• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.539-546
• /
• 2016

본 연구에서는 C(T) 시편 측면 홈의 유무에 따른 J-R 곡선의 변화가 유한요소 손상해석의 모델변수 결정에 미치는 영향을 알아보았다. 손상해석은 수정 응력 파괴변형률 모델을 이용하였다. C(T) 시편은 SA508 Gr. 1a 배관재에서 채취하였고 일부에 측면 홈이 가공되었다. 시험은 상온과 원전 운전 온도인 $316^{\circ}C$에서 각각 수행되었으며, 시험 결과 얻은 J-R 곡선을 모사하여 손상모델 변수를 얻었다. 그 결과, 측면 홈의 유무에 따른 J-R 곡선의 변화는 손상모델 변수 결정에 영향을 주지 않음을 확인하였다.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.127-133
• /
• 2007

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. It is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases a phenomenon of the tunneling and shear lip by the side groove.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.215.1-215.1
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.937-938
• /
• 2010

• 유공압시스템학회논문집
• /
• 제4권4호
• /
• pp.15-20
• /
• 2007

All of the hydraulic spool valves adopt radially grooved spools to avoid hydraulic locking. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the accurate Poiseuille flow characteristics inside single groove. The stream lines, velocity and pressure distributions are obtained for various groove widths, depths and shapes. The stream lines are highly affected by groove shape and there occurred large vortexes inside groove beyond a certain ratio of groove width to depth. Especially the U shaped groove restrains the occurrence of vortex. Therefore the numerical method adopted in this paper can be use in optimum designing of multi-grooved hydraulic spool valves.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.415-418
• /
• 2008

We propose a criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis. Fundamental idea introduced in the criterion is to examine the difference between flat rolling which don't' cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod and bar mill of SEAH BESTEEL Inc. A new design for 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion in this study could point out the location of wrinkle initiation during groove rolling and could reduce onset of wrinkle on final products.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.350-356
• /
• 2001

SG-50 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the J$_{IC}$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.e.

• 소성∙가공
• /
• 제17권5호
• /
• pp.328-336
• /
• 2008

A criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis is proposed. Fundamental idea considered in the criterion is using the difference between flat rolling which don't cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod mill of SEAH BESTEEL Inc. A new design of 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion could point out the location of wrinkle initiation and could reduce onset of wrinkle.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.197-198
• /
• 2002

In order to produce micromachined parts with a great dimensional accuracy, it is important to clarify the influence of heterogeneity and/or discontinuity of workpiece materials on the micromachining process, because almost all structural materials are composed of heterogeneous and/or homogeneous crystal grains at the micro scale. Experiments where JIS S25C steel had been scratched with a diamond triangular pyramid indenter were conducted under a field emission scanning electron microscope (FE-SEM). The difference of plastic deformation at a groove scratched between a pearlite zone and a proeutectoid ferrite zone was investigated through comparison with the groove scratched of a pearlite zone and a proeutectoid ferrite zone.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.75-80
• /
• 2001

The elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the material tearing modulus and characterizes the crack tip field under the plane stress and strain. SG-365 steel is observed that J-R curve and Tmat value decrease as 0%, 20%, 30%, and 40%. The 40% side grooved specimen is very useful in estimation of the $J_IC$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides. it improves the accuracy of toughness values, decreases the scattering the them and tunneling and shear lip by the side groove. Applicability of tearing modulus($T_J$ proposed by paris et al as instability panameter for this material is investigated.