• Journal of Digital Convergence
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2024

The purpose of this study is to verify whether companies residing in industry-academic convergence zones designated by the government are achieving policy goals and to seek policy implications and directions for improvement through analysis. For the study, business activities targeting resident companies were divided into infrastructure, business content, management, and system aspects, and business performance indicators, resident company satisfaction surveys, and differences in sales increase between resident companies and non-resident companies were analyzed through t-test. Based on statistical analysis results, performance indicators, and corporate survey analysis results, we track joint industry-academia R&D projects to maximize the effectiveness for companies, develop and operate human resources management for teams, and provide financial support for ordinances of metropolitan local governments. Improvements such as stipulation, antenna facilities at the corporate research center, and improvement of the researcher's residential environment were suggested. This study is the first to quantitatively verify policy performance targeting companies residing in industry-academic convergence zones, a large-scale government project, and future follow-up research is needed, including analysis of policy effects based on various variables such as employment indicators and corporate financial indicators.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.433-449
• /
• 2012

An experimental investigation was conducted to study the behavior of RC wide beam-column joints with slab subjected to reversed cyclic loads under constant axial load. Six half scale interior wide beam-column assemblies representing a portion of a frame subjected to simulated seismic loading were tested, including three specimens without slab and three specimens with slab. The primary variables were the ratio of column-to-beam flexural capacity ($M_r={\Sigma}M_c/{\Sigma}M_b$ ; 0.77~2.26), ratio of the column-to-beam width (b/H ; 1.54, 1.67). Test results are shown that (1) the current design code and practice for interior joints(type 2) are apply to the wide beam-high strength concrete column. (2) the presence of a slab have an effect on the performance of the wide beam-high strength concrete column interior joints(type 2). therefore in the design of the wide beam-high strength concrete column interior joints(type 2), the width of slab effective as a T beam flange should be considered. It was show that the case of the ratio of column-to-beam flexural capacity is more than 2.0, the effective width of slab are 2 times of an effective depth of wide beam, however if the ratio of column-to-beam flexural capacity is 1.4~2.0, the effective width of slab are not able to be considered.

• Journal of Nutrition and Health
• /
• v.56 no.3
• /
• pp.231-246
• /
• 2023

Purpose: The aim of this study was to investigate the anti-osteoarthritic effect of the ethanol extract of Boswellia serrata gum resin (FJH-UBS) enriched with keto-β-boswellic acid and 3-O-acetyl-11-keto-β-boswellic acid compared to the conventional Boswellia serrata extract by adding the process of removing oil with hexane, in the monosodium iodoacetate (MIA)-induced osteoarthritis rat model. Methods: Sprague-Dawley (SD) rats were orally administered 0, 40, or 80 mg of FJH-UBS/kg body weight (BW)/day for 5 weeks and injected with MIA intra-articularly into right knee joints on day 15 to induce osteoarthritis. Changes in the knee joint microarchitecture, cartilage degradation, the expression of inflammatory mediators, cytokines, and matrix metalloproteinases (MMPs) in serum and synovia were observed. Results: Oral administration of FJH-UBS (80 mg/kg BW/day) reduced MIA-induced knee swelling and cartilage degradation and increased the expression of type II collagen and aggrecan in articular cartilage. Furthermore, FJH-UBS administration reduced MIA-induced increases in the serum levels of prostaglandin E2, leukotriene B4, interleukin (IL)-1β, IL-6, and MMP-13, and MIA-induced increases in the mRNA expressions of inducible nitric oxide synthase, cyclooxygenase-2, 5-lipoxygenase, IL-1β, IL-6, TNF-α, MMP-2, MMP-9, and MMP-13 in the synovia of knee joints. Conclusion: These results indicate that FJH-UBS exerts its anti-osteoarthritic effects by suppressing the expressions of inflammatory cytokines and MMPs and, thus, cartilage degradation. Furthermore, they suggest that FJH-UBS has potential use as a functional food that improves joint and cartilage health.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.33-43
• /
• 2019

Link-16 is a data link that provides joint interoperability to the US Navy, Air Force and NATO. Currently, the military relies entirely on foreign SW and tools for test environment, tactical simulation training and interoperability verification test for Link-16 operation. Therefore, it is necessary to develop Link-16 based operation environment test tool. In this paper, Link-16 network operational performance analysis simulator was developed by analyzing the function of Link-16 foreign tools. It also implements the SIMPLE standard interface for interworking with foreign SW and tools. The functional model for Link-16 network operation performance analysis consists of pre-analysis, real-time operational analysis, and post-analysis functional model. Each functional model test was performed through SIMPLE interworking with foreign SW and tools. Link-16 network operation performance analysis If we replace foreign SW through simulator, we can perform tactical training, network design verification and operation (scenario) verification for our military.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.835-850
• /
• 2018

