85{\pm}0.03)$ and Polyimide(2.7${\leq}k{\leq}3.0$) is Considerably lower than in thermal oxide.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.57-65
• /
• 1995

For the mechanism of ship capsizing, we can generally consider that it\`s caused due to pure loss of stability, parametric oscillation(low cycle resonance) of ship in waves and the broaching phenomena. Among them, low cycle resonance occurs due to the dynamic change of righting arm with respect to the relative position of ship to waves. The dynamic change depends on the encounter period of a ship in following waves. This paper discusses the following items : (1) An analytical expression of GZ curve varying with respect to the relative position of ship to waves, (2) Non-linear equation of motion describing low cycle resonance, (3) The effects of righting arm, stability range and encounter period on low cycle resonance.

• Journal of Magnetics
• /
• 제17권3호
• /
• pp.172-175
• /
• 2012

We present a method for detecting very weak radiation by analyzing the inner structure of irradiated tris (lyoluminescence) materials using electron paramagnetic resonance (EPR) at low temperature. Organic materials have been looked into for use in emergency dosimetry of inhabitants around radiation accidents. However, this technology has never been applied to imperceptible radiation doses (< 0.5 Gy) because there is no proper method for detecting the change of inner structure of the subject bombed by very weak radiation at room temperature. Our results show that tris materials can be applied as a radiation detectors of very small radiation doses below 0.05 Gray, if EPR is used at low temperature (130 K ${\leq}$ T ${\leq}$ 270 K). The EPR signal intensity from the irradiated-tris sample had barely faded at all after 1 year.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.23-31
• /
• 2013

Purpose : This study was to investigate effects of pilates and taping on flexibility and muscular strength of low back. Methods : A total of 29 healthy over 20 years old college students(men = 6, women = 23) who were participated in this. We selected randomly for lo people of pilates, taping, and 9 people of control group. For the past six weeks, pilates worked out twice aweek for 40 minuates and taping stuck once a week for 24 hours and then we compared before and after muscle strength and flexibility of low back. Results : 1. The sesult compared of flexibility of low back have found no significant diffrences between pilates and taping groups.(P>.05) 2. The result compared of experimental groups have found significant diffrences between before and after flexibility of low back.(P<.05) 3. The result compared of muscle strength of low back have found no significant diffrences between pilates and taping groups.(P>.05) 4. The result compared of experimental groups have found significant diffrences between before and after muscle strength of low back.(P<.05) Conclusion : In conclusion there were not differences between pilates and taping on muscle strength and flexibility of low back. Those were increased in comparison with control group.

• Imaging Science in Dentistry
• /
• 제40권1호
• /
• pp.15-23
• /
• 2010

Purpose : This study was designed to compare the effective doses from low-dose and standard-dose multi-detector CT (MDCT) scanning protocols and evaluate the image quality and the spatial resolution of the low-dose MDCT protocols for clinical use. Materials and Methods : 6-channel MDCT scanner (Siemens Medical System, Forschheim, Germany), was used for this study. Protocol of the standard-dose MDCT for the orthodontic analysis was 130 kV, 35 mAs, 1.25 mm slice width, 0.8 pitch. Those of the low-dose MDCT for orthodontic analysis and orthodontic surgery were 110 kV, 30 mAs, 1.25 mm slice width, 0.85 pitch and 110 kV, 45 mAs, 2.5 mm slice width, 0.85 pitch. Thermoluminescent dosimeters (TLDs) were placed at 31 sites throughout the levels of adult female ART head and neck phantom. Effective doses were calculated according to ICRP 1990 and 2007 recommendations. A formalin-fixed cadaver and AAPM CT performance phantom were scanned for the evaluation of subjective image quality and spatial resolution. Results : Effective doses in ${\mu}Sv$ ($E_{2007}$) were 699.1, 429.4 and 603.1 for standard-dose CT of orthodontic treatment, low-dose CT of orthodontic analysis, and low-dose CT of orthodontic surgery, respectively. The image quality from the low-dose protocol were not worse than those from the standard-dose protocol. The spatial resolutions of both standard-dose and low-dose CT images were acceptable. Conclusion : From the above results, it can be concluded that the low-dose MDCT protocol is preferable in obtaining CT images for orthodontic analysis and orthodontic surgery.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.944-949
• /
• 2003

