• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.209-216
• /
• 2017

One of the important considerations in structural designing the flat plate system is ensuring the resistance to punching shear caused by axial loads and the ductile ability to follow horizontal deformation under earthquake. In this study, the ECC (Engineered Cementitious Composite) has been placed in the critical section zone of punching shear at slab-column joint to improve ductility and the advanced details of shear reinforced area nearby critical section zone has been developed using stud and steel fiber. The shear performance tests were performed on the specimens with parameters of fiber type mixed with ECC, stud and steel fiber set into the shear reinforced area in which the failure pattern, joint strength, displacement and strain of the specimen were compared and analyzed. The test results showed that the strength and ductility of specimens with ECC applied to joint were better than those of RC flat plate system. Also, the shear reinforcement effect of stud and the ductility improvement of steel fiber concrete were confirmed in the shear reinforcement area.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.441-447
• /
• 2017

Objective : Computed tomography (CT)-based method of three dimensional (3D) analysis ($MIMICS^{(R)}$, Materialise, Leuven, Belgium) is reported as very useful software for evaluation of OPLL, but its reliability and reproducibility are obscure. This study was conducted to evaluate the accuracy of $MIMICS^{(R)}$ system, and inter- and intra-observer reliability in the measurement of OPLL. Methods : Three neurosurgeons independently analyzed the randomly selected 10 OPLL cases with medical image processing software ($MIMICS^{(R)}$) which create 3D model with Digital Imaging and Communication in Medicine (DICOM) data from CT images after brief explanation was given to examiners before the image construction steps. To assess the reliability of inter- and intra-examiner intraclass correlation coefficient (ICC), 3 examiners measured 4 parameters (volume, length, width, and length) in 10 cases 2 times with 1-week interval. Results : The inter-examiner ICCs among 3 examiners were 0.996 (95% confidence interval [CI], 0.987-0.999) for volume measurement, 0.973 (95% CI, 0.907-0.978) for thickness, 0.969 (95% CI, 0.895-0.993) for width, and 0.995 (95% CI, 0.983-0.999) for length. The intra-examiner ICCs were 0.994 (range, 0.991-0.996) for volume, 0.996 (range, 0.944-0.998) for length, 0.930 (range, 0.873-0.947) for width, and 0.987 (range, 0.985-0.995) for length. Conclusion : The medical image processing software ($MIMICS^{(R)}$) provided detailed quantification OPLL volume with minimal error of inter- and intra-observer reliability in the measurement of OPLL.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.17-22
• /
• 2018

In this paper, the effects of solder joint aging on the reliability of embedded package solder joints were investigated using numerical analysis by finite element method. Solder joints were SAC305 with aging time 0, 60, 180 days. For reliability analysis, warpage of package and equivalent creep strain (ECS) and total strain energy density (TSED) of solder joint were analyzed. The analysis results show that the package warpage is decreased in the case of the embedded package compared to the non embedded package, and the reliability life of the solder joint is predicted to be high. Also, it was interpreted that the longer the aging time, the less the warpage of the embedded package, but the reliability life of the solder joint would be shortened.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1673-1682
• /
• 2013

Citrobacter sp. is a cause of significant opportunistic nosocomial infection and is frequently found in human and animal feces, soil, and sewage water, and even in industrial waste or putrefaction. Biofilm formation is an important virulence trait of Citrobacter sp. pathogens but the process and characteristics of this formation are unclear. Therefore, we employed in vitro assays to study the nutritional and environmental parameters that might influence biofilm formation of C. werkmanii BF-6 using 96-well microtiter plates. In addition, we detected the relative transcript levels of biofilm formation genes by RT-PCR. Our results indicated that the capacity of C. werkmanii BF-6 to form biofilms was affected by culture temperature, media, time, pH, and the osmotic agents glucose, sucrose, NaCl, and KCl. Confocal laser scanning microscopy results illustrated that the structure of biofilms and extracellular polysaccharide was influenced by 100 mM NaCl or 100 mM KCl. In addition, nine biofilm formation genes (bsmA, bssR, bssS, csgD, csgE, csgF, mrkA, mrkB, and mrkE) were found to contribute to planktonic and biofilm growth. Our data suggest that biofilm formation by C. werkmanii BF-6 is affected by nutritional and environmental factors, which could pave the way to the prevention and elimination of biofilm formation using proper strategies.

