• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.373-381
• /
• 2016

Before the Conference of Parties (COP) 21 of the United Nations Framework Convention on Climate Change (UNFCCC) in 2015, most parties of UNFCCC had submitted their intended nationally determined contributions (INDCs) and to achieve their voluntary targets, some parties consider using international market mechanisms. As one of such mechanisms, Japan promoted its own bilateral mechanism called Joint Crediting Mechanism (JCM). In this study, feasibility studies and projects under JCM have been analyzed by project type, sector, country and region, which could provide some implications in designing Korea's future climate policy to achieve Korea's targets of 11.7% using international market mechanism in INDC. Since 2010, JCM has promoted 542 projects and feasibility studies in 44 countries according to the Institute for Global Environmental Strategies (IGES) database. Among 542 projects, about 80% were feasibility studies implying that JCM was more focused on project identification. However, current trends of JCM show that more projects will be soon implemented based on these feasibility studies. For sectoral categorization, projects were categorized into seven sectors-energy technology, energy efficiency, renewable energy, waste management, city, strategic planning and projects related to the country's efforts to reduce emissions from deforestation and forest degradation (REDD+). JCM projects were mitigation focused with more than 70% of projects were related to energy efficiency, renewable energy and energy technology. At the regional and country level, JCM is highly focused on Asia and especially, more than 100 projects were developed in Indonesia. Based on the analysis of JCM, in order to develop bilateral international mechanism for Korea, it is worthwhile to emphasize that Korea considers Asian countries as her partner. In addition, Korea may consider the collaboration with Multilateral Development Banks (MDBs) to implement projects identified by Korea and Asian partner countries. Furthermore, strategically, it is recommendable to develop jointly with Japan who has already capacity and networks with other Asian countries to mitigate GHG emissions. Such financial resources from MDBs and Japan may contribute to meet the 11.3% of GHG reduction target from abroad according to INDC of Korea.

• Journal of Korean Theatre Studies Association
• /
• no.40
• /
• pp.401-450
• /
• 2010

This thesis purposes to suggest that creative stage directors have copyright ownership and we make them create high-quality of theatre direction. Stage directors are sincere creator of the theatre stage today. We have little judicial precedents about stage directors, no artistic examination related directing. Stage directors are performers who have neighboring rights, there is a problem that they won't have the exclusive right of making derivative works in this country. Others will make creation (such as cinemas, animations, novels) based on stage expression without permission, because stage directors don't have exclusive right of making derivative works. Copyright law can't protect the concept of stage directors and building blocks of them which are drama text, actors and theatre space, because copyright law don't protect idea according to idea/expression dichotomy. The expression of stage direction is belong to five fundamentals which are composition, picturization, movement, rhythm, pantomimic dramatization that are come from Dean & Carra's work. Directors' work is to make theatrical works based on literary works. Therefore, theatrical works are derivative works which based on drama texts. Also, theatrical works are able to be joint works. In the case of that stage directors write drama text and create expression on the stage, they have to own authorship of both works. Merger doctrine should not apply theatre directors' works strictly like any other functional works because stage directors usually create noble expression which have been not before. We need shift of the definition of theatrical works which are derivative works or joint works to protect theatre directors' creativity. Hereafter, the special legal section for dramatic(theatrical) works including the flexible legal definition for performing arts should be established, and 'contract form' for stage directors should be made. Acting edition(literary works) should be published to grant creative directors compensation. I emphasize to grant ownership of copyright to creative stage directors, to encourage directors' works. Therefore, copyright law will be the support for development of cultural arts institutionally.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.19-28
• /
• 2018

Key factors that ensure competitiveness of modular unit include consistent high quality and connection condition that ensures high structural performance while minimizing the overall scale of the on-site process. However, it is difficult to evaluate the structural performance of the connection of modular unit, and its structural analysis and design method can be different depending on the connection to its development, which affects the seismic performance of its final design. In particular, securing the seismic performance is the key to designing modular systems of mid-to-high-rise structure. In this paper, therefore, the seismic performance of the modular system with bracket-typed fully restrained moment connections according to stiffness and the shapes of various connection members was evaluated through experimental and analytical methods. To verify the seismic performance, a cyclic loading test of the connection joint of the proposed modular system was conducted. As a result of this study, theoretical values and experimental results were compared with the initial stiffness, hysteresis behavior and maximum bending moment of the modular system. Also, the connection joint was modeled, using the commercial program ANSYS, which was then followed by finite element analysis of the system. According to the results of the experiment, the maximum resisting force of the proposed connection exceeded the theoretical parameters, which indicated that a rigid joint structural performance could be secured. These results almost satisfied the criteria for connection bending strength of special moment frame listed on KBC2016.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.386-392
• /
• 2021

Multiferroics exhibiting the coexistence and a possible coupling of ferromagnetic and ferroelectric order are attracting widespread interest in terms of academic interests and possible applications. However, room-temperature single-phase multiferroics with soft ferromagnetic and displacive ferroelectric properties are still rare owing to the contradiction in the origin of ferromagnetism and ferroelectricity. In this study, we demonstrated that sizable ferromagnetic properties are induced in the ferroelectric bismuth ferrite-barium titanate system simply by introducing Co ions into the A-site. It is noted that all modified compositions exhibit well-saturated magnetic hysteresis loops at room temperature. Especially, 70Bi_0.95Co_0.05FeO₃-30Ba_0.95Co_0.05TiO₃ manifests noticeable ferroelectric and ferromagnetic properties; the spontaneous polarization and the saturation magnetization are 42 µC/cm² and 3.6 emu/g, respectively. We expect that our methodology will be widely used in the development of perovskite-structured multiferroic oxides.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1045-1052
• /
• 2021

