• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.415-422
• /
• 2003

Currently, 'National program of dental sealant' has begun in Korea, but various isolation techniques and preparation is performing. The aim of the present study was to compare pit and fissure sealant retention rates between different operators using two different isolation techniques. Additionally, the failed surface was examined. One examiner performed the examination after one year of the initial operation. The population consisted of 119 children(mean age $8.59{\pm}0.772$) of which the total sealed number was 279 permanent first molars. Pediatric dentists sealed 131 molars using the rubber dam isolation technique (Group 1), general practitioners sealed 80 molars using the rubber dam isolation technique (Group 2), and dental hygienists sealed 69 molars using the cotton roll isolation (Group 3). The results were as follows ; 1. The complete retention rate between Group 1 (90.8%) and 2 (85.0%) showed no significant statistical difference (P>0.05). However, there were significant statistical different retention rates between Group 1 and Group 3(64.7%) and between Group 2 and Group 3 (p<0.05). 2. In comparing retention rates between maxilla and mandible, Only Group 3 showed a significantly lower complete retention rate in mandible than maxilla (p<0.05). 3. In failed surface analysis, occlusal failed surface was 58.3%, buccal/palatal failed surface was 41.7%.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.359-369
• /
• 2007

This in vitro study was performed to assess the effect of surface sealing on the microleakage of class V composite resin restorations that underwent several aging treatments. Class V cavities were prepared on the buccal surface of 100 sound extracted premolars and restored with a hybrid light-cured composite resin according to the manufacturer's instructions. They were randomly divided into two groups consisting of 50 samples: group I, without surface sealing, and group II, in which margins were etched and surface sealant was applied. After thermocycling, each group was divided into five subgroups, respectively, to represent the five aging treatments: group A = no further treatment (only thermocycling), B = toothbrushing, C = load cycling, D = toothbrushing followed by load cycling, and E = aging treatment in deionized water for six months. Microleakage was assessed by examining the penetration of 2% methylene blue dye. The following results were obtained: 1. At occlusal and cervical margins in groups without surface sealing, there was no significant difference in microleakage after the several aging treatments (p>0.05). 2. The occlusal margins of groups with surface sealing showed no significant differences after the several aging treatments (p>0.05). 3. In the cervical margins of groups with surface sealing, microleakage significantly increased after load cycling or aging in deionized water for six months (p<0.05). 4. The no-further-treatment group and the toothbrushing group with surface sealing showed less microleakage than the corresponding groups without surface sealing (p<0.05). 5. The surface-sealed groups with load cycling or aging in deionized water showed no significant difference in microleakage to the corresponding groups without surface sealing (p>0.05). In conclusion, the results of this study suggest that the surface sealant infiltrating through the gap of the cervical margin exerted a positive effect on microleakage at the initial stage, but the effect was not sufficient to overcome the stress generated by the cuspal flexure during occlusal loading and water absorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.119-125
• /
• 2009

Fusion and gemination are irregularities in tooth development. It is often difficult to differentiate between gemination and fusion and it is common to refer to these anomalies as 'double teeth'. The deciduous teeth are most commonly involved, but in 0.1% of cases permanent teeth are affected, in which case aesthetic, funtional and periodontal problems can result. Double teeth present great difficulties in management and required a multidisciplinary approach. The central groove on the labial and palatal surfaces of a double tooth is extremely prone to caries, therefore early 'fissure sealing' is essential. In permanent dentition, surgical separation of fused teeth may be possible with subsequent orthodontic alignment and restorative treatment as needed to reshape the crown. Reshaping or reduction of a double tooth with a single canal may be attempted by modifying the appearance of the labial groove and the use of composite tints but is often impossible and extraction may be the only alternative. Orthodontic treatment and prosthetic replacement is then required. Implants may be an option for adolescents. The present study describes three clinical cases of double teeth in the position of the maxillary permanent incisors. The first case demonstrates an example of multidisciplinary care including surgical intraoral hemisection, root canal therapy, restorative and orthodontic treatment. The second and third cases describe the external and internal morphology of the two fused teeth by means of three dimensional dental computer tomography.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.3
• /
• pp.248-256
• /
• 2005

