• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.69-78
• /
• 2017

5G 스마트폰의 샤논과 신호처리의 푸리에가 표본화정리(최고 주파수의 2배분1 즉, $\frac{1}{2f_n}=T$)에서 만난다. 본 논문에서는 초기 샤논 정리가 Point-to-Point에서 샤논 용량을 구했지만 5G는 Multi point MIMO로 기술이 발전했음을 Relay 채널에서 보인다. 푸리에 변환은 고정매개변수로 신호처리를 했는데, 멀티미디어 시대에 2N-1 다변수인 푸리에-Jacket 변환을 제안해서 성능을 분석했다. 이 연구에서 저자는 시간 계산 측면에서 프리 코딩 / 디코딩 복잡성을 줄이기위한 Jacket 기반의 빠른 방법을 제안함으로써 신호 처리의 복잡성 문제를 해결한다. 재킷 변환은 신호 처리 및 코딩 이론에서 응용 프로그램을 찾는 것으로 나타냈다. 재킷 변환은 속성 $AA^{\dot{+}}=nl_n$이 있는 필드 F에 대해 $n{\times}n$ 행렬 $A=(a_{jk})$로 정의되며, 여기서 $A^{\dot{+}}$는 A의 원소 역행렬의 전치 행렬, 즉 $A^{\dot{+}}=(a^{-1}_{kj})$이며, 이는 변환을 일반화하고 중심 가중 변환, 특히 재킷 변환 특성을 이용하여, 저자는 전송 기반의 중계 기반 DF 협동 무선 네트워크에서 분산 다중 입력 다중 출력 채널의 프리 코딩 및 디코딩에 적용하여 새로운 고유치 분해 (EVD : eigenvalue decomposition) 방법을 제안한다. 단일 심볼 디코딩 가능한 시공간 블록 코드를 사용한다. 본 논문은은 제안 된 Jacket 기반 EVD 방법이 기존의 EVD 방법에 비해 계산 시간이 현저히 단축되었다. 계산 시간 단축과 관련된 성능은 수학적 분석 및 수치결과를 통해 정량적으로 평가했다.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.623-639
• /
• 2015

Self-compacting Concrete (SCC) Filled Square steel Tubes (SCFST) was used to strengthen square RC columns. To establish the efficiency of this strengthening method, 17 columns were tested under axial compression loading including 3 RC columns without any strengthening (WRC), 1 RC column strengthened with concrete jacket (CRC), 13 RC columns strengthened with self-compacting concrete filled square steel tubes (SRC). The experimental results showed that the use of SCFST is interesting since the ductility and the bearing capacity of the RC columns are greatly improved. The improvement ratio is significantly affected by the nominal wall thickness of steel tubes (t), the strength grade of strengthening concrete (C), and the length-to-width ratio (L / B) of the specimens. In order to quantitatively analyze the effect of these test parameters on axial loading behavior of the SRC columns, three performance indices, enhancement ratio (ER), ductility index (DI), and confinement ratio (CR), were used. The strength of the SRC columns obtained from the experiments was then employed to verify the proposed mode referring to the relevant codes. It was found that codes DBJ13-51 could relatively predict the strength of the SRC columns accurately, and codes AIJ and BS5400 were relatively conservative.

