• KSBB Journal
• /
• v.9 no.5
• /
• pp.443-449
• /
• 1994

Fermentation characteristics of Kluyveromyces fragilis CBS 1555 with Jerusalem artichoke juice, in extractive ethanol fermentation in aqueous two phase systems composed of polyethylene glycol 20000 (PEG) and crude dextran(Dx), were investigated as a function of initial sugar concentrations, concentrations of ethanol formed, or fermentation time. Both specific ethanol production rate increased with decrease in concentrations of PEG and Dx in two-phase systems. Without being related to the compositions of aqueous two-phase system, maximum specific cell growth rate and maximum specific ethanol production rate were showed in the initial sugar concentration fo $80g/\ell$ and $120g/\ell$, respectively. The inhibition effects of ethanol on specific cell growth rate and specific ethanol production rate decreased with decrease in PEG concentration and in the range of 2.5 to 5% Dx. Specific cell growth rate and specific ethanol production rate was fitted as an exponential function and a hyperbolic function, respectively, of the concentrations of ethanol formed. Overall ethanol productivity increased with increase in initial sugar concentrations, and also the required time for the maximum productivity was so. Ethanol production rate by the elapsed fermentation time showed the maximum value in the initial sugar concentration of $160g/\ell$.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.179-184
• /
• 2016

In this work, the influence of milled carbon fiber direction on mechanical properties of milled carbon fibers/carbon blacks/natural rubber compounds was investigated. The compounds were prepared by adding the 6 phr milled carbon fibers (MCFs) and 40 phr carbon blacks (CBs) into the natural rubber. The MCFs were aligned in a parallel and orthogonal direction in the compounds using two-roll-mill machine. Mechanical properties of compounds were studied by tensile characteristics and tearing strength. As a result, the compounds showed higher tensile strength, 100%~300% modulus, and tearing strength than those of using any other compounds due to the aligning MCFs in parallel. Mechanical properties of the compounds reinforced with non-aligned MCFs were inferior to those of others. Consequently, the parallel aligned MCFs in the compounds led to an increase of tensile properties and improvement of tearing strength, resulted from MCFs with the high elastic modulus.

• The korean journal of orthodontics
• /
• v.46 no.2
• /
• pp.73-80
• /
• 2016

Objective: The purpose of this study was to investigate the static (SFF) and kinetic frictional forces (KFF) in sliding mechanics of hybrid bracket systems that involve placing a conventional bracket (CB) or active self-ligating bracket (ASLB) on the maxillary anterior teeth (MXAT) and a passive SLB (PSLB) on the maxillary posterior teeth (MXPT). Methods: The samples consisted of two thoroughbred types (group 1, anterior-CB + posterior-CB; group 2, anterior-ASLB + posterior-ASLB) and four hybrid types (group 3, anterior-CB + posterior-PSLB-type 1; group 4, anterior-CB + posterior-PSLB-type 2; group 5, anterior-ASLB + posterior-PSLB-type 1; group 6, anterior-ASLB + posterior-PSLB-type 2) (n = 13 per group). After maxillary dentition alignment and maxillary first premolars removal in the stereolithographically-made typodont system, a $0.019{\times}0.025$-inch stainless steel wire was drawn through the right quadrant of the maxillary arch at 0.5 mm/min for 5 min. The SFF and KFF were measured with a mechanical testing machine and statistical analyses were performed. Results: Four different categories of SFF and KFF were observed among all groups (all p < 0.001). Group 1 demonstrated the highest SFF and KFF; groups 4 and 3 were second and third highest, respectively. The fourth category included groups 2, 5, and 6. Placing PSLBs on the MXPT resulted in significant SFF and KFF reductions in cases with CBs on the MXAT, but not in cases with ASLBs on the MXAT. Conclusions: These data might aid in the development of a hybrid bracket system that enables low-friction sliding of an archwire through the MXPT.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.42-51
• /
• 2017

