• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.102-106
• /
• 2007

YBCO films have been synthesized using a spray pyrolysis method. We used nitrates of Y, Ba, Cu as precursors. Deposition was made on $LaAlO_3$ (100) single crystal substrate by spraying the mist of aqueous precursor solution generated by a concentric nozzle. The distance between concentric nozzle and substrate was 15 cm. C-axis oriented films were obtained at deposition temperature of $740{\sim}800^{\circ}C$ and working pressure of 20 Torr. Oxygen partial pressure was 3 Torr and substrate was transported with the speed ranging from 0.23 cm/min to 0.7 cm/min by reel to reel. Scanning electron microscope (SEM) and X-ray diffraction (XRD) observation revealed that films are smooth and highly textured with (001) planes parallel to substrate. Highest critical current density (Jc) was $1.38\;MA/cm^2$ at 77K and self-field for the film with a thickness of $0.5\;{\mu}m$ prepared at a substrate temperature of $780^{\circ}C$ and $PO_2\;=3\;Torr$. The effect of temperature on the microstructure and YBCO phase formation will be discussed.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.571-580
• /
• 2011

The purpose of this study was to evaluate the effects of secondary task such as sending text message (STM) and searching navigation (SN) using the variable indicating control of vehicle ((Medial-Lateral Coefficient of Variation, MLCV), (Anterior-Posterior Coefficient of Variation, APCV)) and motion signal (Jerk-Cost function, JC). Participants included 50s taxi drivers; 14 males and 14 females. Participants were instructed to keep a certain distance (30m) from the car ahead with constant speed (80km/hr or 100km/hr). Experiement consisted of driving alone for 1minute and driving with secondary task for 1minute. Both MLCV and APCV were significantly increased during Driving + Sending Text Message(STM) and Driving + Searching Navigation(SN) than Driving only. Also, JC was increased during Driving + STM and Driving + SN than Driving only. In this study, we found that even in the experts group who are taxi driver and have 25 years driving experience, the smoothness of motion is decreased and the control of vehicle is disturbed when they were performing secondary tasks like sending text message or searching navigation.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.186-192
• /
• 2007

High $J_c\;YBa_2Cu_3O_{7-x}$ superconducting films have been fabricated $LaAlO_3(100)$ substrate by MOD method using dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. Heating rate was varied in order to optimize the calcination heat treatment condition in DCA-MOD method. Coated films were calcined at lower temperature up to $500^{\circ}C$ in flowing humid oxygen atmosphere. The heating rate was calcined from $13.3^{\circ}C/min\;to\;0.28^{\circ}C/min$. Conversion heat treatment was performed $800^{\circ}C$ for 2 h in flowing Ar gas containing 1000 ppm oxygen with a humidity of 9.45%. Surface and cross sectional SEM microstructures showed that particle sizes were increased with heating rate at a calcination step. The amount of pores was increased with heating rate in the calcined films. Dense microstructure and sharp texture were developed in an YBCO films after conversion heat treatment. A high critical current density (Jc) of $1.26MA/cm^2$ (@77 K and self-field) was obtained for the YBCO film which was prepared with a heating rate of $0.28^{\circ}C/min$.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.6
• /
• pp.432-438
• /
• 1996

Native crystalline chitin was hydrolyzed in an agitated bead reaction system using crude chitinase excreted from Aspergillus fumigatus JC-19. The reaction was enhanced significantly, and the concentration and yield of reducing sugar after 48 hours were measured to be 35.42 g/I (w/v) and 0.64, respectively, around 1.86 times higher than those of the conventional system that was carried out without glass beads. The effect of reaction conditions, such as the amounts of chitin, chitinase and glass beads, and the size of glass bead, were examined. Ball milled chitin was also hydrolyzed in the agitated bead reaction system, the conversion yield and reaction rate of ball milled chitin for 24 hours increased up to 0.87 and 48.02 g/I, respectively. Chitinase showed relatively high stability in the agitated bead reaction system, particularly in the presence of enzyme stabilizer, $Ca^{++}$, which played a critical role in preventing the deactivation of chitinase by the physical impact of glass beads. The variations of the structural features of chitin during the reaction were followed by SEM and X-ray diffraction, and the enhanced hydrolysis reaction was caused by both the fragmentation of chitin particles and the destruction of the crystalline structure owing to the synergic effects of the attrition of glass beads and the hydrolytic action of chitinase.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.129-137
• /
• 1995

