• 자원환경지질
• /
• 제18권1호
• /
• pp.41-47
• /
• 1985

Hankel변환적분의 계산에 사용되는 $J_0$ 및 $J_1$ 디지탈 선형필터의 성능을 adaptive 필터를 사용함으로써 비교 하였다. $J_0$ 영역의 어떠한 Hankel 변환적분도 수학적으로 이에 대응하는 $J_1$ 영역으로 바꿀 수 있으며, 비저항 탐사에서 이용되는 모든 전극배치에 대한 겉보기비저항은 $J_1$ 필터만으로 계산이 가능하다. 보통 $J_1$ 필터는 이와 대응하는 $J_0$필터에 비하여 정확성은 비슷하지만, 계산효율은 좀 더 높다. 또한 $J_0$에서 $J_1$영역으로 변환시키면, Schlumberger배치 뿐만 아니라 쌍극자배치 사용시에도 $J_1$함수만을 포함하는 효율적인 겉보기비저항 계산식을 이용할 수 있다.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1986-1996
• /
• 2003

Methodology based on the elastic-plastic fracture mechanics has been widely accepted in predicting the critical crack length(CCL) of pressure tubes of CANDU nuclear plants. A conservative estimate of CCL is obtained by employing the J-resistance curves measured with the specimens satisfying plane strain condition as suggested in the ASTM standard. Due to limited thickness of the pressure tubes the curved compact tension(CT) specimens taken out from tile pressure tube have been used in obtaining J-resistance curves. The curved CT specimen inevitably introduce slant fatigue crack during precracking. Hence, effect of specimen geometry and slant crack on J-resistance curve should be explored. In this study, the difference of J integral values between the standard CT specimens satisfying plane strain condition and the nonstandard curved CT with limited thickness (4.2mm) is estimated using finite element analysis. The fracture resistance curves of Zr-2.5Nb obtained previously by other authors are critically discussed. Various finite element analysis were conducted such as 2D analysis under plane stress and plane strain conditions and 3D analysis for flat CT, curved CT with straight crack and curved CT with slant crack front. J-integral values were determined by local contour integration near the crack tip, which was considered as accurate J-values. J value was also determined from the load versus load line displacement curve and the J estimation equation in the ASTM standard. Discrepancies between the two values were shown and suggestion was made for obtaining accurate J values from the load line displacement curves obtained by the curved CT specimens.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.59-67
• /
• 2002

The comparison of $J_{Rice}$-resistance considering a few strength ratio in Rice J-integral formula and $J_{\delta}$-resistance curves converted from experimental CTOD using appropriate strength chosen according to strain hardening level, n=10.6 (A533B steel) and n=8.1 (BS4360 steel) is carried out. The optimal dimensionless strength ratio like the factor of revision, (see full text)reflecting strain hardening level in Rice\`s experimental formula is found out and the reliability of appropriate reference strength chosen according to strain hardening level in different materials is investigated through doing that CTOD is transformed from $J_{\delta}$-integral using relationship between J-integral and CTOD. The results are as follows; 1) The optimal factor of revision is when m equals to 3 in (see full text) for Rice's and the above optimal factor of revision multiplies by coefficient, η in Rice's experimental formula instead of n=2, 2) and the pertinent reference strength for high strain hardening material like BS4360 steel is ultimate strength, $\sigma_{u}$ and for material like A533B steel is ultimate-flow strength, $\sigma_{u-f}$. The incompatible of the behavior of both experimental J-resistance curves using Rice's formula and CTOD-resistance curves for A533B and BS4360 steel by Gordon, et al., could be corrected using the optimal factor of revision in Rice\`s and the pertinent reference strength in J=$m_{j}$${\times}$$\sigma_{i}$${\times}$CTOD.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.81-82
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.44-44
• /
• 2009

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.90-99
• /
• 1989

In this study, J-integral values obtained by various methods, i.e, R-Curve, Unloading Compliance, Strectched Zone Width [SZW], and Acoustic Emission [AE] methods are investigated. Elasto-plastic fracture toughness [$J_IC$] estimations by R-curve method are overestimated than those by SZW method, and those by unloading compliance method is around middle value of them. And the difference between them is little. The $J_IC$ value by AE method was almost agreed with that by SZW, and then proved to be useful. Crack propagation mechanism on fractography is a stable ductile fracture. For the identification of ductile fracture, both fractography analysis and AE method were applied to estimate the characteristics more precisely.

• 전산구조공학
• /
• 제8권4호
• /
• pp.137-148
• /
• 1995

이차원 선형탄성파괴역학 문제에서 인장모우드 상태의 응력확대계수를 명료하게 산정할 수 있는 독립적 적분경로에 근거를 둔 새로운 J-적분 균열모델이 제안되었다. 이 방법은 p-수렴 개념에 기초를 두며 기존의 유한요소 컴퓨터코드에 쉽게 적용할 수 있다. 본 연구에서는 균열선단에서의 응력상태가 조사되었으며, 균열선단으로부터 떨어진 정규거리로 표현되는 서로 다른 적분경로에 따라 J-적분치가 유한요소해석시 Rice의 이론처럼 경로에 독립적인 해를 얻을 수 있는지 분석되었다. 세가지 수치예제인 중앙균열판, 일변균열판과 양변균열판과 양변균열판의 p-수렴 해석결과가 종래의 h-수렴법에 의한 해석결과와 비교되었으며, 또한 이 결과는 제안된 방법의 정확성과 수치적 안정성을 보여주고 있다.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.154-165
• /
• 1998

본 논문에서는 Mongrel원리를 적용한 6절점 삼각형 특이 요소와 8절점 사각형 요소를 사용하여 등방성 재료의 평면균열문제에 대한 응력확대계수를 직,간접적으로 구함으로서 그 수렴성을 입증하였다. 평면균열문제의 경우, 전 영역의 균열크기에 걸쳐 동일한 분할 형태와 요소 수에서 Mongrel 특이요소를 균열끝 요소로 사용하여 직접 구한 응력확대계수가 J-적분을 통해 간접 계산된 응력확대계수에 비해 정해에 잘 일치하였다. 또한 항공기 수명관리의 핵심이라 할 수 있는 피로균열 성장해석을 위한 기초실험으로서 F-5 날개 스파 Al 7075-T6의 CT시편을 채취하여 파괴인성실험을 수행한 결과 L-T방향 파괴인성치는 31.06 ksi.inch$\frac{1}{2}$ 이었다.

• 대한수학회지
• /
• 제45권2호
• /
• pp.331-353
• /
• 2008

Some new nonlinear retarded integral inequalities of Gronwall-like type are established, which mainly generalized some results given by Cho, Dragomir and Kim (J. Korean Math. Soc. 43 (2006), No.3, pp. 563-578) and can be used in the analysis of various problems in the theory of certain classes of differential equations and integral equations. Applications examples are also indicated.

• 대한수학회지
• /
• 제58권2호
• /
• pp.383-400
• /
• 2021

The aim of this paper is to mainly establish the sufficient and necessary conditions for the boundedness of the commutator ����Ω,b which is generated by the parameter Marcinkiwicz integral ����Ω and the Lipschitz function b on generalized Orlicz-Morrey space L��,��(Rd) in the sense of the Adams type result (or Spanne type result). Moreover, the necessary conditions for the parameter Marcinkiewizcz integral ����Ω on the L��,��(Rd), and the commutator [b,����Ω] generated by the ����Ω and the space BMO on the L��,��(Rd), are also obtained, respectively.