• 근관절건강학회지
• /
• 제11권2호
• /
• pp.119-126
• /
• 2004

Purpose: The purpose of this study was to identify health problem and joint bleeding, disability according to severity in patients with hemophilia. Method: The research design was survey study for conformed severity in patients with hemophilia, health problem and bleeding of joint and degree of limitation. The subjects were 186 men in patients with hemophilia by convenience sampling. These results were analyzed statistically by frequency, percentage, t-test, chi-square. Result: 1. Health problem of severe hemophilia patients were significantly higher than moderate group(t=3.17, p=.002). A severe hemophilia patients were significantly higher than moderate group in health problem of socio-psychological, emotional, physical, interpersonal. 2. There was relation between severity and the frequency of bleeding($X^{2}=7.642$, p=.054). 3. A severe hemophilia patients were more than moderate group in disability of ankle joint(t=2.52, p=.013). Conclusion: A severe hemophilia patients has more severe problems than moderate patient in case of health problem, joint bleeding and degree of disability.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.61-72
• /
• 2004

In this paper, we design sampling inspections and service capacities simultaneously for multi-products. Particularly, we extend Kim(2003) by introducing the fixed cost of providing services. We show that, due to the fixed cost considered, the cost function of a product is no longer linear or convex in terms of the level of service provision, and the total inspection is prefered to the small level of service capacity which results in high burden of the fixed cost. And we develop a simple framework to deal with this joint design problem for a product. Also we consider the problem of allocating the given number of the total service capacities among products. A dynamic programming algorithm is developed to determine the optimal allocation which minimizes the overall total cost of the system and the optimal allocation can be obtained with the considerably smaller computations than the total number of possible allocations. The results can be used to support planning decisions and to aid the joint design of inspections and service capacities for products.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.13-16
• /
• 2002

In this research, the design methods of the rocket joint parts were suggested. In the first section, nonlinear finite element analyses for joint parts of a composite pressure tank were performed. In the analyses, the detailed finite element modeling was performed and complex boundary conditions(contact problem, clamping force) were considered. Secondly, several guidelines for the design of joint parts were suggested. The parametric study for geometric design variables was peformed. Finally, the parametric study result was categorized for the multi-Joint part design of the axi-symmetric composite structure.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.370-373
• /
• 2006

Lastly, the problem of filling occurs in the process of concealed joint of adjacent components and was seen in joints between the structure and an electrical or mechanical device. Therefore, the dry processing which replaces wet joint was seen in joints between the structure and a door, ones between the structure and a finishing materials, ones between a gypsum board and electrical device, and ones between a water pipe and a tile finishing. And a process of separating the area of jointed parts in order to eliminate the problem of overlap was seen in joints between a door and a finishing material and ones between a gypsum board on the ceiling and a light. Lastly, an analysis of a process of exposing concealed parts indicated that the problem of filling could be applied to joints between the structure and an electrical or mechanical device and ones between a finishing material and a mechanical device. This study sought out methods to apply Environment Friendly Multi Housing Remodeling that allow easy remodeling as part of environment- preserving policies. It also contains basic data useful to implement long-life houses in the future by presenting a comprehensive design standard for them

• 한국경영과학회지
• /
• 제35권1호
• /
• pp.97-109
• /
• 2010

In this paper, we study a joint design problem of sampling inspections and service capacities for multi-products. Products are supplied in batches after rectifying inspections, that is, rejected lots are 100% inspected and defective products are reworked to good ones. When supplied, all defective products are uncovered through total inspection and returned to service. By exploiting the first and second order properties of the objective function, we identify the optimal inspection policies and service capacities for individual products, and develop allocation algorithms to obtain an optimal allocation of the limited total service capacity to products with the small number of computations.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.123-137
• /
• 1998