• Journal of muscle and joint health
• /
• v.11 no.2
• /
• pp.187-198
• /
• 2004

Purpose: The purpose of this study was to identify differences of BMI, pain, depression, self-esteem and self-efficacy between rheumatoid arthritis and osteoarthritis patients. Method: The study subjects were 135 persons having chronic arthritis at rheumatology clinic and the department of orthopedic surgery of the C university hospital in D city. The data were collected from February 19th to April 7th, 2003. The data analysis consisted of $X^{2}-test$, t-test, Pearson Correlation Coefficient, and multiple regression using SPSSWIN 10.0 program. Result: 1. There were significant differences in age(p=0.000), occupation(p=0.015), marriage(p=0.028), duration of illness(p=0.000), BMI(p=0.006) and Self-efficacy(p=0.017) between rheumatoid arthritis and osteoarthritis patients. 2. In rheumatoid arthritis, the BMI and self-esteem(r=-0.239, p=0.05) were significantly correlated and also pain and self-esteem(r=-0.402, p=0.01), pain and self-efficacy(r=-0.455, p=0.01) were significantly negatively correlated. The self-esteem and depression(r=-0.622, p=0.01), self-efficacy and depression(r=-0.729, p=0.01) were significantly negatively correlated and also pain and depression(r=0.432, p=0.01), self-esteem and self-efficacy(r=-0.476, p=0.01) were significantly positively correlated. In osteoarthritis, the pain and self-esteem(r=-0.225, p=0.01) were significantly negatively correlated and also pain and self-efficacy(r=-0.493, p=0.01), self-esteem and depression(r=-0.692, p=0.01), self-efficacy and depression(r=-0.566, p=0.01) were significantly negatively correlated. The pain and depression(r=0.290, p=0.05), self-esteem and self-efficacy(r=0.383, p=0.01) were significantly positively correlated. 3. The factors influenced by the self-efficacy, the depression and age in rheumatoid arthritis explained 56.2%, the depression and pain in osteoarthritis explained 43.9%. The factors influenced by the BMI, the self-esteem in rheumatoid arthritis explained 5.7%, but there was no significantly variable in osteoarthritis. Conclusion: The results support the importance of different nursing intervention focused on BMI and self-efficacy in patients with rheumatoid arthritis and osteoarthritis. There is a need for further studies to identify relation of variables in different diseases related to arthritis.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.460-470
• /
• 2017

Mussels are major fouling organisms causing serious technical and economic problems. In this study, antifouling activity towards mussel was found in three compounds isolated from a marine bacterium associated with the sea anemone Haliplanella sp. This bacterial strain, called PE2, was identified as Vibrio alginolyticus using morphology, biochemical tests, and phylogenetic analysis based on sequences of 16S rRNA and four housekeeping genes (rpoD, gyrB, rctB, and toxR). Three small-molecule compounds (indole, 3-formylindole, and cyclo (Pro-Leu)) were purified from the ethyl acetate extract of V. alginolyticus PE2 using column chromatography techniques. They all significantly inhibited byssal thread production of the green mussel Perna viridis, with $EC_{50}$ values of $24.45{\mu}g/ml$ for indole, $50.07{\mu}g/ml$ for 3-formylindole, and $49.24{\mu}g/ml$ for cyclo (Pro-Leu). Previous research on the antifouling activity of metabolites from marine bacteria towards mussels is scarce. Indole, 3-formylindole and cyclo (Pro-Leu) also exhibited antifouling activity against settlement of the barnacle Balanus albicostatus ($EC_{50}$ values of 8.84, 0.43, and $11.35{\mu}g/ml$, respectively) and the marine bacterium Pseudomonas sp. ($EC_{50}$ values of 42.68, 69.68, and $39.05{\mu}g/ml$, respectively). These results suggested that the three compounds are potentially useful for environmentally friendly mussel control and/or the development of new antifouling additives that are effective against several biofoulers.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.1
• /
• pp.68-98
• /
• 2010