Modern Warfare is transforming into a Network Centric Warfare(NCW) where surveillance systems, command control systems and strike systems are interconnected with advanced IT technologies to share battlefield situations. The South Korean military is using the various tactical data links(TDL) such as Link-K, Link-16, Link-11 and KVMF depending on each military's battlefield situation. Joint Tactical Data Link System(JTDLS) is a system thar shares tactical information in near-real time between army/navy/air joint forces and additionally establishes Link-22 in Link-K, Link-16 and KVMF. In this paper, we propose the Link-22 system structure, Link-22 message analysis and the interface structure between the tactical data link processor and Link-22 to apply Link-22 to the JTDLS.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.463-476
• /
• 2022

In this paper, we propose a table tennis posture classification system using a cooperative robot to develop a table tennis robot that can be trained like a real game. The most ideal table tennis robot would be a robot with a high joint driving speed and a high degree of freedom. Therefore, in this paper, we intend to use a cooperative robot with sufficient degrees of freedom to develop a robot that can be trained like a real game. However, cooperative robots have the disadvantage of slow joint driving speed. These shortcomings are expected to be overcome through quick recognition. Therefore, in this paper, we try to quickly classify the opponent's posture to overcome the slow joint driving speed. To this end, learning about dynamic postures was conducted using image data as input, and finally, three classification models were created and comparative experiments and evaluations were performed on the designated dynamic postures. In conclusion, comparative experimental data demonstrate the highest classification accuracy and fastest classification speed in classification models using MLP (Multi-Layer Perceptron), and thus demonstrate the validity of the proposed algorithm.

• Composites Research
• /
• v.19 no.4
• /
• pp.23-30
• /
• 2006

In the development of a cryogenic propellant tank, the proper selection of adhesives to bond composite and metal liner is important for the safety of operation. In this study, 3 types of adhesives were tested for the ability to bond CFRP composites developed for cryogenic use and aluminum alloy (Al 6061-T6) for lining the tank using double-lap joint specimens. The double-lap joint specimens were tested inside an environmental chamber at room temperature and cryogenic temperature ($-150^{\circ}C$) respectively to compare the bond strength of each adhesive and fracture characteristics. The material properties with temperature of component materials of double-lap joints were measured. In addition, ABAQUS was used for the purpose of analyzing the experimental results.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.313-322
• /
• 2020

The recognition of the risk hazards is a vital step to effectively prevent accidents on a construction site. The advanced development in computer vision systems and the availability of the large visual database related to construction site made it possible to take quick action in the event of human error and disaster situations that may occur during management supervision. Therefore, it is necessary to analyze the risk factors that need to be managed at the construction site and review appropriate and effective technical methods for each risk factor. This research focuses on analyzing Occupational Safety and Health Agency (OSHA) related to risk zone identification rules that can be adopted by the image recognition technology and classify their risk factors depending on the effective technical method. Therefore, this research developed a pattern-oriented classification of OSHA rules that can employ a large scale of safety hazard recognition. This research uses joint reasoning of risk zone Identification and numeric input by utilizing a stereo camera integrated with an image detection algorithm such as (YOLOv3) and Pyramid Stereo Matching Network (PSMNet). The research result identifies risk zones and raises alarm if a target object enters this zone. It also determines numerical information of a target, which recognizes the length, spacing, and angle of the target. Applying image detection joint logic algorithms might leverage the speed and accuracy of hazard detection due to merging more than one factor to prevent accidents in the job site.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.4
• /
• pp.139-159
• /
• 2023

This study was conducted to review the feasibility of establishing a joint preservation library centered on the Chungcheongbuk-do Office of Education. To achieve this, a survey and perception survey were conducted. The research results suggest the following: Firstly, the functions of the Chungcheongbuk-do Office of Education joint preservation library should focus on the preservation of valuable materials, the development of Chungcheongbuk-do educational and school-specialized materials, and prioritizing the digitalization of important transferred materials and providing services to the general public. Secondly, when determining the criteria for materials to be transferred in the future, priority should be given to materials that require preservation in their original form and those that need media conversion. Thirdly, when considering the types of materials to be transferred in the future, the operational plan should primarily focus on monographs but also consider other types of materials. Fourthly, regarding ownership rights of materials during the transfer process, it is advisable to establish detailed transfer guidelines, including ownership rights, through discussions between the Chungcheongbuk-do Office of Education and individual libraries via the Joint Preservation Library Operating Committee.

• Journal of radiological science and technology
• /
• v.47 no.2
• /
• pp.87-95
• /
• 2024

Most knee axial radiographs, known as sunrise and skyline view, were performed with the patient in the prone position. The authors tried to address some of the shortcomings of conventional radiography by developing a new radiography method, K-RAD. According to previous research, the K-RAD method showed a wider patellar-femoral joint space than conventional radiography and provided a clear patellar hemi-lateral image with a constant gap between the femoral trochlear groove and tibial tuberosity. The authors worked with an orthopedic specialist to perform radiography using the K-RAD method rather than using existing methods, and as a result, the two knees were aligned correctly and a clear image of the patellar-femoral joint space was created. The authors propose the K-RAD method for knee axial radiography because the K-RAD method provides a sense of stability to the patient and provides images with high diagnostic value.