• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.423-427
• /
• 2001

This paper describes a control scheme for direct torque and flux control of Induction machines using space vector modulation. The proposed predictive flux control scheme has directly calculated the reference voltage space vector based on Stator flux errors in order to control the torque and flux. This proposed control scheme has not the requirement of a separate current error, thereby improving transient performance and also has the advantage of less torque ripple in steady state with a fixed switching period. The effect of proposed method has been proven by simulations. It is concluded that the proposed control topology produces better results for steady state operation than the classical direct torque control.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.109-118
• /
• 1991

Steady-state sublimation vapour pressures of anhydrous bismuth triiodide have been measured by the torsion-effusion method from 488.8 to 570.5 K and equilibrium sublimation pressures were obtained from the steady-state data. The standard sublimation enthalpy changes derived by both second(modified sigma function) and third(average enthalpy method) law methods were 159.316${\pm}$0.055, 137.67${\pm}$1.43 kJ$.$mol-1 respectively. The standard sublmation entropy change derived by modified sigma function was 232.88${\pm}$0.10 J$.$K-1$.$mol-1. The reliable standard sublimation enthalpy change based on a correlation of {{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K) and {{{{ { TRIANGLE }`_{cr } ^{g } }} S{{{{ { 0} atop {m } }}(298.15K), a recommended p(T) equation has been obtained for BiI3(cr) ; lg(p/Pa)=-(C$.$K/T)+5.071lg(T/K)-2.838${\times}$10-3(T/K)-7.758${\times}$103(K/T)2+1.4519 where C={{{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K)/0.019146 kJ$.$mol-1}-456.27.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.234-239
• /
• 2000

The capillary pumped cooling system (CPCS) is a cooling system which controls temperature of the small electronic devices, such as IC device systems, notebook computers, etc. An important feature of CPCS is that a working fluid circulates in a system by capillary force in tubes instead of mechanical input power. The cooling effect of CPCS is investigated with respect to heat flux, condensation temperature under different working fluids (water, ethanol, methanol). Capillary pumped flows are visualized under various conditions and mass flow rate and temperature are experimentally measured. It is shown that the increasing tendency of mass flux for each working fluid is observed as the temperature of evaporator increases, and that the cooling possibility of CPCS depends on the performance of evaparator and condenser which sustains the steady state temperature continuously.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1019-1021
• /
• 1999

In this paper, we describe the design and appliance of the preventive diagnostic expert system of gas in oil for power transformer. This expert system is developed to use expert system development tool; Element Expert (NEURON DATA Inc.) Analysis is developed by four diagnose methods. In first, the standard of KEPCO is applied. It classifies the state of transformer by four level: Normal, warning, abnormal and danger. And the others are gas pattern methods, IEC code method, and Dornen & Roger Ratio method and applied later. These latter methods analyse the cause of result. Inference engine was designed with Element Expert. In last, we operate the system with sample data and we can obtain the correctly inferred result for the state of transformer.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.223-224
• /
• 1998

RGDF immobilized micro-patterned surface was developed to detect the functional state of platelets. Using photolithographic technology, an RGDF micro-patterned surface was prepared on silicon wafer. Platelet adhesion to this surface was observed by fluorescence microscopy after staining platelets with mepacrine. Nonactivated platelets pretreated with $PGE_1$ interacted incompletely with the RGDF micro-patterned surface, whereas activated platelets treated with ADP interacted with the surface extensively. These results show that the distinct selectivity of an RGDF-immobilized micro-patterned surface can be used to detect the functional state of platelets.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.61-62
• /
• 2000

We have studied the molecular orientation by the phase transitions of the chiral smectic liquid crystals, 4-(1-Trifluoromethyl-6-ethoxy-hexyloxycarbonlphenyl)-4-nonyloxybiphenyl-4-carbo-xylate (R-TFMEOHPNBC) to seek the original solution of the zig-zag defect using two different experimental techniques; optical system and x-ray scattering. The phase sequence is gamma ferroelectric $(SmC{\gamma}\;^*)$ ${\rightarrow}$ smectic A (SmA) ${\rightarrow}$ isotropic (I). Existence of two layer spacing at chiral smectic phase gives a possibility of the molecular orientation in two different tilt angles, ${\theta}\;_1$ and ${\theta}\;_2$, which are separated each other to the layer normal at a given temperature. The gamma ferroelectric-like phase is, first, discovered in the single compound.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.47-57
• /
• 1998

Characteristics of evaporation, flame propagation at moment of ignition and steady state combustion, and flow characteristics of combustible mixture have been investigated by experiments and computational simulation for the evaporation pot type kerosene burner. The results show how to design the evaporation pot in order to minimize the sticking of residual tar, and also indicate that symmetrical flame propagation along the flame ring from the kernel of ignition is achieved by modication of the shape of ignition part. In the case of steady state combustion, the uniform distribustion of flame at each flame hole is accomplished by proper modification of the piping instruments. The improved design of the structure and parts of the kerosene burner make up enhancement of flame stability and considerable reduction of CO and bad smell emission at moment of ignition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.441-445
• /
• 2009

In this paper we propose the method of generating the maximum length sequence based on Self Programmable Cellular Automata. Recently there is a research trend such that increased CA dimensionality and PCA which applies different rules on the same cell at different time steps can make a sequence with a long period. By changing a cell's state transition rules to give the cell dynamic energy at each time step, we can make the period of a sequence longer and the randomness of a sequence higher.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1781-1791
• /
• 1991

For the cracked plate under transient temperature distribution, J-integral is expressed in the form of line integral by using convolution integral. The J$_{1}$ integral is calculated for a through line center cracked steel plate under thermal and mechanical loading conditions and the calculated values are in good agreement with previous results. The effect of inertia term on the J$_{1}$ integral is not negligible for a glass but for a steel. For the glass plate, the rates of J$_{1}$ integral value to time increase if the values of material properties such as specific heat, thermal conductivity, thermal diffusivity and Young`s modulus as well as crack length and temperature difference in cracked edge increase.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.477-483
• /
• 2005

This article describes a robust state estimation method which enables to produce reliable estimates in spite of heavy perturbation including plant uncertainty and external disturbances. The main idea is to combine the standard state estimator with the perturbation observer in the estimator frame. The perturbation observer reflects equivalent quantity of plant uncertainty and external disturbances during the estimation process so that the state estimator dynamics gets as close as possible to the real plant dynamics. The robust state estimator proposed in this paper is given in a recursive discrete-time form which is very useful fur implementation purpose. In terms of the error dynamics derived for the robust state estimator, we discuss the stability issue and noise sensitivity. The effectiveness and practicality of the robust state estimator are verified through numerical examples and experimental results.