• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.113-125
• /
• 2018

Since the global positioning system receivers on the surface of the Earth use satellite signals sent from a remote distance and the intensity of received signals is weak, they are vulnerable to jamming. This paper implements a vector-tracking loop (VTL)-based global navigation satellite system (GNSS) receiver algorithm as an anti-jamming technique and compares the performance of VTL-based receivers with that of scalar-tracking loop (STL) that is used in general GNSS receivers at various jamming environments and a vehicle's dynamics. The simulation results shows that VTL is more robust against jamming than STL in all operating environments.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.91-101
• /
• 2005

In this paper, a technique for the quantitative analysis of the noise jamming effect is proposed. This technique based upon the mathematical modeling for noise jammers and the probability theory for random processes analyses the jamming effect by means of the modeling of the relationship among jammer, radar variables and radar detection probability under noise jamming environment. Computer simulation results show that the proposed technique not only makes the quantitative analysis of the jamming effect possible, but also provides the basis for quantitative analysis of the electronic warfare environment.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.665-670
• /
• 2016

This paper proposes a repeat-back jamming signal detection scheme using a correlation ratio test metric of a combined pseudo-random noise signal for global navigation satellite systems. The correlation ratio test metric allows for the monitoring of possible distortions in the signal correlation. The proposed scheme is a modified version of the correlation ratio test metric to detect a repeat-back jamming signal in a multipath environment. Through a Monte-Carlo simulation, it is confirmed that the proposed scheme detects almost the whole case, which is received a repeat-back jamming signal under the 6 dB jamming to signal power ratio.

• ETRI Journal
• /
• 제37권5호
• /
• pp.898-905
• /
• 2015

In this paper, we consider a joint beamforming and jamming design to enhance physical layer security against potential multiple eavesdroppers in a multiple-input and single-output cellular broadcast channel. With perfect channel state information at the base station, we propose various design approaches to improve the secrecy of the target user. Among the proposed approaches, the combined beamforming of maximum ratio transmission and zero-forcing transmission with a combination of maximum ratio jamming and zero-forcing jamming (MRT + ZFT with MRJ + ZFJ) shows the best security performance because it utilizes the full transmit antenna dimensions for beamforming and jamming with an efficient power allocation. The simulation results show that the secrecy rate of this particular proposed approach is better than the rates of the considered conventional approaches with quality-of-service and outage probability constraints.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.326-332
• /
• 2019

In the case of conventional soft robots, the basic stiffness is small due to the use of flexible materials. Therefore, there is a limitation that the load that can bear is limited. In order to overcome these limitations, a study on a variable stiffness method has been conducted. And it can be seen that the jamming mechanism is most effective in increasing the stiffness of the soft robot. However, the jamming mechanism as a method in which a large number of variable act together is not even theoretically analyzed, and there is no study on intrinsic principle. In this paper, a study was carried out to increase the stability of the force chain to increase the stiffness due to the jamming transition phenomenon. Particle size variables, backbone mechanisms were used to analyze the stability of the force chains. We choose a jamming mechanism as a variable stiffness method of a soft robot, and improve the effect of stiffness based on theoretical analysis, modeling FEM simulation, prototyping and experiment.

• ETRI Journal
• /
• 제43권4호
• /
• pp.758-768
• /
• 2021

In this work, the secrecy of a typical wireless cooperative dual-hop non-orthogonal multiple access (NOMA)-enabled decode-and-forward (DF) relay network is investigated with the impact of collaborative and non-collaborative eavesdropping. The system model consists of a source that broadcasts the multiplexed signal to two NOMA users via a DF relay, and information security against the eavesdropper nodes is provided by a helpful jammer. The performance metric is secrecy rate and ergodic secrecy capacity is approximated analytically. In addition, a differential evolution algorithm-based power allocation scheme is proposed to find the optimal power allocation factors for relay, jammer, and NOMA users by employing different jamming schemes. Furthermore, the secrecy rate analysis is validated at the NOMA users by adopting different jamming schemes such as without jamming (WJ) or conventional relaying, jamming (J), and with control jamming (CJ). Simulation results demonstrate the superiority of CJ over the J and WJ schemes. Finally, the proposed power allocation outperforms the fixed power allocation under all conditions considered in this work.

