• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.4
• /
• pp.309-316
• /
• 2000

The objective of this experiment was to evaluate chemical composition, dry matter(DM) digestibility, DM intake, relative feed value(RFV) and hay grade of imported roughage which was collected by wholesale dealer at Chungnam province in 1999. Experimental roughages includes 8 kinds of imported hays(com stover bale, tall fescue straw, green cell, bermudagrass straw, reed camarygrass straw, alfalfa bale, sugarcane bale and oat hay) and mixture hay(contro1) which was harvested at Chungnam National University experimental field. Compared with mixture hay(contro1) except for alfalfa bale, crude protein of most imported roughage was low, but NDF, ADF, cellulose and lignin compound were high. Futhermore, DM digestibility, DM intake, RFV and hay grade of imported roughage except for alfalfa bale was significantly lower than those of mixture hay(control)(P<0.05). Therefore, it is necessary to evaluate the economic value in the aspect of quality for the imported roughages. (Key words : Imported roughage, RFV, Hay grade, Nutritive value)

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.7
• /
• pp.927-930
• /
• 2006

This study was conducted to investigate potential effects of previously identified QTL regions on carcass traits in Hanwoo. The data analyzed in this study was collected from 326 steers of 67 proven sire. Thirteen micorsatellite markers spanning QTL regions on bovine chromosomes 1 and 14 were genotyped in 326 steers. The following breeding values were analyzed for QTL effects. Cold carcass weight breeding value (CCWBV), longissimus muscle area breeding value (LMABV), marbling score breeding value (MSBV) and backfat thickness breeding value (BFTBV). Chi-square tests were performed to compare frequencies of individual allele between high and low breeding value groups. Significant differences of allele frequencies in BMS711, MCM130, BMS4049, and BMS2263 were found. And also, in RM180, BL1029, BM4305, and BMS2055 there were significant differencies of allele frequencies. These results showed a potential application for investigation of putative QTL locations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.378-382
• /
• 2008

Since the sheet metal forming of Mg alloy is perform at elevated temperature, the effect of strain rates related with the forming temperature and forming speed and R-value is very important factor for formability and forming limits and deep drawing. It is investigated that the effect of material properties such as various temperature, forming speed and strain rates on formability and R-value of Mg alloy sheet in round cup deep drawing. Therefore, the investigation for process variables is necessary to improve formability and forming limits and deep drawing. Also, the effects of strain rate and drawbility were studied by the experiment. The temperature, forming speed, and strain rates and R-value are investigated. Forming of Mg alloy takes consider into temperature, proper forming speed and strain-rate and R-value the formed parts were good without defects for forming limits and deep drawing.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.60-67
• /
• 1998

In this study, the J-Resistance Curve and material tearing modulus of SA508-C3 steel, which is one of the used nuclear pressure vessel steel, are measured ar room temperature, $200^{circ}C$ and $300^{circ}C$ according to load ratio analysis and ASTM E813, ASTM E1152, respectively. It is observed that J-R curve and Tmat value decrease as the temperature level increase. Applicability of $T_j$ proposed by Paris et al as instability parameter for ductile material is investigated. It is concluded that results are the $T_j$ parameter may be used as a crack instability parameter.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.264-266
• /
• 2004

for the kぉ mechanics analysis of a crack in a weld of dissimilar steels, residual stress analysis and fracture analysis must be performed simultaneously. The standard definition of the J-integral leads to a path dependent value in the presence of a residual stress field. And unlike cracks in homogeneous materials, a bimaterial interface crack always induces both opening and shearing modes of stress in the vicinity of the crack tip. Therefore, it is necessary to develope a path independent J-integral definition for a crack in a residual stress field generated by welding of dissimilar steels. This paper addresses the modification of the Rice-J-integral to produce a path independent J-integral when residual stresses due to welding of dissimilar steels and external forces are present. The residual stress problem is heated as an initial stain problem and the J-integral proposed for this class of problems is used And a program which can evaluate the 1-integral for a crack in a weld of dissimialr steels is developed using proposed J-integral definition.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.598-603
• /
• 2012

