• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.204-215
• /
• 2008

Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

• Korean Journal of Cognitive Science
• /
• v.9 no.1
• /
• pp.31-39
• /
• 1998

This paper describes an electronic performance support system called HELPS(Handler Electronic Learning Performence Support) for semiconductor testing e equipment. The purpose of this system is to improve productivity of operators by providing just-in-time, on-the-job, mutimedia-based system information for operational support, training, and knowledge-based trouble shooting and repair. HELPS is composed of a operation module and a trouble shooting module. The operation module uses multimedia and hypermedia to provide the detailed and easily accessible information about equipment to users. Multimedia incorporate multiple. media forms including still and video images. animations 'texts' graphics. and audio. Hypermedia a are provided through a hierarchical information structure which offers not only specific information which is needed to perform a task to experienced operators. but detailed system guidance and information to novice operators. The trouble shooting module is composed of an integrated mutimedia-supported expert system which assists operators in trouble shooting and equipment repair. After diagnosis through the use of the expert system. multimedia advice is presented to the user in either still images with text or motion sequences with sound HELPS is evaluated in term of training time and trouble shooting and repair time. It improved productivity by saving more than 30% of the total time used without the system. This s system has the potential to improve productivity when it is used with ICAIOntellignet Computer Aided Instruction) and virtual reality.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.189-193
• /
• 2001

This paper analyses the tool switching problem in the dynamic environment, where parts to be processed on a flexible machine arrive randomly. As the total number of tools required to Process a set of parts on the machine is generally larger than the available magazine storage capacity, tool switches between parts are usually necessary. We assume that tool switching must be made just before the processing of the parts. Since the time required for tool switches can be significant relative to processing time and cause the processing of parts to be delayed, it is desirable to minimize the number of tool switches. Therefore, we present one heuristic algorithm to minimize the total number of tool switches and the t)reposed heuristic is compared with the KTNS (Keep Tool Needed Soonest) policy on randomly generated problems.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.22.1-22.1
• /
• 2008

Media company is not a business which sells news and information but a company sells audience's attention. Advertisers estimate audience's quantity and quality which pay attention to media and pay the cost. Thus drawing audience's attention is a natural and instinctive behavior for survival of media company. News doesn't deliver the fact just as it. That's impossible. News is a commodity made by processing and selection of the media company and journalist. On the process, judge of values is involved and limitation of time and place of media is considered. If scientists understand media's character truly, their misunderstanding about media company and journalist may be cleared up. In this society, media is not a being to ignore, particularly for big science like space science which spends huge public capital. Nowadays, space science meets the time to take the leap in Korea. However that can be crisis cause of uncertainty of science activity. When the crisis which no one desires happens, preparation needs for new opportunity. We can take the crisis as a chance. Understanding about media and public will be the first step for this preparation.

• Korean Journal of Clinical Pharmacy
• /
• v.20 no.3
• /
• pp.242-247
• /
• 2010

Controlling inappropriate antibiotics prescribing for acute upper respiratory infections(URI) is a very important for prudent use of antibiotics and resistance control. Health Insurance Review and Assessment Service (HIRA) introduced Prescribing Evaluation Program and publicly reported antibiotics prescribing rate for URI of each health institution. We performed segmented regression analysis of interrupted time series to estimate the effect of public report on antibiotics prescribing rate using national health insurance claims data. The results indicate that just before the public report period, clinics' monthly antibiotics prescribing rate for URI was 66.7%. Right after the public report, the estimated antibiotics prescribing rate dropped abruptly by 12.3%p. There was no significant changes in month-to-month trend in the prescribing rate before and after the intervention.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1602-1607
• /
• 2003

Vibration causes noise and sometimes makes structure unstable. Especially, due to the efforts of lightening, deformation of flexible structure is increased in its shape. Just a little disturbance can cause vibration and low damping ratio makes residual vibration last long time. This research is concerned with the model reference neuro-controller design for the vibration suppression of smart structures. By using a model reference neurocontroller, which is one of the algorithms of adaptive control, we performed an adaptive control of flexible cantilever plate and opened box structure with piezoelectric materials. The proposed adaptive vibration control algorithm, a model reference neuro-controller, was proved in its effectiveness by applying to an opened box structure. The model reference neuro-controller is implemented with DSP, and the real-time adaptive vibration control experiment results confirm that the model reference neuro-controller is reliable.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.943-947
• /
• 2014

Recently, a new method for reconstructing a forced nonlinear dynamic system has been proposed; specifically, the simultaneous reconstruction of its excitation as well as restoring characteristics of the system. The reconstruction was just theoretically shown to be possible by measuring the system's responses, based on newly introduced notions, a J-function and a zero-crossing time. However, numerically in the current paper, we are to reconstruct a linear system, i.e., we focus on numerical experiments to reconstruct both the excitation and the linear restoring characteristic of a linear forced oscillating system by using response data, based on the J-function and the zero-crossing time.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.134-139
• /
• 2006

Partial nitirification and denitrification process has been reported to be technically feasible and economically favorable, especially for wastewater treatment with high ammonium concentration or low Carbon/Nitrogen ratio. This research was performed to survey nitrite accumulation by nitritation in treating ADEPT effluent of piggery wastewater, which contains highly concentrated ammonia. To estimate the possibility of nitrite accumulation, DO concentration and SRT were investigated as key operational parameters. This result proved that nitritation to nitrite was steadily obtained under short sludge retention time. Oxygen limitation was proved to be just a subsidiary parameter. Energy efficiency of nitritation-denitritation process was higher than complete nitrification-denitrification because external carbon requirement for denitritation could be saved. Though the influent contained significant nonbiodegradable organic substrate, total nitrogen removal efficiency was more than 51% in nitritation-denitritation system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.97-100
• /
• 2008

Commerce has been taking a part of important on composing structure and system, having been started with simple role on exchange goods. In this point, We can say that commerce is the condensation of life based on understanding human cultures. Commercial center has been changing on a form as well as a function all through the history, following the changes of society. The attentional point is that there are always entertainment factors and have the relationship with space of the building in constant The purpose of comsume is not only just for a product but also enjoy consuming time and space. Most people have concentration spending their free time city where they live. This study identify the entertainment factors for a commerce an entertainment center.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.41-54
• /
• 2019

The cinema circuit is facing a digital, network, and mobile age, which expands non-theater accessibility to movies. Application platforms are situated as the most competitive business model that provide digital content such as games, music, books, and movies. Consumers can acquire content-related information not just offline, but online as well. Therefore, item information provided by application platforms is required. The information provided by application platforms consists of richly descriptive information such as storyline summary, consumer reviews, and related articles, while non-descriptive normative information covers data such as sales ranking, release date, genre, rental or purchase cost, domestic/foreign classification, consumer rating, number of consumer ratings, film rating, and so on. In this study, we surveyed and analyzed statistically the correlation between real-time sales ranking and other comparable non-descriptive information.