• ETRI Journal
• /
• 제41권3호
• /
• pp.316-325
• /
• 2019

Accurate suppressive jamming is a prominent problem faced by radar equipment. It is difficult to solve signal detection problems for extremely low signal to noise ratios using traditional signal processing methods. In this study, a joint sensing dictionary based compressed sensing and adaptive iterative optimization algorithm is proposed to counter suppressive jamming in information domain. Prior information of the linear frequency modulation (LFM) and suppressive jamming signals are fully used by constructing a joint sensing dictionary. The jamming sensing dictionary is further adaptively optimized to perfectly match actual jamming signals. Finally, through the precise reconstruction of the jamming signal, high detection precision of the original LFM signal is realized. The construction of sensing dictionary adopts the Pei type fast fractional Fourier decomposition method, which serves as an efficient basis for the LFM signal. The proposed adaptive iterative optimization algorithm can solve grid mismatch problems brought on by undetermined signals and quickly achieve higher detection precision. The simulation results clearly show the effectiveness of the method.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.776-783
• /
• 2011

현대 전쟁에서는 직접 적을 타격하여 파괴하는 것뿐만 아니라 적의 전투 능력을 무력화하는 재밍의 중요성이 증가하고 있다. 잡음 재밍은 전자전 재밍 기법의 기본이 되는 기법으로 재밍하고자 하는 장비의 수신기 특성에 영향을 적게 받으며, 거의 모든 수신 장치를 교란할 수 있는 방식이다. 잡음 재밍의 경우, 출력 대비 효율을 높이기 위해 적 수신기의 대역폭과 잡음의 대역폭을 일치시킬 필요가 있으며, 다수의 서로 다른 레이더 표적을 시분할하여 재밍하기 위해 고속으로 잡음 대역폭을 가변할 필요가 있다. 본 논문은 위상 샘플링 방식으로 운용되는 DRFM에 적용할 수 있는 실시간으로 잡음 대역폭 제어가 가능한 재밍 기법을 시뮬레이션을 통해 개발하여 제안한다.

• 전자공학회논문지
• /
• 제52권12호
• /
• pp.55-63
• /
• 2015

최근 무선통신 장비를 이용하여 원격으로 폭발시킬 수 있는 무선 급조폭발물 (RCIED)에 의한 테러의 위협이 전 세계적으로 증가하고 있다. 이에 대응하기 위해 급조폭발물을 기폭 시키는 무선 트리거 신호를 정상적으로 수신하지 못하게 하는 재밍 기법이 사용되고 있다. 기존의 재밍 기법으로는 전 대역에 항상 재밍 신호를 방출하는 상시 광대역 재밍(active barrage jamming) 기법이 주로 사용되고 있으나, 전력 소모가 매우 커서 주요 운송 수단인 차량 탑재용으로 사용하기에는 운용시간이 너무 짧다는 단점이 있다. 이러한 기존 기법의 단점을 극복하기 위하여 최근에 반응 재밍(reactive jamming) 기법이 관심을 받고 있다. 반응 재밍은 폭발 트리거 신호를 감지하여 신호가 존재하는 대역을 선별적으로 대응하는 재밍 기법으로서, 기존 재밍기법에 비해 전력 효율이 높기 때문에 차량 탑재용으로도 운용 시간을 대폭 늘릴 수 있다. 하지만, 반응 재밍은 폭발 트리거 신호를 포착한 뒤 재밍 신호를 방사하기 때문에, 폭발 트리거 신호 환경에 대한 정보를 바탕으로 반응 재밍이 이루어져야 하는 반응시간에 대한 기준이 필요하다. 이를 위해서 본 논문에서는 반응 재밍을 활용할 수 있는 이동통신 환경에 대해서 필요한 반응시간을 이동통신 시스템에서의 호 처리시간(call processing time) 정보를 바탕으로 도출하고, 반응 재밍에서 사용될 수 있는 repeater 재밍에 대해 시뮬레이션을 통해 성능 분석을 수행한다.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.977-983
• /
• 2014

A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.