Measuring and evaluating project progress and performance are the key element of the construction project success. Construction progress is typically measured quantitatively by evaluating cost and time allocated to the project deliverable, and thus properly integrating cost and time is essential to the project management. This research was performed to propose an alternative methodology to integrate the cost and time and provide a framework for the progress measurement. The researchers developed a typical work process for the cost and schedule planning and also developed an alternative cost-schedule integration method by using progress integration units (PIU). A discipline of a construction phase served as a common level for WBS and CBS integration, so the PIUs'were defined under discipline. A case study project was selected to validate the developed methodology. The result showed the proposed method improved efficiency of cost and time integration. The result also showed the excluding material for the progress measurement purpose significantly reduced the bias of progress measurement.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.321-332
• /
• 2013

Costs and expenses are intertwined and incurred throughout an entire construction project, even from the pre-construction phase, and each phase has a different impact on the life cycle cost (LCC). However, the cost breakdown structure (CBS) is different in each phase of a building construction project, which makes it hard to reasonably calculate construction cost. For this reason, the boundary conditions were analyzed in this study based on the life cycle cost break structure (LCCBS). In addition, breakdown factors were analyzed based on the boundary conditions to derive a linkage method. The validity of the linkage method was verified through application to actual construction projects. Through the analysis, it was found that the problem of items being left out was reduced by more than 97.2 percent, and the work was done an average of 6 hours faster compared to the conventional method. It is expected that by applying the new LCC system, LCC will be both reduced and calculated in a more efficient manner.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4748-4765
• /
• 2016

We consider a virtualized cognitive radio (CR) network, where multiple virtual network operators (VNOs) who own different virtual cognitive base stations (VCBSs) share the same physical CBS (PCBS) which is owned by an infrastructure provider (InP), sharing the spectrum with the primary user (PU). The uplink scenario is considered where the secondary users (SUs) transmit to the VCBSs. The PU is protected by constraining the interference power from the SUs. Such constraint is applied by the InP through pricing the interference. A Stackelberg game is formulated to jointly maximize the revenue of the InP and the individual utilities of the VNOs, and then the Stackelberg equilibrium is investigated. Specifically, the optimal interference price and channel allocation for the VNOs to maximize the revenue of the InP and the optimal power allocation for the SUs to maximize the individual utilities of the VNOs are derived. In addition, a low‐complexity ±‐optimal solution is also proposed for obtaining the interference price and channel allocation for the VNOs. Simulations are provided to verify the proposed strategies. It is shown that the proposed strategies are effective in resource allocation and the ±‐optimal strategy achieves practically the same performance as the optimal strategy can achieve. It is also shown that the InP will not benefit from a large interference power limit, and selecting VNOs with higher unit rate utility gain to share the resources of the InP is beneficial to both the InP and the VNOs.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.29-29
• /
• 2014

Since Darwin and Wallace introduced the concept on the evolution of species, scientists have been furiously debating what species are, and how to define them. This basic yet intriguing question has bothered us ever since, as communicating to fellow biologists about fungal species is the very cornerstone of mycology. For the species presently known, this has largely been accomplished via Latin binomials linked to morphology in the absence of DNA barcodes. In recent years mycologists have embraced the ribosomal ITS as official barcode region for Fungi, and this locus is also mainly used in environmental pyrosequencing studies. Furthermore, DNA data can now also be used to describe sterile species in the absence or lack of distinct morphological structures. Recent developments such as the registration of names in MycoBank, and linking the phenotype to the genotype, have significantly changed the face of fungal systematics. By employing the Consolidated Species Concept, incorporating genealogical concordance, ecology and morphology, robust species recognition is now possible. Several international initiatives have since built on these developments, such as the DNA barcoding of holdings of Biological Resource Centres, followed by the Genera of Fungi Project, aiming to recollect, and epitypify all type species of all genera. What these data have revealed, is that most genera are poly- and paraphyletic, and that morphological species normally encompass several genetic entities, which may be cryptic species. Once we provide a stable genetic backbone capturing our existing knowledge of the past 250 years, we will be able to accommodate novelties obtained via environmental sequencing platforms. Being able to communicate these species to other biologists in a clear manner that is DNA-based, will enable scientists to elucidate the importance, role and ecological interactions that these fungi have on our planet.

