• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.18-18
• /
• 2010

Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. With UHV gauges of uncertainties less than 15% and a calculated conductance of the orifice, about 35% of pumping speed uncertainties are experimentally derived in the pressure range of less than $10^{-6}$ mbar. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced an SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-3}$ mbar-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to less than $10^{-6}$ mbar with an uncertainty of 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.

• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.269-274
• /
• 2010

The purpose of this study was to develop the FSR sensor suit that controls walking assist device for paraplegic patients. The FSR sensor suit was to detect user's intent and patterns for walking by measuring pressure on the palm and the sole of user's foot. It consisted of four modules: sensing pressure from palm, changing modes and detecting pressure on the palm/at the wrist, sensing pressure from the soles of user's foot, and host module that transmit FSR data obtained from sensing modules to PC. Sensing modules were connected to sensing pads which detect analog signals obtained from the palm or the sole of foot. These collect signals from the target regions, convert analog signals into digital signals, and transmit the final signals to host module via zigbee modules. Finally, host modules transmit the signals to host PC via zigbee modules. The study findings showed that forces measured at the palm when using a stick reflected user's intent to walk and forces at the sole of the user's foot revealed signals detecting walking state.

• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.310-315
• /
• 2010

Estimation of muscle forces is important in biomechanics, therefore many researchers have tried to build a muscle model. Recently, optimization techniques for adjusting muscle parameters, i.e. EMG-driven model, have been used to estimate muscle forces and predict joint moments. In this study, an EMG-driven model based on the previous studies has been developed and isometric and isokinetic contraction movements were evaluated to validate the developed model. One healthy male participated in this study. The dynamometer tasks were performed for maximum voluntary isometric contractions (MVIC) for ankle dorsi/plantarflexors, isokinetic contraction at both $30^{\circ}/s$ and $60^{\circ}/s$. EMGs were recorded from the tibialis anterior, gastrocnemius medialis, gastrocnemius lateralis and soleus muscles at the sampling rate of 1000 Hz. The MVIC trial was used to customize the EMG-driven model to the specific subject. Once the subject's own model was developed, the model was used to predict the ankle joint moment for the other two dynamic movements. When no optimization was applied to characterize the muscle parameters, weak correlations were observed between the model prediction and the measured joint moment with large RMS error over 100% (r = 0.468 (123%) and r = 0.060 (159%) in $30^{\circ}/s$ and $60^{\circ}/s$ dynamic movements, respectively). However, once optimization was applied to adjust the muscle parameters, the predicted joint moment was highly similar to the measured joint moment with relatively small RMS error below 40% (r = 0.955 (21%) and r = 0.819 (36%) and in $30^{\circ}/s$ and $60^{\circ}/s$ dynamic movements, respectively). We expect that our EMG-driven model will be employed in our future efforts to estimate muscle forces of the elderly.

• Plant Biotechnology Reports
• /
• v.4 no.4
• /
• pp.293-301
• /
• 2010

The feasibility of two strategies for transgene pyramiding using Agrobacterium-mediated transformation was investigated to develop a transgenic potato (Solanum tuberosum L. cv. Iwa) with resistance to potato tuber moth (PTM) (Phthorimaea operculella (Zeller)). In the first approach, cry1Ac9 and cry9Aa2 genes were introduced simultaneously using a kanamycin (nptII) selectable marker gene. The second approach involved the sequential introduction (re-transformation) of a cry1Ac9 gene, using a hygromycin resistance (hpt) selectable marker gene, into an existing line transgenic for a cry9Aa2 gene and a kanamycin resistance (nptII) selectable marker gene. Multiplex polymerase chain reaction (PCR) confirmed the presence of the specific selectable marker gene and both cry genes in all regenerated lines. The relative steady-state level of the cry gene transcripts in leaves was quantified in all regenerated lines by real-time PCR analysis. Re-transformation proved to be a flexible approach to effectively pyramid genes for PTM resistance in potato, since it allowed the second gene to be added to a line that was previously identified as having a high level of resistance. Larval growth of PTM was significantly inhibited on excised greenhouse-grown leaves in all transgenic lines, although no lines expressing both cry genes exhibited any greater resistance to PTM larvae over that previously observed for the individual genes. It is anticipated that these lines will permit more durable resistance by delaying the opportunities for PTM adaptation to the individual cry genes.

• The Journal of Korean Society for School & Community Health Education
• /
• v.11 no.2
• /
• pp.129-140
• /
• 2010

Objectives: The purpose of this study is to be conducive to selecting effective educational method for AED(Automated External Defibrillator) education through comparing educational effects between VSI(Video Self-Instruction) and lecturer-centered learning on AED(Automated External Defibrillator) in undergraduates. Method: This study targeted totally 76 undergraduates (39 people for experimental group, 37 people for control group) at J university where is located in J province, from June 8, 2009 to June 12. The analytical method was performed by using SPSS WIN 12.0 Version program. Results: In difference before and after education of the skill performance accuracy in AED between groups, the experimental group(2.89) was higher compared to the control group(2.75). In difference before and after education of knowledge in AED between groups, the experimental group(2.03) was higher compared to the control group(1.82). In difference before and after education of attitude toward AED between groups, the control group(2.14) was higher compared to the experimental group(1.85). In difference before and after education of self-confidence in AED between groups, the experimental group(1.88) was higher compared to the control group(1.76).

