• Journal of Embryo Transfer
• /
• v.30 no.4
• /
• pp.265-270
• /
• 2015

Growth rate during rearing, which varies depending on provided nutrition, has been related with age at $1^{st}$ calving (AFC). This study investigated the effect of upgrowth parameters during the rearing period on the reproduction of nulliparous Holstein heifers. The study comprised 77 successively born heifers from the same herd. Growth rate and fertility traits were measured during rearing and fertility parameters were recorded in lactations 1. Growth parameters (body weight, height, heart girth and body length) were measured at the approximate birth time, 270 and 450 d of age. Reproduction data collected included age at $1^{st}$ breeding, number of services per conception (S/C), pregnancy rate to $1^{st}$ artificial insemination, AFC. Animals were subsequently divided into 4 AFC groups for analysis: <23 mo, 23~25 mo, 26~30 mo and >30 mo. The AFC reflected both upgrowth rate and heifer reproduction, with later calving heifers smaller. Increased skeletal growth (at 270 and 450 d) was related with a reduced AFC (p<0.05). Early calving animals (<23 mo) had the best reproduction as nulliparous heifers, with most conceiving at first service (87.5%). Fertility in the first lactation was the worst in the oldest AFC group (>30 mo). In the 1st lactation period, a number of services per conception ($3.1{\pm}0.3$) increased with increasing AFC (>30 mo). Sub-optimal upgrowth related with an increased AFC could be mitigated by improved monitoring of replacement heifers during the rearing period.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.96-101
• /
• 2013

In this paper we analyzed the effects of polystyrene(PS) blended in TIPS-pentacene on the performance of OTFTs. With the various molecular weight and the content of PS the performance of TIPS-pentacene OTFTs was examined and the proper molecular weight and the content were extracted for the best results. With the molecular weight of 9,580 and 0.3 wt% of PS OTFTs produced the mobility of $1.0{\pm}0.19cm^2/V{\cdot}sec$, the subthreshold slope $0.22{\pm}0.05$ V/dec, the threshold voltage $-1.19{\pm}1.21$ V, the current on/of ratio $7.12{\pm}2.09{\times}10^6$. Additionally the suitable substrate temperature for ink jet printing of the blended TIPS-pentacene OTFTs was also extracted and it was $46^{\circ}C$.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.56.2-56.2
• /
• 2014

We present [Fe II] 1.64 ${\mu}m$ imaging observations for jets and outflows from young stellar objects over the northern part (${\sim}24^{\prime}{\times}45^{\prime}$) of the Carina Nebula, a massive star forming region. The observations were performed with IRIS2 of Anglo-Australian Telescope and the seeing was ~1.5". Eleven jets and outflows features are detected at eight different regions, and are termed as Ionized Fe Objects (IFOs). The [Fe II] features have knotty or elongated shapes, and the detection rate of IFOs against previously identified YSOs is 1.4%. Four IFOs show anti-correlated peak intensities in [Fe II] and $H{\alpha}$, where the ratio I([Fe II])/I($H{\alpha}$) is higher for longish IFOs than for knotty IFOs. We estimate the outflow mass loss rate from the [Fe II] flux using two different methods. The jet-driving objects are identified for three IFOs (IFO-2, -4, and -7). The ratios of the outflow mass loss rate over the disk accretion rate for IFO-4 and -7 are consistent with the previously reported values ($10^{-2}-10^{+1}$), while the ratio is higher for IFO-2. This excess may result from underestimating the disk accretion rate. Other YSO physical parameters show reasonable relations or trends.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.58-65
• /
• 2018

To improve the performance of high-speed vehicles, various studies have been carried out on the head of vehicles. In this study, tests are conducted on flow characteristics and drag reduction using counterflow air jets in supersonic flow. The flow is visualized by the Schlieren method using a high-speed camera, and the drag is measured using a torque sensor according to the injection pressure conditions. The results of the measurements indicate that the flow changes from unsteady state to steady state for injection pressure ratios between 1.58 and 1.70, and drag reduction is observed as the pressure of the counterflow air jets increases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.421-427
• /
• 2009

We successfully fabricated 4.7-inch organic thin film transistors array with $640{\times}480$ pixels on flexible substrate. All the processes were done by photolithography, spin coating and ink-jet printing. The OTFT-Electrophoretic (EP) pixel structure, based on a top gate OTFT, was fabricated. The mobility, ON/OFF ratio, subthreshold swing and threshold voltage of OTFT on flexible substrate are: 0.01 ^2/V-s, 1.3 V/dec, 10E5 and -3.5 V. After laminated the EP media on OTFT array, a panel of 4.7-inch $640{\times}480$ OTFT-EPD was fabricated. All of process temperature in OTFT-EPD is lower than $150^{\circ}C$. The pixel size in our panel is $150{\mu}m{\times}150{\mu}m$, and the aperture ratio is 50 %. The OTFT channel length and width is 20 um and 200um, respectively. We also used OTFT to drive EP media successfully. The operation voltages that are used on the gate bias are -30 V during the row data selection and the gate bias are 0 V during the row data hold time. The data voltages that are used on the source bias are -20 V, 0 V, and 20 V during display media operation.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.327-336
• /
• 2018