• Journal of Industrial Convergence
• /
• v.18 no.5
• /
• pp.1-13
• /
• 2020

The purpose of this study is to find out how much the investment effect of convertible bond(CB) is from the perspective of investors and to present efficient investment plans to investors. The research method is to investigate the coupon interest rate, maturity interest rate, conversion price, etc. for CBs. As a result of the study, it was analyzed that CB's investment efficiency was low because the conversion price excess days ratio was only about 1/4 of the conversion date. The conversion day yield was -6.3% and the maturity day yield was -5.2% on average. It was analyzed that the number of stocks with negative conversion day yield was 2.4 times higher than the number of positive stocks and 3.7 times higher than the number of positive stocks with a maturity day yield, so the expected return on equity conversion of CB was low.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.830-834
• /
• 2003

The optimal condition for the production and extraction of monacolin K was reported. HPLC was used to determine monacolin K a kind of metabolite of Monascus from red-koji made of Monascus purpureus CBS 281.34. After culturing Monascus in solid and liquid media at $30^{\circ}C$ for 10 days, each of these were inoculated with soybean, wheat, barley, waxy rice, and rice and cultivated at $30^{\circ}C$ for 11 days. The production of monacolin K was the highest(0.35g/100g) when cultured with rice. The yield of monacolin K in red-koji increased with drying temperature and time according to the removal of water. Considering monacolin K content and the degree of death of Monascus, red-koji was dried at $80^{\circ}C$ for 60 min. Although monacolin K in red-koji was mostly extracted by 80% ethanol, there was no difference in monacolin K between shaking for 1 min and extraction for $0{\sim}24$ hr after sonication for 7 min. The extracted yield of monacolin K was the highest when the ratio of red-koji and 80% ethanol was 1:9. Moreover, the production of monacolin K appeared to be parallel with that of the pigment.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.2
• /
• pp.83-89
• /
• 2010

In this study, we studied whether hydrogen sulfide ($H_2S$) has an effect on the pacemaker activity of interstitial cells of Cajal (ICC), in the small intestine of mice. The actions of $H_2S$ on pacemaker activity were investigated using whole-cell patch-clamp technique, intracellular $Ca^{2+}$ analysis at $30^{\circ}C$ and RT-PCR in cultured mouse intestinal ICC. Exogenously applied sodium hydrogen sulfide (NaHS), a donor of hydrogen sulfide, caused a slight tonic inward current on pacemaker activity in ICC at low concentrations (50 and $100{\mu}m$), but at high concentration ($500{\mu}m$ and 1 mM) it seemed to cause light tonic inward currents and then inhibited pacemaker amplitude and pacemaker frequency, and also an increase in the resting currents in the outward direction. Glibenclamide or other potassium channel blockers (TEA, $BaCl_2$, apamin or 4-aminopydirine) did not have an effect on NaHS-induced action in ICC. The exogenous application of carbonilcyanide p-triflouromethoxyphenylhydrazone (FCCP) and thapsigargin also inhibited the pacemaker activity of ICC as NaHS. Also, we found NaHS inhibited the spontaneous intracellular $Ca^{2+}$ ($[Ca^{2+}]_i$) oscillations in cultured ICC. In doing an RT-PCR experiment, we found that ICC enriched population lacked mRNA for both CSE and CBS, but was prominently detected in unsorted muscle. In conclusion, $H_2S$ inhibited the pacemaker activity of ICC by modulating intracellular $Ca^{2+}$. These results can serve as evidence of the physiological action of $H_2S$ as acting on the ICC in gastrointestinal (GI) motility.