• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.17-23
• /
• 2020

In this paper, the efficient periodic unsteady flow analysis is developed by using a Chebyshev collocation operator applied to the time differential term of the governing equations. The partial implicit time integration method was also applied in the governing equation for a fluid, which means flux terms were implicitly processed for a time integration and the time derivative terms were applied explicitly in the form of the source term by applying the Chebyshev collocation operator. To verify this method, we applied the 1D unsteady Burgers equation and the 2D oscillating airfoil. The results were compared with the existing unsteady flow frequency analysis technique, the Harmonic Balance Method, and the experimental data. The Chebyshev collocation operator can manage time derivatives for periodic and non-periodic problems, so it can be applied to non-periodic problems later.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.75-80
• /
• 2009

Despite its flexibility to complex geometry, three-dimensional (3D) electromagnetic(EM) modeling schemes using finite element method (FEM) have been faced to practical limitation due to the resulting large system of equations to be solved. An efficient 3D FEM modeling scheme has been developed, which can adopt either direct or iterative solver depending on the problems. The direct solver PARDISO can reduce the computing time remarkably by incorporating parallel computing on multi-core processor systems, which is appropriate for single frequency multi-source configurations. When limited memory, the iterative solver BiCGSTAB(1) can provide fast and stable convergence. Efficient 3D simulations can be performed by choosing an optimum solver depending on the computing environment and the problems to be solved. This modeling includes various types of controlled-sources and can be exploited as an efficient engine for 3D inversion.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.82-87
• /
• 1986

The water sorption isotherms of binary mixtures, prepared by corn starch and isolated soybean protein (ISP) or casein, were measured and analyzed. Simple equations to predict moisture content from knowledge of composition and water activity of the mixture were derived by applying Response Surface Analysis. Comparison between predicted and experimental moisture content for 13 combinations of corn starch-lSP mixture at the range of $a_w$ 0.25-0.87 resulted in a maximum error of only 6.06% and an absolute mean error of 2.60%, and for the mixture of corn starch-casein the error was -4.39% and 2.12%, respectively. The agreement between experimental and predicted water sorption isotherms was shown to be 'highly acceptable' for the binary mixtures of 50% corn starch-50% ISP and 50% corn starch -50% casein.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1924-1926
• /
• 2004

여러 그룹의 연구 결과로서 고밀도 유도결합 플라즈마원 유체 수송 시뮬레이션을 위해 다양한 경계 조건을 포함한 여러 가지 모델이 제시되어 왔다. 본 연구에서는 가능한 모델들과 경계 조건을 설정하여 FDM(finite difference method), up wind scheme, power-law scheme, die1ectric relaxation scheme[1]을 기반으로한 1차원 시뮬레이션을 통해 정확성과 수치 해석적 안정성 및 효율성 연에서 비교, 검토하였다.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.249-257
• /
• 2003

The bio-telemetry technologies, that use the wireless miniaturized telemetry module implanted in the human body and transmits several biomedical signal from inside to outside of the body, have been expected to solve the problem such as the patient's inconvenience and the limit for diagnosis. In the case of transceiver system using the wireless RF transmission method, the method of three-dimensional localization for implantable miniaturized telemetry module is necessary to detect the exact position of disease. A new method for three-dimensional localization using small loop antenna in the implantable miniaturized telemetry module was proposed in this paper. We proposed a method that can accurately determine the position of telemetry module by analyzing the differences in the strength of signal, which is received at each of the small size RF receiver array installed on the body surface.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.372-378
• /
• 1995

This study describes an analysis on the sinking characteristics in purse seine. The experiment was carried out using three simplified model seines in a flume tank under still water condition. The densities($\rho$) of netting materials were 0.91g/$cm^3$ for PP seine, 1.14g/$cm^3$ for PA seine and 1.38g/$cm^3$ for PES seine. Differential equations were derived from the conservation of momenta of the model seines and used to determine the sinking speeds of the depths of leadline and the other portions of seines. An analysis carried out by simultaneous differential equations for numerical method by subroutine Runge-Kutta-Gill. The results obtained were as follows: 1) Sinking speed of net margin was fastest for PP seine, followed by PA and PES seines. 2) The coefficient of resistance for netting of seine was estimated to be $K_D=0.061({\frac{\rho}{{\rho}_w}})^4$. 3) The coefficient of resistance for netting bundle of seine was estimated to be $C_R=0.91({\frac{\rho}{{\rho}_w}}$. 4) In all seines, the calculated depths of leadline closely agreed with the measured ones(meas.=0.99cal.).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2013

The effect of organic substance on its degradation rate in burial site was investigated using batch tests. Substrate were swine and cattle with the initial concentrations of 2, 4, 6, 8, and 10 g VS(volatile solids)/L, respectively. The highest methane production rates of swine and cattle were found at 2 g VS/L as 46.3 and 48.4 ml CH4/g VS.d, respectively. As substrate concentration increased, the methane production rate decreased. The inhibition constants were n and m that were estimated using nonlinear inhibition model. The values of n and m were inhibition constants of methane production rate and ultimate methane yield, respectively. The values of n and m were 4.9 and 0.6 on swine and 1.1 and 0.4 on cattle. The methane production rate was responded sensitively by increase and decrease of substrate concentration, whereas ultimate methane yield do not relatively. From a relation between n and m, inhibitory effect of substrate concentration was confirmed as uncompetitive inhibition.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2008

Magnetotelluric (MT) methods are widely applied as an effective exploration technique to geothermal surveys. Two-dimensional (2-D) analysis is frequently used to investigate a complicated subsurface structure in a geothermal region. A 2-D finite-element method (FEM) is usually applied to the MT analysis, but we must pay attention to the accuracy of so-called auxiliary fields. Rodi (1976) proposed an algorithm of improving the accuracy of auxiliary fields, and named it as the MOM method. Because it introduces zeros into the diagonal elements of coefficient matrix of the FEM total equation, a pivoting procedure applied to the symmetrical band matrix makes the numerical solution far less efficient. The MOM method was devised mainly for the inversion analysis, in which partial derivatives of both electric and magnetic fields with respect to model parameters are required. In the case of forward modeling, however, we do not have to resort to the MOM method; there is no need of modifying the coefficient matrix, and the auxiliary fields can be elicited from the regular FEM solution. The computational efficiency of the MOM method, however, can be greatly improved through a sophisticated rearrangement of the total equation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.69-72
• /
• 2003

This paper describes the information for the difference between two-term and multi-term approximation of the Boltzmann. In previous paper, we calculated the electron transport coefficients in pure Oxygen and Argon gases by using two-term approximation of Boltzmann equation. Therefore, in this paper, we calculated the electron transport coefficients(W and $N{\cdot}D_L$) in pure Oxygen and Argon gases for range of E/N values from 0.01~500[Td] at the temperature was 300[K] and pressure was 1[Torr] by using multi-term approximation of the Boltzmann equation by Robson and Ness, The results of two-term and multi-term approximation of the Boltzmann equation has been compared with the experimental data for a range of E/N.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1161-1163
• /
• 1999

This paper presents the new unified power flow controller(UPFC) steady-state model. This is derived from UPFC bus power equations of UPFC Synchronous voltage source model. This is very simple and exact model. This can easily be incorporated in a load flow Program, which is suited for monitoring the Power system state as well as determining the magnitude and phase angle of UPFC serial voltage source.