Background : Nontuberculous mycobacterial (NTM) infections are increasingly being recognized as a cause of chronic pulmonary disease. This study describes the prevalence of NTM species from clinical specimens and the clinical characteristics of NTM pulmonary disease. Material and Methods : The NTM isolated from March 2003 to December 2003 at the Kosin Medical Center were identified using an oligonucleotide chip containing the internal transcribed space (ITS) sequence. The medical records of the patients with the NTM isolates, who fulfilled the 1997 ATS diagnostic criteria for NTM pulmonary disease, were analyzed, retrospectively. Results : Twenty four species (24.2%) of NTM were isolated from 99 cultured AFB specimens. M. avium complex (MAC) (13 isolates), M. szulgai (3), M. kansasii (2), M. malmoense (2), M. abscessus (1), M. chelonae (1), M. scrofulaceum (1), and unclassified (1). Of the 23 patients with isolated NTM, 11 patients were found to be compatible with a NTM pulmonary infection according to the ATS criteria; MAC was found in 6 cases (54.5%), M. szulgai in 2 cases (18.2%), and M. abscessus, M. szulgai, M. kansasii and M. malmoense in 1 case each (9.1%). Ten patients (91%) were male and the median age at diagnosis was 61 years. In the pre-existing diseases, malignant disease was found in 6 cases including 5 patients with lung cancer, and history of old pulmonary tuberculosis was identified in 4 cases. The radiological patterns showed lung destruction lung in 3 cases, a cavitary mass in 3 cases, a nodular pattern in 2 cases, and reticulonodular, consolidation and a bronchiectasis pattern were in 1 case each. Conclusion : Various types of NTM pulmonary diseases were found in a tertiary hospital at Busan, Korea. The NTM pulmonary diseases were caused by MAC, M. szugai, M. kansasii, M. malmoense, M. abscessus, M. chelonae, and M. scrofulaceum in the order of frequency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1353-1361
• /
• 2009

This study investigated the effect of waxy barley on the incorporation trans fat (tFA) into plasma lipid and lipid profile through 6 weeks trial. 39 healthy volunteers were divided into 2 groups and fed waxy barley bread (WBG) or wheat bread (WG) containing equivalent amounts of tFA (elaidic acid rich, 3.75 g/day), respectively. Plasma lipid profiles and fatty acid composition at 0, 2, 4, 6 weeks after a respective bread were studied. Plasma lipid was extracted by the method of Folch, esterified by acid transmethylation and analyzed by gas chromatography. The fatty acid composition reflected the fatty acid proportion of the test fat. However, consumption of waxy barley bread with tFA for 6 weeks affected plasma fatty acid composition including tFA. Incorporation of tFA into plasma lipid was significantly lowered compared to WBG than in WG after 6 weeks of consumption. Furthermore, saturated fatty acids such as C16:0 and C18:0 levels were also significantly lowered in WBG than in WG. Furthermore, plasma total cholesterol level and TG/HDL-cholesterol ratio were also significantly lowered in WBG compared to WG at 2, 4 and 6 weeks. These results suggest that waxy barley bread with high $\beta$-glucan lowered plasma trans, saturated fatty acid and total cholesterol levels though the inhibition of lipid absorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1749-1756
• /
• 2014

This study was performed to establish extraction conditions for useful components from sweet potato leaves. Extraction conditions were heating temperature ($40{\sim}60^{\circ}C$), ratio of solvent to sample (10~30 mL/g), and ethanol concentrations (50~90%). The maximum lutein content was $381.88{\mu}g/g$ under the following conditions: 81.23% ethanol concentration, $46.75^{\circ}C$ temperature, and 25.78 mL/g ratio of solvent. The maximum total polyphenol content was 58.44 mg GAE/g under 67.0%, $53.90^{\circ}C$, and 29.10 mL/g, whereas maximum total chlorophyll content was 769.14 mg/100 g under 93.10%, $69.90^{\circ}C$, and 25.98 mL/g, respectively. The highest antioxidant activity of electron-donating ability ($IC_{50}$) was 0.582 mg/mL under 64.56%, $54.63^{\circ}C$, and 19.57 mL/g, whereas total antioxidant activity was 32.54 mg AA eq/g under 64.42%, $44.51^{\circ}C$, and 26.01 mL/g, respectively. Under these conditions, experimental data matched well with the predicted data. Consequently, the present study was carried out to simulate and optimize sweet potato leaves for useful component extraction.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.215-231
• /
• 2018