This study was conducted to analyze the results of the implementation of next-generation growth engine program that was promoted across all government agencies for five years from 2004 as part of a range of initiatives aimed at expanding the nation's economic growth potential. The results were analyzed in this study using five indices: program purpose and design; strategic planning; program management; program results; and pan-governmental agency cooperation and coordination. The results of the study include the following. First, regarding program purpose and design, it was found that consistent leadership in the promotion of the programs was insufficient as the relevant program promotion systems and financial resources were dispersed among governmental agencies, even though the objectives and validity of the programs were recognized. Second, with regard to strategic planning, it was found that although the program objectives and technical development strategy had been established at the beginning of the program, they were biased toward the technical objectives and mainly implemented by the technology suppliers. Third, regarding program management, it was found that the responsibility for general administration, ranging from task planning to policy improvement, was given to the appointed program director but that the system of cooperation among the agencies was insufficient to carry out the relevant tasks. Fourth, regarding the results of the program, it was difficult to understand the results consistently as the economic objectives were not clearly presented, even though the technical objectives were achieved despite the short implementation period of the program. Fifth, with regard to pan-governmental agency cooperation and coordination, it was found that the coordination organization whose remit was to implement the program was established pursuant to the Basic Law on Science and Technology, but that no detailed regulations or guidelines on the operation of the organization were drawn up. To efficiently plan and execute future pan-governmental agency R&D programs that are similar to the next-generation new growth engine program, various requirements should be met, namely, 1) joint planning and consistent program design among governmental agencies, 2) clarification of the program objectives and budget allocation system, 3) establishment of a pan-governmental agency program operation and assessment system, 4) formulation of a strategy for linking R&D with standardization, and 5) enactment of pan-governmental agency joint operation rules.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.413-421
• /
• 2017

In this paper, we designed and fabricated a compact UHF receive module for efficient operation such as tactical and operation situation, target location information confirmation, target reset using Link-K(Korean joint tactical data link system). And the effect of target reset was analyzed by simulation. The designed module consists of UHF(ultra high frequency) receiver section, control section, and power distribution section. The UHF receiver section performs frequency down conversion, filtering and automatic gain control, etc. The control section demodulates frequency down-converted signals, extracts information, and performs external interworking. The power distribution section supplies external power, generates and supplies the power required by each section. The fabricated module was dimension of $105{\times}105{\times}80mm$ and weighed 1.10 kg and The receiving distance is more than 50 km.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.147-151
• /
• 2004

This study aims at measuring electrical and rheological properties of cosmetic emulsions on the skin under shear flow. The effects of volume ratio and surfactants on structural changes of emulsions were examined by determining the changes of electrical resistance, viscosity, and morphology. As the ratio of the internal phase increased, the phase inversion occurred more quickly. The viscosity change was found to increase with increasing of the variation of electrical resistance of the emulsions. This phenomenon may be caused by decreased resistant force against the shear flow because of the breakdown of the internal phase. Surfactants a]so played a key ro]e on phase transition of emulsions. It is likely that polymeric surfactants anchoring on the emulsion surface reinforced the interfacial mechanical strength. As the concentration of surfactants increased, the phase transition occurred more slowly. It has been demonstrated that the phase changes of emulsions under shear flow can be monitored on the real-time basis by using a JELLI$\^$TM/ chip system, a combination of conductiometry and rheometry. Our approach is expected to a useful experimental tool for predicting the phase transition of the cosmetic products during skin application.