• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1589_1590
• /
• 2009

본 논문에서는 구면 렌즈 검사를 위해 제작된 Fizeau형 위상 천이 간섭계(Fizeau-type Phase Shifting Interferometer : FPSI)에 비구면 해석 알고리즘을 적용한 소형 비구면 렌즈 해석 방법을 제안한다. 또한 본 논문에서 제안한 방법의 측정 결과와 기존 비구면 검사 시스템의 측정 결과를 비교하여 그 성능을 평가한다.

• Journal of the Korean Society of Costume
• /
• v.54 no.7
• /
• pp.15-26
• /
• 2004

The internet is one of the modern facilities that has been diffused very rapidly in recent years and tremendously influenced on our life. Although the adolescents are major users of internet, the literature in clothing and textile area has not addressed the relationships between adolescents' internet use and clothing behavior, The purpose of this study was to examine the differences of adolescents clothing behavior. purchase evaluative criteria, and information source according to the use of internet. Descriptive statistics, t test, Analysis of Variance (ANOVA), and Duncan test were employed to analyze the data collected from the convenience sample of 572 middle and high school students in Gyeongnam, Korea. The use of internet was partially related to the adolescents' clothing behaviors. purchase evaluative criteria. and information source. Also, it was observed that the frequency and purpose of fashion website tended to be related more than the amount and purpose of internet did. Marketing implications from the results were suggested.

• KDI Journal of Economic Policy
• /
• v.21 no.1
• /
• pp.105-157
• /
• 1999

북한의 심각한 식량난 문제는 남한은 물론 국제사회의 커다란 관심사가 되어오고 있다. 식량난은 영양공급을 감소시킴으로써 노동생산성을 저하시키게 되고 결국 경제성장에도 부정적인 영향을 미치게 된다. 그러나 북한 식량난에 대한 대부분의 연구는 식량난 정도의 파악 혹은 지원이나 협력을 통한 해결방안의 모색에 머무르고 있을 뿐, 식량난의 경제적 파급효과에 대한 연구는 거의 없는 실정이다. 본 연구는 1995년 이후 북한이 겪고 있는 심각한 식량난으로 인하여 북한주민의 에너지 섭취량이 어느 정도 저하되어 있는가를 파악하고, 이러한 에너지 섭취량의 저하가 노동생산성에 어떠한 여향을 미치고 있는가를 추정하고 있다. 추정결과에 의하면, 1997년 현재 북한주민의 하루 평균 에너지 섭취량은 1,600kcal 수준으로 1994년에 비하여 약 20% 감소되었으며, 이는 노동생산성과 생산량을 약 13% 저하시킨 것으로 나타났다. 이러한 추정결과는 남한이나 중국의 경우와 비교한 결과 설득력이 있는 것으로 나타났다. 한편 이 기간중 북한 경제규모 축소의 약 30%는 에너지 섭취량의 감소에 따른 노동생산성의 저하에 기인하는 것으로 추정되었다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1970-1972
• /
• 2003

In this paper, a fiber optic current sensor(FOCS) is implemented by low birefringence fiber, and the characteristics of FOCS is investigated. Using the Faraday rotation, the electric current is measured. The measured error is calculated within 1.5% ranging from 1000 to 7500A.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.906-908
• /
• 2003

A Linear induction electromagnetic(EM) pump of liquid metal fast breeder reactor(LMFBR) is used for the purpose that the liquid metal of high temperature is transported by EM force. This paper evaluates magnetic flux density necessary for transporting liquid metal, using analytical model of the linear induction EM pump. Using the 2-D finite element method(2-D FEM), magnetic flux density is estimated in consideration of a geometric model, electric parameter, and velocity of liquid metal. From the viewpoint of hydrodynamics, the results can be used for flow analysis of the liquid metal.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.259-262
• /
• 2009