It was analyzed to identify the cause of $PM_{2.5}$ concentration changes for the fall in 2016 and 2017 in South Korea using ground measurement data such as meterological variables and $PM_{2.5}$, AOD from GOCI satellite, and WRF-CMAQ modeling system. The result of ground measurement data showed that the $PM_{2.5}$ concentrations for the fall in 2017 decreased by 12.3% ($3.0{\mu}g/m^3$) compared to that of 2016. The difference of $PM_{2.5}$ concentrations between 2016 and 2017 mainly occurred for 11 Oct. - 20 Oct. (CASE1) and 15 Nov. - 19 Nov. (CASE2) when weather conditions were difficult to long-range transport from foreign regions and favored atmospheric ventilation in 2017 compared to 2016. Simulated $PM_{2.5}$ concentrations in 2017 decreased by 64.0% ($23.1{\mu}g/m^3$) and 35.7% ($12.2{\mu}g/m^3$) during CASE1 and CASE2, respectively. These results corresponded to the changes in observed $PM_{2.5}$ concentrations such as 53.6% for CASE1 and 47.8% for CASE2. It is implied that the changes in weather conditions affected significantly the $PM_{2.5}$ concentrations for the fall between 2016 and 2017. The contributions to decreases in $PM_{2.5}$ concentrations was assessed as 52.8% by long-range transport from foreign regions and 47.2% by atmospheric ventilation effects in domestic regions during CASE1, whereas their decreases during CASE2 were affected by 66.4% from foreign regions and 33.6% in domestic regions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.231-240
• /
• 2009

A total of 26 Korean elite soybean cultivars including 21 certified cultivars was assessed to evaluate genetic diversity and to analyze relationship among them based on 15 SSR markers. Fifteen SSR markers generated a total of 201 alleles. Average number of alleles per SSR marker was 13.4 with a range from 8 to 19. Genetic diversity of 26 cultivars estimated by PIC value ranged from 0.782 to 0.931 with an average of 0.874. PIC value of Satt197 was the highest with 0.931 and Satt141 was the lowest with 0.782 among 15 SSR markers. Cluster analysis based on genetic distances classified 26 soybean cultivars into 3 clusters. Cluster I, II and III included 2, 7 and 17 cultivars, respectively. Average genetic diversity within clusters was 0.769 with a range from 0.720 to 0.799. Average genetic diversity between clusters was 0.813 with a range from 0.725 to 0.857. Genetic diversity was higher between clusters than within clusters. Genetic relationship among clusters was near between I and II, and I and III and far between II and III cluster. All of 26 Korean elite soybean cultivars could be identified by using any of 5 combinations of 2 SSR markers with higher PIC value, i.e, $Satt197+Sat_088$, Satt197+Satt245, $Sat_088+Sat_-036$, $Sat_088+Satt245$ and Satt185+Satt245.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.485-495
• /
• 2020

Melon (Cucumis melo L.), one of the most important fruit crop species, is cultivated worldwide. In this study, a total of 206 melon accessions conserved at the National Agrobiodiversity Center (NAC) in RDA were characterized for nine morphological characteristics according to the NAC descriptor list. In addition, to confirm the genetic composition of each melon accession, genetic profiling was performed using 20 SSR markers. Among the 206 melon accessions, 159 (77.2%) were collected from Asia. The color of fruit flesh and skin were mostly 'white' (56.0%) and 'green' (49%), respectively. Days to female flowering (FD) and maturity (MD) of the accessions ranged from 58 to 72 and 17 to 63, respectively. The fruit length and width of the accessions ranged from 6.0 to 29.3 and 3.6 to 17.2 cm, respectively. The sugar content (SU) ranged from 2.5% to 13.2% with an average of 7.0%. In correlation analysis, SU showed positive and negative correlations with MD and FD, respectively. The accessions were classified into four clusters by cluster analysis. From the results of genetic profiling using 20 SSR markers, three accessions (K189118, K100486, and K190292) were expected to be inbred lines among 206 melon accessions. These results could expand the knowledge of the melon germplasm, providing valuable material for the development of new melon varieties to suit consumer tastes.