• Health Policy and Management
• /
• v.26 no.4
• /
• pp.333-342
• /
• 2016

Background: The use of therapeutic materials based on new health technology has increased in recent years in the field of medicine, raising concerns for medical practitioners regarding increased spending on the new therapeutic materials amid the rapid population ageing and increase of chronic diseases in Korea. While therapeutic materials have significant importance in the health care system, they have not been given appropriate attention in the academic world of Korea. The purpose of this study is to identify factors that affect the growth of expenditure on therapeutic materials and to derive implications for an effective management considering the diversity of therapeutic materials. Methods: Using the claims data of the National Health Insurance Services, specific utilization patterns of groups of therapeutic materials in the middle classification level of Health Insurance Review and Assessment Service from 2007 to 2014 were analyzed. Four categories (J5083: drug eluting coronary stent, D0302: nonmetallic anchor, K6014: gauze, K6023: gauze) that exhibit unique patterns with respect to price and volume were selected. Then, decomposition analysis was performed to identify the largest contributor to the spending growth by dividing the products into existing, new, and abandoned products for the period between 2010 and 2013. Results: The effect of new products had larger impact on spending growth than the effect of core items in drug eluting coronary stent (J5083) and nonmetallic anchor (D0302). In addition, existing products in general included items priced relatively lower when compared with another item manufactured by the same company. In the gauze category, however, existing products had the largest impact on expenditure and the effect of volume was greater than that in other categories. Conclusion: This study provides evidence that appropriate management measures classified by the characteristics of therapeutic materials are required for therapeutic materials pricing and reassessment in Korea.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.94-99
• /
• 2010

340 nm UV radiation of $2500\;kJ/m^2$ irradiated a thermoplastic elastomer (TPE) specimen used for interior and exterior materials of a car. After the UV irradiation, the black sample surface was changed to gray. Materials on the aged sample were collected and analyzed using GC/MS, but significant materials were not found. Lots of small cracks were found on the aged specimen surface. Whitening phenomenon of the aged sample disappeared by brushing or searing with a fire on the aged surface. After brushing or searing with a fire, small cracks on the surface vanished. Samples before and after the aging, and the treated samples with brush or fire were analyzed using image analyzer, SEM, EDX, and ATR and the results were compared. The vanished whitening phenomenon by brushing or searing was explained with filling the small cracks by polypropylene of TPE.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.34-41
• /
• 2010

This work is concerned with the analysis of stress corrosion cracking(SCC) behavior of Alloy 600 nozzle penetration mock-up according to a residual stress induced by a dissimilar metal welding(DMW) in a nuclear reactor pressure vessel. The effects of the dimension and materials of the nozzle penetration on the deformation and the residual stress induced by DMW were investigated using a finite element analysis(FEA). The inner diameter(ID) change of the nozzle by DMW and its dependance on the design variables, calculated by FEA, were well consistent with those measured from the mock-up. Accelerated SCC tests were performed for three mock-ups with different wall thicknesses in a highly acidic solution to investigate mainly the effect of the residual stress on the SCC behavior of Alloy 600 nozzle. From a destructive examination of the mock-up after the tests, the SCC behavior of the nozzle was fairly related with the residual stress induced by DMW : axial cracks were found in the ID surface of the nozzle within the J-weld region where the highest tensile hoop stress was predicted by FEA, while circumferential cracks were observed beyond both J-weld root and toe where the highest tensile axial stress was expected.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2010

The combination of medical devices and IT convergence technology has made it possible to check health whenever and wherever people want. The recent development of various Ubiqutous Healthcare medical devices ensures the convenient measurements of health variations in daily lives and at home. However, considering that there is a growing prevalence of the devices and a great interest in the development of Ubiqutous Healthcare device, it is urgent to secure the stability and to establish performance evaluation. Therefore, it is needed to develop standard testing methods for the stability and the performance evaluation on before and after selling products. In this paper, I studied the standard testing method of both compulsory tests and performance evaluation which are for the electric stability evaluation on Ubiqutous Healthcare devices.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.223-229
• /
• 2010

We investigated the effects of processing geometry of silica-filled isobutylene-isoprene rubber (IIR) compounds on its mechanical properties and silica dispersion, using a two roll mill and an internal mixer (banbury mixer). The compound processed with the two roll mill showed the longer induction time ($t_2$), higher maximum torque ($T_{max}$), and better silica dispersion than the compound processed with the internal mixer; however, showed slightly the lower cure index ($t_{90}$). The mechanical properties (hardness, 300% modulus, tensile strength, elongation) of the compound processed with two roll mill were higher than compound done with the internal mixer.