AlGaAs/GaAs HBTs have been fabricated using SABM (Self-Aligned Base Metal) process technique. The mesa type HBTs were fabricated through following steps: isolation implant, wet etching, metal lift-off, and airbridge interconnection process. The fabricated HBTs with 2umx10um size emitter showed a common emitter current gain of 10 at a collector current density of Jk=100kA/cm$^{2}$, a breakdown volgate BVCEO of 8V, and the ideality factors of base and collector junctions of 1.6 and 1.1, respectively. On-wafer S-Parameter measurement at 0.5~18GHz has been made for the characterization of the common emitter HBTx with a 2umx10um size emitter. The extrapolated current gain cut-off frequency of ft=30GHz and maximum oscillation frequency of fmax=23 GHz were obtained at a collector current density of Jc=70kA/cm$^{2}$. Small signal HBT equivalent circuit was extracted from the S-Parameter data.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.4 s.42
• /
• pp.237-250
• /
• 2005

In order to clarify the effect of standard rock material in the chemical analysis of rare earth element abundance with ICP-MS, we measured rare earth element abundance of KIGAM granite standard rock material (KG-1), USGS granite standard rock material (G-2), GSJ granite standard rock materials (JG-1a and JG-2). In REE analysis, we used conventional calibration standard solutions, KG-1, JG-1a, JG-2 and G-2 as standard material, respectively. Chondrite-normalized LREE patterns of low granite standard material correspond well each other in the recommended value and the estimated value regardless of a kind of standard rock. However, the HREE patterns of the estimated value based on G-2 or JG-2 and the recommended value are different from each other. Such difference may be due to the wrong recommended value or a specific geochemical properly of the standard rock material itself, The chondrite-normalized REE patterns of four standard rock materials estimated on the basis of KG-1 or JG-1 a show little deviation compared to the those of the recommended values. This suggests that KG-1 and JG-1a may be a optimum standard material for granitoids.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.161-173
• /
• 2000

The aim of this study was to assess the effect of the frequency of the L$N_2$ infusion on the ultrastructure, metabolism and development of the embryo after freezing and thawing by computerized cell freezer. Two-cell embryos of ICR mouse were randomly allocated into fresh (control), high-frequency freezing (group 1) and low-frequency freezing (group 2). For fresh and frozen-thawed intact 2-cell embryos, total ceil number in the blastocyst was counted by fluorescent microscope after Hoechst 33258 staining. Relative amount of $H_2O$$_2$ was measured by DCHFDA. Intracellular location and membrane potential of the mitochondria were evaluated by staining with rhodamine 123 and JC-1. The structure of actin filament was also evaluated by confocal microscope. DNA fragmentation was assessed by TUNEL method after development into blastocyst. The survival rate of intact embryo was higher in group 1 than group 2 (50.7％ vs. 34.6％ respectively, p<0.05). The blastocyst developmental rate was significantly low in group 2 (86.7％, 76.7％ vs. 44.0％ for control, group 1 and group 2 respectively, p<0.05). Total cell number in the blastocyst was also significantly lower in group 2 than control (79.5$\pm$12.9, 71.6$\pm$8.0, and 62.5$\pm$4.7 for control, group 1 and group 2 respectively, p<0.05). The relative amount of $H_2O$$_2$ was higher in group 2 than other groups (15.3$\pm$3.0, 16.6$\pm$1.6 vs. 23.4$\pm$1.8, p<0.05). After JC-1 staining, relative intensity of mitochondria with high membrane potential was significantly lower in group 2 than control and group 1 (17.2$\pm$3.8, 17.4$\pm$1.3 vs. 13.2$\pm$2.0, p<0.05). In group 2, partial deletion and aggregation of the actin filament was found. DNA fragmentation rate was also hieher for group 2 versus other groups (30.8％, 36.0％ vs. 65.6％, p<0.05). The frequency of the L$N_2$ infusion is an important factor for the development of frozen-thawed mouse embryo. High-frequency infusion may prevent damages of cytoskeleton and mitochondria in the embryo probably by preventing the temperature fluctuation during dehydration phase. We speculate that the application of high-frequency infusion method in human embryo may be promising.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.26-32
• /
• 2017