Several universities in Korea are beginning studies related to soft stamping processes but since the studies are done with manual works thus systematic tests can't be performed due to difficulties in producing reproducible and repeatable fine patterns. Therefore, the phenomenon of destruction of the pattern forms of elastic polymers occurred during working because of inconsistent printing pressures and pinting time and there have been difficulties in maintaining flatness or producing uniform and fault-free fine structures in pinting large areas and also, there have been difficulties in multi-layered processes as patterns were changed by contacts in registering and errors in alignments. The purpose of development of this technology is to improve the process of soft lithography so that contacts between PDMS stamps and metal coated substrates in order to develop a stamp printing device that can not only shorten but also optimize processes, secure reproducibility and repeatability and is advantageous in printing large areas. Also, using this technology, this author is to develop equipment technologies and applied technologies for nano grade pattern printing processes with new concepts based on fine contact printing processes in order to apply them to diverse nano pattering processes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1051-1060
• /
• 2008

The use of the coal ash for surcharge material, in a view of the environmental aspect, can decrease amount of the reclamation through recycling waste materials as well as prevent a destruction of the ecosystem attributed to sand picking. In addition, it can reduce both unit cost of material and construction expenses. In this study, new construction material as alternative surcharge material using coal ash, which is by-product from thermoelectric power plant, were developed. Mixing ratios of fly ash and bottom ash derived from the coal ash in Samchunpo thermoelectric power plants were determined. Furthermore, mixing conditions depending on the ratios of the cement and gypsum used for chemical additive were determined too. Uniaxial compression strength tests were conducted at different mixing conditions and Design graph of optimum mixing ratio at each required strength for economic efficiency is indicated in this paper.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.952-964
• /
• 2007

This study is about the design for environment which is central social interest in recent days. This study focused on both experimental designs which convey meanings and practical designs which can be produced within the fashion industry and then influence on the wide range of consumer, human and surrounding environment. The purposes of this study are to categorize national and global fashion designs for environment, to analyze data based on the fashion pipeline from planning to discard, to suggest systematic actions, and to establish fashion design for environment model. Through these processes, this study helps in making fashion designs for environment more understandable, and demonstrates one future direction for using environment as fashion industry's innovative strategy. This study attempts to create business and at the same time suggests design actions based on social belief. The results of this study are following. Fashion designs for environment were categorized by organic fabric, new-to-the-world fabric, reduce, multi-function, reproduce, order-made, recycle, and reuse. The results show that fashion designs for environment have been implemented throughout the fashion pipeline, and applied the concepts of design for environment including green, sustainable slow, and natural design principles. Furthermore, labelling and service from supply side, green purchasing from demand side, and integration from both sides are suggested as company's and society's systematic actions.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1127-1132
• /
• 2014

Fast tool servo (FTS) is an enabling technology to fabricate various shapes of functional surface geometries in a precise and controllable manner. FTS can be also employed as a straightforward and efficient surface treatment way of making such products more durable. In this work, process characteristics using high-precision FTS-based surface texturing were qualitatively and quantitatively investigated to provide a class of surface design rule. The morphologies of surfaces processed with different conditions were first examined by observing the resultant 2D/3D surface profiles. In addition, the effects of the surface treatment using FTS on hardness and wear properties were characterized and compared to those without treatment.

• Korean Journal of Microbiology
• /
• v.6 no.3
• /
• pp.92-92
• /
• 1968

1) The aim of present investigation is to elucidate the relation of the balance of the production and decomposition of the fir litter. in Kwangnung plantation stands. 2) The decay constant, K, of litters was 0. 185 for the fir stand at Kwangnung. 3) The mode for the accumulation of organic carbon ($C_a$) is $c_a$= $610(1-e^{-0.185t})$), and for the decay of organic carbon (C) C = $610(1-e^{-0.185t})$. 4) The time required for the decay of half of the accumulated organic carbon in the fir stand is 3. 74 years and for 99% of elimination 27.02 years. 5) The litters of Abies holophylla killed by heat and washed with alcohol-benzol, with hot water, or with both alcohol-benzol and hot water were incubated after inoculated with suspension of firwood soil. Plate counts were made of fungi and bacteria from time to time. 6) Removal of the alcohol-benzol soluble substance stimulates at the beginning of the decay the growth of fungi and also of bacteria. 7) Removal of the water soluble fraction is detrimental to the growth of fungi in particular. 8) The distribution of soil microbial population is higher in both F and H horizon of the fir plantation soil in Kwangnung. However, the number of soil microorganisms decreases with the depth in forest soil.