• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.646-655
• /
• 1990

A practically useful system for elastic-plastic fracture mechanics analysis has been developed. The developed system is comprised of the deformation plasticity failure assessment diagram(DPFAD) approach and the J-integral/Tearing modulus(J/T) approach. The system contains analysis routines for five types of fracture specimens : compact tension, center cracked tension, single edge craked plate in uniform tension, single edge cracked plate in three point bending and double edge cracked plate in tension. A double interpolation scheme was adopted to interpolate J values from the EPRI developed EPFM handbook and the Newton-Raphson method was used to obtain proper loadings for displacement control conditions. A graphic output system was utilized to present numerical results. Several case studies were performed to evaluate the accuracy and the usefulness of the code. It was found that the J/T approach and the DPFAD approach yielded similar results. However, the DPFAD approach is more convenient for qick assessment of integrity of cracked structures while the J/T approach is more useful in evaluating the full history of the fracture process.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.112-112
• /
• 2009

레이저 용접은 아크 용접에 비해 상대적으로 빠른 용접과 깊은 용입이 가능하며, 낮은 열입력을 가지는 장점이 있다. 하지만 알루미늄 합금 용접 시 균열 감수성의 증가 및 용접강도가 저하되는 단점을 가지고 있다. 이러한 단점을 극복하는 방법으로 모재의 화학조성을 제어하는 방법과 부가적인 용접와이어를 공급하는 방법이 제안되었으나 레이저 용접에 적용하기 쉽지 않다. 아크 용접과 전자빔 용접에서는 열원에 오실레이션을 적용하여 결정립 구조를 제어하여 용접강도를 증가하는 방법이 제안되었다. 따라서 본 연구에서는 알루미늄 합금 5J32-T4의 용접균열 저감 및 용접강도 향상을 위해 레이저 위빙을 적용하였다. 1mm 두께의 알루미늄 5J32-T4를 사용하였으며, 4kW급 디스크 레이저와 레이저용 스케너를 이용하여 레이저 위빙을 구현하였다. 고온균열을 평가하기 위해 자기구속형 균열 평가방법을 사용하였으며, 용접강도를 평가하기 위해 겹치기 용접을 수행한 시편을 이용하였다. 고온균열 실험결과 레이저 위빙 적용 시 직선 용접에 비해 균열 감수성이 감소한 것을 확인하였다. 전단인장강도 측정결과 레이저 위빙의 적용에 따라 직선 용접에 비해 높은 전단인장강도의 확보가 가능하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1737-1744
• /
• 2009

This study calculated the relative importance between evaluation factors of websites focused on culture and tourism in J region by 3C_D_T evaluation model of website. That is, this paper was analyzed by AHP (analytic hierarchy process) and calculated the relative weights and preference. In conclusion, this study showed that content was the most important factor and proposed the improvement planning through sensitivity analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• Electronics and Telecommunications Trends
• /
• v.13 no.2 s.50
• /
• pp.53-66
• /
• 1998

본 고에서는 ITU가 수행해 온 음성 부호화 표준의 역사 그리고 1996년 ITU-T에서 승인된 8kbit/s 음성 부호화 표준인 CS-ACELP의 구성에 대해서 분석하였다. 또한, 미래 유, 무선 통신 시스템에 있어서 핵심 음성 부호화 기술로 자리잡게 될 CS-ACELP의 품질평가와 주요 애플리케이션을 살펴보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.757-764
• /
• 2014

In this study, the effect of shape parameters on the J-R curves of curved CT specimens was evaluated using the limit load method. Fracture toughness tests considering the shape factors L/W and $R_m/t$ of the specimens were also performed. Thereafter, the J-R curves of the curved CT specimens were compared using the J-integral equation proposed in the ASTM (American Society for Testing and Materials) and limit load solution. The J-R curves of the curved CT specimens were also compared with those of the CWP (curved wide plate), which is regarded to be similar to real pipe and standard specimens. Finally, the effectiveness of the J-R curve of each curved CT specimen was evaluated. The results of this study can be used for assessing the applicability of curved CT specimens in the accurate evaluation of the fracture toughness of real pipes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.729-736
• /
• 2015