Antimicrobial activity of 6 phosphate compounds as $H_3PO_3$, $H_3PO_4$, $K_3PO_4$, $K_2HPO_4$, $KH_2PO_4$ and $NH_4H_2PO_4$ against Phytophthora capsici JHAW 1-2 and Colletotrichum acutatum JC24 was investigated in this study. Inhibitory effect on zoospore release, zoosporangia germination and zoospore germination was superior than mycelial growth. Among 6 compounds, $H_3PO_3$ and $H_3PO_4$ showed the best antimicrobial activity against P. capsici JHAW 1-2. Diseases controlling activity of the phosphate compounds tested on seedling and fruit of pepper against Phytophthora blight was also better than those against anthracnose. When $H_3PO_3$ was applied to the pepper seedlings at a concentration of $100{\mu}g\;mL^{-1}$, severe phytotoxicity was occurred. However, with applying $10{\mu}g\;mL^{-1}$ of $H_3PO_3$ showed 100% the disease control efficacy. In case of $100{\mu}g\;mL^{-1}$ $H_3PO_4$ application showed excellent antimicrobial activity against P. capsici JHAW 1-2, and 56.7% of the disease control efficacy with no phytotoxicity. To investigate the control efficacy against anthracnose, conidia suspension was inoculated with non-wound and wound inoculation method on pepper fruit. Among 6 compounds, only $100{\mu}g\;mL^{-1}$ of $H_3PO_3$ and $H_3PO_4$ had a activity of more than 70%, but the control activity on other treatments was minimal or unacceptable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.3-3
• /
• 2009

In order to investigate the possibility of using mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ (NEG123) as the superconducting layer of the HTS coated conductor, the NEG123 thin film was deposited epitaxialy on LAO(100) single crystal and IBAD_YSZ metal templates by pulsed laser deposition. Systematic studies were carried out to investigate the influences of deposition parameters of PLD on the micro structure, texture and superconducting properties of NEG-123 coated conductor. Deposition at oxygen partial pressure of 600 mTorr was needed to routinely obtain high quality NEG123 films with $J_c$'s (77K) over 2 MA/$cm^2$ and Tc's over 90K (${\Delta}T{\sim}2\;K$). We verified from magnetization study that the NEG123 has an improved in-field Jc as the field increases at temperatures between 10 K and 77 K compared with Gd123. The $J_c$ (77K, self field) and the value of onset $T_c$ of NEG123 thin film on LAO substrate was $4.0MA/cm^2$ and 92K, respectively. This is the first report, to the best of our knowledge, of coated conductors with NEG123 film as the superconducting layer which have Ic and Jc over 40 A/cm-width and 1.6 MA/$cm^2$ at 77K, self field. This study shows the possibility of using NEG123 film as the superconducting layer of the HTS coated conductor which can be used in high magnetic field power electric devices.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.731-734
• /
• 2001

An efficient fermentation strategy for the high level production of ultra-high-molecular weight poly(3-hdyroxybutyrate) (PHB) was developed. Although the cell and PHA concentrations obtained by flask cultures at different initial pH (6.0 or 6.9) were almost same level, the molecular mass of PHB produced were quite different along with the initial pH. When a recombinant Escherichia coli XL1-Blue harboring pJC2 containing the Alcaligenes latus PHB biosynthesis genes was cultivated in flask culture (pH 6.0), the PHB having a very high molecular weight of 22 MDa could be produced while only below 1 MDa at initial pH 6.9. The ultra-high-molecular weight PHB could be synthesized to high concentration of 89.8 g/L resulting in the PHB productivity of 2.07 g/L-h by simple fed-batch culture. In this study, we report that PHB having various molecular mass can be produced by employing metabolically engineered E. coli strains harboring the plasmids of different copy numbers containing the A. latus phbCAB genes.