본 논문에서는 InCaP/GaAs HBT공정을 이용하여 낮은 DC 파워소모, 낮은 NF, 낮은 IMD 와 광대역 특성을 갖는 Ku-band LNB용 이중평형믹서를 설계하였다. 제작된 믹서는 3 V, 16 mA 의 U조건과 -23 dBm의 RF입력 조건하에서 5 dB의 변환이득, 14 dB의 NF, 17.9 GHz의 대역폭 그리고 50.34 dBc의 IMD특성을 얻었다. 낮은 IMD 특성, 광대역폭, 낮은 파워소모 특성은 InGaP/GaAs HBT의 선형성과 광대역 입력 정합기법과 바이어스 점의 최적화를 통해 얻을 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.519-525
• /
• 2015

Positive bias stress-induced instability in amorphous indium-gallium-zinc-oxide (a-IGZO) bottom-gate thin-film transistors (TFTs) was investigated under high $V_{GS}$/low $V_{DS}$ and low $V_{GS}$/high $V_{DS}$ stress conditions through incorporating a forward/reverse $V_{GS}$ sweep and a low/high $V_{DS}$ read-out conditions. Our results showed that the electron trapping into the gate insulator dominantly occurs when high $V_{GS}$/low $V_{DS}$ stress is applied. On the other hand, when low $V_{GS}$/high $V_{DS}$ stress is applied, it was found that holes are uniformly trapped into the etch stopper and electrons are locally trapped into the gate insulator simultaneously. During a recovery after the high $V_{GS}$/low $V_{DS}$ stress, the trapped electrons were detrapped from the gate insulator. In the case of recovery after the low $V_{GS}$/high $V_{DS}$ stress, it was observed that the electrons in the gate insulator diffuse to a direction toward the source electrode and the holes were detrapped to out of the etch stopper. Also, we found that the potential profile in the a-IGZO bottom-gate TFT becomes complicatedly modulated during the positive $V_{GS}/V_{DS}$ stress and the recovery causing various threshold voltages and subthreshold swings under various read-out conditions, and this modulation needs to be fully considered in the design of oxide TFT-based active matrix organic light emitting diode display backplane.

• 소성∙가공
• /
• 제23권2호
• /
• pp.110-115
• /
• 2014

Low cycle fatigue characteristics are very important in the development of automobile suspension parts. Fatigue properties using the strain life approach are usually obtained from low cycle fatigue tests. However, low cycle fatigue testing requires a lot of time and cost. In the current study, an attempt to estimate low cycle fatigue properties of high strength steel sheet from tensile test and tensile simulations is performed. In addition, low cycle fatigue testing was conducted to compare the fatigue properties obtained from tensile testing and simulations. In conclusion, the results effectively predict the low cycle fatigue properties. However, some deviations still exist.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2015

This paper proposes a 2.4 GHz RF oscillator with a very low close-in phase noise performance. This is composed of a low frequency crystal oscillator and three frequency multipliers such as two doubler (X2) and one tripler (X3). The proposed oscillator is implemented as a hybrid type circuit design using a discrete silicon bipolar transistor. The measurement results of the proposed oscillator structure show -115 dBc/Hz close-in phase noise at 10 kHz offset frequency, while only dissipating 5 mW from a 1-V supply. Its close-in phase noise level is very close to that of a low frequency crystal oscillator with little degradation of noise performance. The proposed structure which is consisted of a low frequency crystal oscillator and a frequency multiplier provides new method to implement a low power low close-in phase noise RF local oscillator.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.659-669
• /
• 2015

Face Recognition assumes much significance in the context of security based application. Normally, high resolution images offer more details about the image and recognizing a face from a reasonably high resolution image would be easier when compared to recognizing images from very low resolution images. This paper addresses the problem of recognizing faces from a very low resolution image whose size is as low as $8{\times}8$. With the use of CCTV(Closed Circuit Television) and with other surveillance camera-based application for security purposes, the need to overcome the shortcomings with very low resolution images has been on the rise. The present day face recognition algorithms could not provide adequate performance when employed to recognize images from VLR images. Existing methods use super-resolution (SR) methods and Relation Based Super Resolution methods to construct from very low resolution images. This paper uses a learning based super resolution method to extract and construct images from very low resolution images. Experimental results show that the proposed SR algorithm based on relationship learning outperforms the existing algorithms in public face databases.