• 한국의류학회지
• /
• 제30권12호
• /
• pp.1649-1660
• /
• 2006

본 연구는 미국에서 1980년대 후반기 부터 시작되어, 1990년대를 지나오면서 활성화되었던 비즈니스 캐쥬얼과, 2000년대를 시작하면서 재활성화 되기 시작한 전통적이고 보수적인 직장복 스타일을 배경으로, 미국 직장여성들의 비지니스 쟈켓 착용정도를 그들의 개인적, 인구통계적, 사회경제적, 사회심미적, 신체적 특성과 관련하여 비교 연구하였다 직장의 근무 환경과 직장에 대한 만족도 또한 비지니스 쟈켓 착용정도와 관련하여 비교 검토하였다. 연구대상자는 미국에 거주하는 25세 이상의 직장여성들이였으며, 자료는 1999년도에 Database회사인 National Demographics & Lifestyles(NDL) 에서 무작위로 추출한 1500명의 직장여성들에게 우편을 통한 설문지 조사로 수집되었다. 자료분석에는 빈도, 백분율, 편차, 표준편차를 비롯한, Canonical Correlation이 사용되었다. 분석결과에 의하면, 자료수집에 참여한 미국 직장 여성들의 평균 연령은 44세 였으며, 대부분이 기혼 여성들이였으며(77.4%),전문직에 종사하고 있었으며 (75.9%), 적어도 1명 이상의 자녀가 있었다(78.9%). 가설검증결과에 의하면, 미국 직장여성들의 비즈니스 쟈켓 착용정도에 관련된 요소들은 직장여성들의 (1) 연령, (2) 자녀수, (3) 첫째 자녀의 연령, (4) 가족 사이즈, (5) 의복 착용에 대한 자신감, (6) 직장만족도, (7) 의복의 중요성, (8) 체격 사이즈, (9) 의복 사이즈, (10) 직장상사와 대중과의 교류 정도들 이였다. 그 중에서도, 직장 여성들의 첫째아이의 연령, 가족 사이즈, 직장만족도, 의복 사이즈들은 비지니스 쟈켓 착용 정도와 부정적인 상관관계를 보여 주었다.

• 복식문화연구
• /
• 제5권4호
• /
• pp.68-79
• /
• 1997

In this thesis which takes fashion advertising that functions a marketing communication as an objective, I try to bear witness to the signifying system of garments though analyzing with semiotic methodology the signifying procedure on the base of the structural concept of Ferdinand de Saussure and the advertisement semiotic theory of Roland Barthes, to make clear their signifying structure and it meaning by understanding the characteristics of contemporary society and its cognitive system. Each sign of fashion advertising transfers the brand image through syntagmatic signification which contains the mythology of goods. Mannish style is encoded as tailored jacket, white shirt, H-silhouette and pants, non-color or being color, and it is presented as a clothing sign of casual wear for career women. Feminine style is encoded as X-silhouette, soutien collar suit style, various colors, and other details with womanly image, and it is presented as a clothing sign for maid or young wife 20\`s or 30\`s. Formal style is encoded as jacket vest, inner wear(blouse), two and three piece dress by pants or skirt and one-piece dress, and it is used in every age and class. Casual style is similar to formal style, but differs only in textile code. Clothing sign for housewives in middle age is encoded as H-silhouette of formal style, long jacket and pants and brown, being and grey colors. Contemporary popular phenomena in the signification of fashion advertising, and its temporal ideology reflected are as follows; According to the context of fashion advertising in the middle of 1990\`s, its fashion is that first, military look applied from the designs of various sort of military uniform and vest look and pant style applied from dandy-style imitated from man\`s wear are popuar. This mean that it reflects the change of point of view on woman\`s role in society today. That is, due to the equality between man and woman, it mirrors the ideology of feminism, and then, describes beautifully professional woman with carrer. Second, because that individualism is underlied for the change of consumer\`s consciousness, standardized popularity is disappeared, and in accordance with the mixture of various trends and personalities proposed every season, layered look that emphasizes individualism, easiness and naturalness is popular.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.25-34
• /
• 2024

This study investigates consumer awareness and concerns regarding apparel sizing in the realm of online shopping. A survey was conducted with 450 women aged 18-59 who had engaged in online clothing purchases within the past year. It was observed that consumers shop for clothes online an average of 1.6 times per month, with those under 50 shopping more frequently. The importance of size is higher when buying pants than jackets, especially in online shopping compared to offline purchases. Key references guiding online shopping decisions encompassed product sizing codes, customer reviews, and garment dimensions, which were notably favored by consumers with significant concerns. Respondents opted for Korean-style sizing codes for jackets but chose inch-sizing codes for pants. While awareness of height and weight remains high, knowledge of specific body measurements crucial for clothing size design is lacking, suggesting inadequate communication of size information. Respondents prioritized specific areas for jacket and pants fit, yet the lack of comprehensive self-measurements beyond height and weight might present challenges in determining fit based solely on product dimensions. To address this issue, online retailers should display essential garment dimensions and visually suggest clothing sizes according to various body types. These findings provide valuable insights for online retailers to effectively present size information and lay a foundational framework for consumer size education.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.477-490
• /
• 2018

Reinforced concrete (RC) columns, as the primary load-bearing structural components in buildings, may need to be strengthened due to material deteriorations, changes in usage, new building codes or new design requirements. The use of post compressed plates (PCP) to strengthen existing RC columns has been proven experimentally and practically to be effective in solving stress-lagging effects between the original column and the new strengthening jacket caused by the pre-existing loads. This paper presents a comprehensive summary and review of PCP strengthening techniques to strengthen preloaded RC columns. The failure mode, deformability, and ductility of the strengthened RC columns are reviewed.

• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.411-425
• /
• 2020

Unreinforced masonry (URM) walls present low shear strength and are prone to brittle failure when subjected to inplane seismic overloads. This paper discusses the shear strengthening of URM walls with Textile Reinforced Mortar (TRM) jackets. The available literature is thoroughly reviewed and an extended database is developed including available brick, concrete and stone URM walls retrofitted and subjected to shear tests to assess their strength. Further, the experimental results of the database are compared against the available shear strength design models from ACI 549.4R-13, CNR DT 215 2018, CNR DT 200 R1/2013, Eurocode 6 and Eurocode 8 guidelines as well as Triantafillou and Antonopoulos 2000, Triantafillou 1998, Triantafillou 2016. The performance of the available models is investigated and the prediction average absolute error (AAE) is as high as 40%. A new model is proposed that takes into account the additional contribution of the reinforcing mortar layer of the TRM jacket that is usually neglected. Further, the approach identifies the plethora of different block materials, joint mortars and TRM mortars and grids and introduces rational calibration of their variable contributions on the shear strength. The proposed model provides more accurate shear strength predictions than the existing models for all different types of the URM substrates, with a low AAE equal to 22.95%.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.709-719
• /
• 2005

본 논문에서는 고속 근거리 데이터 전송을 위해 새로운 협동 다이버시티를 얻기 위한 실내 환경에 적합한 UWB(Ultra Wideband) MIMO(Multiple Input and Multiple Output) 채널 시스템을 제안한다. 셀과 유사하게 4개 또는 8개의 안테나를 이용하는 협동 UWB 네트워킹에 의한 다중 안테나 시스템을 고찰하였다. 먼저, 4개의 안테나를 갖는 실내 UWB 네트워킹, 이어서 4개의 안테나를 갖는 실외 UWB 네트워킹, 그리고 마지막으로 8개의 안테나를 이용하여 실외에서 실내로 향하는 이동국을 포함하는 UWB 네트워킹의 3가지 상황에 대해서 고찰한다. 본 제안에서 는 좌표(coordinate) 인터리브 시공간 부호(space time codes)와 UWB 신호가 이용된다. 이론적 상한과 시뮬레이션은 제안 알고리즘에 의해 산란 전파환경 및 상관 채널에서 간단하게 다이버시티를 달성할 수 있음을 보여주고 있다.

• Structural Monitoring and Maintenance
• /
• 제7권3호
• /
• pp.215-231
• /
• 2020

In a reinforced concrete building different shapes of column are adopted depending on the structural orientation and the architectural aspect. When there is an increase in loading due to changes in usage or revision in the design codes these columns need to be strengthened for enhanced performance during their service life. Strengthening materials such as carbon fiber and glass fiber polymer has been successfully used however, due to high cost application other alternative materials need to be explore. Galvanized steel wire mesh (GSWM) is one of the suitable materials locally available. High tensile strength, low weight, corrosion resistance, easy installation, minimum change in dimensions of the sections and cost effectives are the advantages of GSWM. Therefore, in this paper, four different shapes of column such as circular, square, rectangular and L were wrapped with different layers GSWM and jacketed with mortar. All the specimens were tested under axial compression. The objective of the study is to investigate the effectiveness of GSWM as a confining material for strengthening of column having varying shape. Test results shows that the axial strength enhanced with wrapping of GSWM jacket and a circular column presented the highest load carrying capacity and ductility as compared to the others. From the study of 22 column specimens, it is found that axial load is increased upto 20% and 19% when circular and square column are strengthened with one wrap of GSWM respectively, while a rectangular and L column required a wraps of two and three layers respectively in order to achieved the same load capacity as that of a circular column. Based on the present study, it is concluded that GSWM can be effectively used for strengthening of different shapes of concrete columns economically.