The finite deformation with self contact problem of C. V. joint boots is analysed by using the implicit finite element code ABAQUS/Standard. It is shown that analysis results have a good agreement with experimental ones to the degree of maximum rotation angle. As an application of design modification, the effects of thickness change of the rounded part of boot model on the bending and the contact situation of deformed geometry are investigated. In this paper, the effect of the design modification in the end on the leakage is examined using 2-D finite element simulation. To solve the leakage problem of grease, the length of the small end is enlarged. From this study, it is confirmed that we can save the cost and time by applying FEM techniques to analyze and design the boot model.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.115-123
• /
• 1994

A man model can be used as an effective tool to design ergomonically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movemtn was known to be a difficult problem. To solve this redundancy problem, the psychophysical cost function can predict the arm reach posture accurately. But the joint discomfort that human feels at the joint can not be predicted since the effects of external factors on the joint discomfort is not known. In this study a psychophysical experi- ment using the magnitude estimation technique was performed to evaluate the effects of external factors such as joint, joint angle and Perceived Exertion Ratio on the joint discomfort. Results showed that the joint discomfort increased as the Perceived Exertion Ratio increased, but the relation is not linear and was affected not only by the joint but also by the joint angle for the same Perceived Exertion Ratio. The interaction effect of the joint and the joint angle was also significant. From the results it is needed to develope the cost function which can predict the joint discomfort considering the joint, joint angle and external load.

• 전산구조공학
• /
• 제11권1호
• /
• pp.161-170
• /
• 1998

길이가 긴 원통형 실린더를 구성하는 데에 사용될 조인트 부재에 대한 공차설계를 수행하였다. 즉, 원통형 실린더를 체결할 때 사용되는 조인트 부품 가운데 스터드 볼트를 최소 민감도해석에 의해 공차설계를 하였다. 조인트 부재의 공차설계를 위한 최소 민감도 해석에 의한 정식화는 목적함수가 폰 마이세스 응력의 공차에 대한 민감도이고, 여러 부등호 제약식 중에서 자중이 부등호 제안식에 포함된다. 조인트 부재의 경우 자중에 대한 타당한 부등호 제안식을 설정하기 위하여 우선 확정적인 경우에 대한 최적설계를 수행하여 그 범위값을 선정하였다. 원통형 부재의 구조 응답은 축대칭 유한요소로서 구조해석을 수행하여 제안식을 설정하였으며, 직접미분에 의해서 설계 민감도를 구하여 ,최적화 알고리즘과 결합하여 최적의 공차를 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.218-222
• /
• 2011

This paper proposes a single-joint optical torque sensor with one body structure. Conventional optical torque sensors consist of three parts, two plates and an elastic structure. They have slightly slipping problem between plates and elastic structure due to the manufacturing tolerance. Since the order of measurement range of optical sensor is about ten micrometers, the slipping problem causes large measurement error, especially in the case of vibrational or high speed plant. This problem does not occur in the proposed design due to the one body structure. The proposed sensor has advantage of low cost, light weight, and small size. And it is easy to design and manufacture. Simulation works that analysis of stress and strain are performed accurately. To demonstrate the performance of proposed sensor, experiments were implemented to compare with a commercial force/torque sensor (ATI Mini45).

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.366-369
• /
• 2006

Multi Housing design has not considered the remodeling even at the beginning of the construction. This severely hindered systematic maintenance, providing fundamental causes of consuming society. In general, in about 20 years when the buildings become too old, they are brought down or removed with a trail of waste left behind. In addition, since the current remodeling or future remodeling type is a general remodeling that leaves only a frame, some question the role of the remodeling as a solution to the reconstruction from economically and environmentally efficient aspects. This study intends to find a solution for long-life span multi-family housing design, promoting sequential remodeling by stating the life cycle of components. Problems were identified by analyzing joints, design and construction of multi-family housing based on the previous researches. Conclusion from characterization of the design plan according to joint parts can be summarized as the following firstly, the problem of the wet was seen in joints between the structure and a finishing materials and ones between separate finishing materials. Secondly, the problem of overlap was frequently seen in joints between the structure and a door/window, ones between a door/window and a finishing materials, and ones between a finishing materials and an electrical/mechanical device.