In this study, the effects of specimen size and side-groove on the results of the J-R test for leak-before-break (LBB) evaluation were investigated. A series of J-R tests were conducted at both RT and $316^{\circ}C$, using three different sizes of compact tension (CT) specimens machined from SA508 Gr.1a piping material: 12.7 mm-thick 1T-CT, 25.4 mm-thick 1T-CT, and 25.4 mm-thick 2T-CT with and without side-groove. The results showed that side-grooving reduced the J-R curve for all specimens and the effect of side-grooving was more significant at $316^{\circ}C$ than at RT. As the thickness of the specimens decreased and the width of the specimens increased, the J-R curve slightly decreased at RT but it increased at $316^{\circ}C$. However, the variation in the J-R curve of SA508 Gr.1a with the thickness and width of CT specimen was insignificant.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.50-51
• /
• 2007

과거 단일 회사로 구성된 전력산업 체제하에서의 신뢰도에 대한 인식과 중요성들이 전력시장과 경쟁이 도입된 다각화된 이해 주체들 이 존재하는 현행의 국내 전력산업 구조에서는 서로 다른 양상을 띄고 변화하고 있다. 전원 및 송?변전 시설계획에서부터 계통운영 계획 및 실시간 급전에 이르기까지 연속선상의 계통운영 업무에 있어 전력공급의 안정성 확보와 더불어 보다 합리적이고 효율적인 또는 경제적인 계획과 운영에 대한 요구(Needs)가 기존의 결정론적인 신뢰도 평가의 다각적 접근 즉, 확률론적인 신뢰도평가 기법을 개발하게 하였으며, 이에 미국 전력중앙연구소(EPRI)의 PRA(Probabilistic Reliability Assessment) S/W를 도입하여 실제 계통운영의 단위업무와 접목하여 리스크를 고려한 계통안전도평가 구현의 잠재적 가능성과 극복해야 할 한계를 파악하였다.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.41-46
• /
• 2004

The influence of pollutant loads on the water quality in Jeongeupcheon of Dongjin river was evaluated from Jan. 2002 to Dec. 2003 for two years. The range of pH in water was $6.87{\sim}7.53$. The EC level in upstream ranged from 83 to $95\;{\mu}s/cm$ with the highest value in autumn. The BOD level in upstream rang ed from 0.61 to 1.27 mg/L, which would be I grade according to water quality criteria by Ministry of Environment, but that in downstream was III grade. The average T-N level in midstream ranged from 6.10 to 10.84 mg/L which was the highest values throughout the stretch of the river. The average T-P levels ranged from. 0.41 to 0.98 mg/L Jeongeupcheon was suitable for the agricultural usage based upon one year analysis of river water quality. The effluent loads of BOD was high in midstream (J4) with 553 kg/day. The major sources of T-N loads were livestock, population, land use, and industry in order. The effluent loads of T-N was high in J4 by population and industry while that of T-N was high in J5 and J6 by livestock and land use. The delivered loads of T-N was high in downstream The delivered loads of T-P was low as compared with those of BOD and T-N. The delivery ratio of T-N ranged from 6 to 38%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.344-349
• /
• 1998

고리 1호기 원전의 원자로냉각재 배관의 파단전누설개념 적용성을 평가하기 위하여 일반적인 파단전누설 절차 및 기준을 검토하였다. 파단전누설 타당성을 검토하기 위하여는 한계하중방법 및 J-T 방법을 비교검토 하였다. 그리고 원자로냉각재 배관에 대해서는 탄소강일 경우와 스테인레스강에 대하여 분석하였고, 가압기 밀림관에 대해서는 열응력을 계산하였다. 그리고 원자로 냉각재 배관에 가상의 관통균열의 파괴안전성은 유한요소법을 이용한 탄소성파괴역학을 통하여 분석하였다. 분석결과 한계하중법과 J-T 방법 모두 스테인레스강과 탄소강재질에 대해 적용 가능한 것으로 나타났다.