To date, there are no protocols optimized to the effective separation of spermatogonial stem cells (SSCs) from testicular cells derived from mouse testes, thus hindering studies based on mouse SSCs. In this study, we aimed to determine the most efficient purification method for the isolation of SSCs from mouse testes among previously described techniques. Isolation of SSCs from testicular cells derived from mouse testes was conducted using four different techniques: differential plating (DP), magnetic-activated cell sorting (MACS) post-DP, MACS, and positive and negative selection double MACS. DP was performed for 1, 2, 4, 8, or 16 h, and MACS was performed using EpCAM ($MACS^{EpCAM}$), Thy1 ($MACS^{Thy1}$), or GFR ${\alpha}1$ ($MACS^{GFR{\alpha}1}$) antibodies. The purification efficiency of each method was analyzed by measuring the percentage of cells that stained positively for alkaline phosphatase. DP for 8 h, $MACS^{Thy1}$ post-DP for 8 h, $MACS^{GFR{\alpha}1}$, positive selection double $MACS^{GFR{\alpha}1/EpCAM}$, and negative selection double $MACS^{GFR{\alpha}1/{\alpha}-SMA}$ were identified as the optimal protocols for isolation of SSCs from mouse testicular cells. Comparison of the purification efficiencies of the optimized isolation protocols showed that, numerically, the highest purification efficiency was obtained using $MACS^{GFR{\alpha}1}$. Overall, our results indicate that $MACS^{GFR{\alpha}1}$ is an appropriate purification technique for the isolation of SSCs from mouse testicular cells.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.153-166
• /
• 2004

The purpose of this study was to investigate time of the phase, angle of the right ankle, knee, and hip joint, lateral angle of the trunk, mediolateral displacement of COM, and vertical displacement of COM between two groups while executing grand battement $jet{\acute{e}}$ $\acute{a}$ la seconde in a center exercise setting through 3D video analysis. The subjects participated in this study were skilled and unskilled 6 female ballet majors in Busan, respectively. The conclusions are as follows: 1. The time of the phase 2 was faster than P3. It shows a significant difference(p<.05) for P1 and P4 between skilled and unskilled groups 2. The angle of He right ankle joint has a significant difference(p<.05) at E4 between skilled and unskilled groups. The angle of the right knee joint has no significant difference at all events between skilled and unskilled groups. The angle of the right hip joint has a significant difference(p<.001) at E3 between skilled and unskilled groups. 3. The lateral angle of the trunk has a significant difference(p<.05) at E1 and at E5 between skilled and unskilled groups. The skilled group of the lateral angle of the trunk was lower than the unskilled group. However the skilled group's lateral angle of the trunk was bigger than the unskilled group at E3. It has significant difference(p<.001) at E3 between skilled and unskilled groups. 4. The mediolateral displacement of COM has no significant difference at all events between skilled and unskilled groups. The vertical displacement of COM has a significant difference(p<.01) at E3 between skilled and unskilled groups.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.143-147
• /
• 2015

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Various researches have been trying to improve the quality of semen Post-thawed in boar. Recently, polymorphism (g. 35756 T>C) of Estrogen Receptor 1 (ESR1) gene reported to be significant association with MOT. This study was conducted to evaluate the ESR1 gene as a positional controlling for motility and kinematic characteristics of post-thawed boar semen. To results, The g.35756 T>C SNP of ESR1 was significantly associated with frozen semen motility and kinematic characteristics. The g.35756 T>C SNP was high significantly associated with MOT, VCL, VSL and VAP (p<0.001). The SNP was also significantly associated with ALH (P<0.05). Therefore, we suggest that the g. 35756 T>C polymorphism in the intron 1 region of the porcine ESR1 gene could potentially be applied in frozen semen programs to improve MOT trait, but only after validation in other populations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.6
• /
• pp.860-873
• /
• 1998

In a low speed open-type wind tunnel, a group of parallel wakes downstream of two dimensional grid model consisting of several circular cylinders were experimentally investigated to study the response of the wake flows to the acoustic excitation, in hoping to promote the understanding of the underlying mechanism behind the gross flow change due to artificial excitation. In the unexcited wake flows, the development of the individual wakes behind cylinders was almost uniform for the ratio of the spacing to the cylinder diameter of s/d.geq.1.5. For smaller s/d, however, the jet streams issued through the gaps between the cylinders became biased in one side and the cylinders had wakes of different sizes. At s/d=1.25, the gap flow directions change in time, leading to unstable wake patterns. Further reduction in s/d made this unstable flip-flopping of the jets stable. The most effective excitation frequency was found to be in the Strouhal number range of St=0.5-0.6. This frequency was related to the vortex shedding. At s/d=1.75, the excitation frequency was 2 or 4 times the vortex shedding frequency. When the flow was excited at this frequency, the vortex sheddings were energized, and pairings between neighboring vortices were generated. Also, the merging process between individual wakes was accelerated. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. For smaller spacing of s/d .leq,1.0, the acoustic excitation became less effective in controlling the flow.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.261-267
• /
• 2013

In this paper, wind tunnel test and analytical prediction are compared for result of flapping motion in helicopter forward flight condition. Tests were performed at low speed wind tunnel at Chungnam National University, test section of wind tunnel has 1.8 by 1.8 meter open-jet test section area. According to the results of measured data for aerodynamic performance of model rotor in forward flight. It has to observed the difference of analytical and measured results of power coefficient for fixed thrust coefficient. And calculated and measured data of helicopter rotor flapping angles in forward flight are compared for a model rotor in a wind tunnel. A test was conducted to verify the measured data of coning and lateral/longitudinal flapping angle with predicted values.