The dramatic improvements in the growth rate and breast muscle size and yield in broilers through the intensive genetic selection, and the improvement in nutrition and management over the past 50 years have introduced serious abnormalities that influenced the quality of breast meat. The abnormalities include pale-soft-exudative (PSE) conditions, deep pectoral muscle (DPM) myopathy, spaghetti meat (SM), white striping (WS), and woody breast (WB) that have serious negative implications to the broiler meat industry. The incidences of PSE and DPM have been known for several decades, and their prevalence, etiology and economic impact have been well discussed. However, other abnormalities such as SM, WS and WB conditions have been reported just for few years although these conditions have been known for some time. The newly emerging quality issues in broilers are mainly associated with the Pectoralis major muscles, and the incidences have been increased dramatically in some regions of the world in recent years. As high as 90% of the broilers are affected by the abnormalities, which are expected to cause from $200 million to $1 billion economic losses to the U.S. poultry industry per year. So, this review mainly discusses the histopathological characteristics and biochemical changes in the breast muscles with the emphasis on the newly emerging abnormalities (SM, WS, and WB) although other abnormalities are also discussed. The impacts of the anomalies on the nutritional, functional, mechanical and sensory quality of the meat and their implications to the poultry industry are discussed.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.47-57
• /
• 2020

In Floating PV (Photovoltaic) systems, PV modules are installed on water by utilizing the surface of idle water such as a reservoir and multipurpose dam. A floating PV system, therefore, has the advantage of efficiency in national land use and improved energy yield owing to cooling effect compared to on-land PV systems. Owing to the limitation of installation environment for a floating PV system, the system, however, has the disadvantage of an increase in transmission distance of DC (Direct current) cables. A longer transmission distance of a DC cable results in greater power loss due to a voltage drop. This leads to a decline in economic feasibility for the floating PV system. In this paper, the economic analysis for 10 floating PV systems installed in a reservoir has been conducted in terms of a change in annual power sales according to the variation of transmission losses depending on the factors affecting the voltage drop, such as transmission distance, cross-section area of underwater cable, the presence of joint box, and PV capacity.

• Journal of Biosystems Engineering
• /
• v.35 no.1
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• Journal of the Korean association of regional geographers
• /
• v.18 no.4
• /
• pp.388-399
• /
• 2012

Jinju City has been often called as the largest agglomeration of the silk industry in Korea. However Jinju's silk industry has experienced a continuous decline in employment and to production outputs after the late 1980s. This paper aims to explore innovation capacities of Jinju's silk industry and evaluate the government policy to promote the competitiveness of the silk industry in Jinju. The main findings are as follows. First, the survey shows that the major sources of innovation tend to come from customer firms in the Capital area and the innovation supporting agency and universities in Jinju City. Second, local silk production firms tend to by and large evaluate that the industrial policy projects to promote the competitiveness of Jinju's silk industry have been successful, particularly in terms of a joint branding project and the marketing support program.

• The Journal of Korean Medicine
• /
• v.37 no.3
• /
• pp.97-111
• /
• 2016

Objectives: This study aims to investigate the policy status of traditional medicine standardization between Korea and China as well as to derive a strategic development plan for Korean medicine standardization. Methods: The existing national plans and preceding studies on traditional medicine standardization in Korea and China were reviewed, and scope of the study was categorized as having three main aspects: infrastructure; standard development and standardization activities; and application and diffusion. Results: Nine development plans for Korean medicine standardization derived under the study were as follows: With regard to infrastructure of standardization, 1) standardization plan of Korean medicine shall be established based on involvement of multi-government ministries. 2) It shall be set with a consistent cooperation process among standardization-related organizations, as well as 3) encourage the industry to participate in standardization activities. To activate standards development, 4) launching the R&D-standardization-industrialization linked project, 5) supporting Korean medicine society and the mirror committee for motivation, and 6) planning the international joint research for development of standard and expanding standardization activities are recommended. In the aspect of application, there is a need for 7) expanding certification systems for the industry and 8) evaluation and feedback on the life-cycle of standardization. Lastly, 9) educational programs for training experts of standardization shall be developed and implemented. Conclusions: In order to invigorate standardization activities for Korean medicine, enhancement of planning and evaluation capacity, ensuring the strategic development of standards, broadening boundaries of international standardization activities, and training professionals are required.

• Journal of the military operations research society of Korea
• /
• v.3 no.2
• /
• pp.49-77
• /
• 1977

Weapon systems are curcial instruments for the security of a nation and critical elements for the victory in a war. Since modern weapon systems tend to be capital-intensive with high precision and quality, they become more and more complex and diversified; their acquisition costs become huge; and their technological obsolescence becomes accelerated. Therefore, the systematic management of weapon acquisition process would be one of the most important defense tasks at the national level. To analyze such problems and find solutions, this paper has studied various aspects related to the efficient management of weapon system acquisition. After brief summarization of the general characteristics of weapon systems, their effectiveness, and developmental trend, the paper discusses the defense management policies and techniques for the weapon systems. Specifically, four alternative acquisition methods such as indigenous R & D, foreign purchase, co-production and joint-production are discussed and analyzed by systems approach. The systems analysis procedure to evaluate and select weapon acquisition method is as follows; 1) to analyze the merits and demerits of the alternative methods, 2) to screen unrealistic alternatives through the consideration of significant factors such as political, economic, military, technological, and social constraints, 3) to evaluate and select an optimal one among the remaining acquisition methods after the cost-effectivenss analysis. For the base of cost-effectivess analysis, cost analysis model as well as effectiveness analysis model of each acquisition method are developed.