Beef qualities which can be properly predicted by time-temperature integrator (TTI), a chromatic indicator, were selected in terms of its similarity of temperature dependence between beef qualities and TTI, denoted by Arrhenius activation energy ($E_a$). The high similarity is required to afford accurate prediction. A devised enzymatic TTI based on laccase (an oxidase), which catalyses the oxidation on 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid) producing color development, was applied. The factors of beef quality, such as volatile basic nitrogen (VBN), pH, color (CIE $L^*$, $a^*$), Warner-Bratzler shear force (WBSF), Pseudomonas spp. count, and lactic acid bacteria (LAB) count were considered for the selection. $E_a$ (55.48 kJ/mol) of the TTI was found to be similar to those of the beef qualities (all referred) in the order of LAB count (53.54 kJ/mol), CIE $a^*$ value (61.86 kJ/mol), pH (65.51 kJ/mol), Pseudomonas spp. Count (44.54 kJ/mol), VBN (67.98 kJ/mol), WBSF (40.67 kJ/mol), and CIE $L^*$ value (33.72 kJ/mol). The beef qualities with more similar $E_a$ to that of the TTI showed less difference between real and TTI predicted levels. In conclusion, it was found out that when applying TTI to food packages, their $E_a$ similarity should be checked to assure accurate estimation of food quality levels from TTI response.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.48-54
• /
• 2008

Underwater wet arc welds of rolled steel plate (SM41) where studied welding and mechanical properties macro and narrow than that of the other things. Tensile strength of UWEB obtained to 521.5 MPa and of USBL was 524.1 MPa, but the highest elongation value was 4.68 %(UWEB). Bending strength(1166.6 MPa) of USBL is the largest and of UWEB in 1047 MPa, But deflection(22.73 mm) of UWEB in large than that of USBL(22.63 mm). Impact value(144.36 $J/cm^2$) of JPUW is the largest and of UWEB(140 $J/cm^2$) come after.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.473-480
• /
• 2008

Sheet metal forming of Mg alloy is usually performed at elevated temperature because of the low formability at room temperature. Therefore, strain rates affected with the forming temperature and speed must be considered as important factor about formability. Effects of process parameters such as various temperatures and forming speeds were investigated in circular cup deep drawing. From the experimental results, it is known that LDR (Limit Drawing Ratio) increase as the strain rate increase. On the contrary, the FLD (Forming Limit Diagram) shows lower value as faster strain rate. Therefore, anisotropy values are investigated according to the temperature and strain rates at each forming temperature. R-values also represent higher value as faster strain rate. It is known that the formability can be different with the deformation mode on warm forming of AZ31 alloy sheet.

• Journal of applied mathematics & informatics
• /
• v.36 no.1_2
• /
• pp.39-50
• /
• 2018

In this paper, we deal with the uniqueness problem for the power of p-adic meromorphic functions. The results obtained in this paper are the p-adic analogues and supplements of the theorems given by Yang and Zhang [Non-existence of meromorphic solution of a Fermat type functional equation, Aequationes Math. 76(2008), 140-150], Chen, Chen and Li [Uniqueness of difference operators of meromorphic functions, J. Ineq. Appl. 2012(2012), Art 48], Zhang [Value distribution and shared sets of differences of meromorphic functions, J. Math. Anal. Appl. 367(2010), 401-408].

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.197-200
• /
• 2001

In the multi-stage former, manufacture of hexagonal fitting nut was generated in a defective products about $70{\~}80\%$. Defective products reduced in a product stiffness and increased a product cost. Defects for manufacturing hexagonal fitting nut caused in a increase of ductile fracture value. So in the study, a preform designed to reduce ductile fracture value and designed preform verified through the finite element simulation. In conclusion, Ductile fracture value reduced if A round dimension of preform reduced and a part of opposition angle contributed in Plenty a volume.