• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1580-1586
• /
• 2007

The objective of this study was to compare the bioefficacy of L-lysine sulfate relative to L-lysine${\cdot}$HCl for 10 to 20 kg pigs. Two experiments were conducted to determine the bioefficacy of the two sources of lysine using daily gain, feed conversion, plasma urea nitrogen and nitrogen retention as the response criteria. In experiment 1, 168 crossbred barrows ($Landrace{\times}Large$ White), weaned at $28{\pm}3$ d ($9.07{\pm}0.78$kg body weight), were allotted to one of seven dietary treatments in a $2{\times}3$ (two lysine $sources{\times}three $ lysine levels) factorial arrangement of treatments with an added negative control treatment group. The basal diet was based on corn, peanut meal and soybean meal and provided 0.67% lysine. The basal diet was supplemented with 0.1, 0.2 or 0.3% lysine equivalents supplied from either L-lysine sulfate or L-lysine${\cdot}$HCl. Each treatment was fed to six pens of pigs with four pigs per pen. The trial lasted 21 days. The relative bioefficacy value of lysine in L-lysine sulfate using daily gain, feed conversion and plasma urea nitrogen as response criteria was 1.01, 1.05 and 1.04 of the lysine in L-lysine${\cdot}$HCl, respectively. In experiment 2, 42 crossbred ($Landrace{\times}Large$ White) pigs ($16.03{\pm}1.58$ kg body weight) were housed in stainless steel metabolism cages for 10 d and fed the seven diets used in the nitrogen-balance trial. The relative bioefficacy value of L-lysine sulfate was estimated to be 0.95 as effective as L-lysine${\cdot}$HCl for nitrogen retention on an equimolar basis. The t-test analysis revealed that bioefficacy of lysine in L-lysine sulfate was not significantly different from lysine in L-lysine${\cdot}$HCl, which was set at 1.00. In conclusion, L-lysine sulfate can be used instead of L-lysine${\cdot}$HCl to fortify lysine-deficient diets fed to 10 to 20 kg pigs.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Wind and Structures
• /
• v.27 no.1
• /
• pp.11-27
• /
• 2018

The straight-cone steel cooling tower is a novel type of structure, which has a distinct aerodynamic distribution on the internal surface of the tower cylinder compared with conventional hyperbolic concrete cooling towers. Especially in the extreme weather conditions of strong wind and heavy rain, heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind, but existing studies mainly focus on the impact effect brought by wind-driven rain to structure surface. In addition, for the indirect air cooled cooling tower, different additional ventilation rate of shutters produces a considerable interference to air movement inside the tower and also to the action mechanism of loads. To solve the problem, a straight-cone steel cooling towerstanding 189 m high and currently being constructed is taken as the research object in this study. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed with continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind sped and rainfall intensity on flow field mechanism, the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower cylinder is analyzed. On this basis, the internal pressures of the cooling tower under the most unfavorable working condition are compared between four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the 3D effect of equivalent internal pressure coefficient is the most significant when considering two-way coupling between wind and rain. Additional load imposed by raindrops on the internal surface of the tower accounts for an extremely small proportion of total wind load, the maximum being only 0.245%. This occurs under the combination of 20 m/s wind velocity and 200 mm/h rainfall intensity. Ventilation rate of shutters not only changes the air movement inside the tower, but also affects the accumulated amount and distribution of raindrops on the internal surface.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1429-1436
• /
• 2006

Fermentation characteristics, nutrient retention and aerobic stability of barley silages prepared using 6 commercial inoculants were evaluated using 126 mini-silos (3-L) in a completely randomized design. Whole barley forage was chopped, wilted to 39% DM and treated with water (control, S) or one of six inoculants: A (containing Lactobacillus plantarum); B (L. plantarum and Enterococcus faecium); C (L. plantarum and Pediococcus cerevisiae); D (L. plantarum, Pediococcus pentosaceus and Propionibacterium freudenreichii, plus hydrolytic enzymes); E (Lactobacillus buchneri plus hydrolytic enzymes); F (L. buchneri and P. pentosaceus plus hydrolytic enzymes). Samples of treated forage were collected for analysis at the time of ensiling, and then 18 silos of each treatment were filled, capped and weighed. Triplicate silos were weighed and opened after 1, 3, 5, 7, 33, and 61 d. On d 61, $400{\pm}5g$ of material from each silo was placed in 1-L styrofoam containers, covered with cheesecloth and held at room temperature. Silage temperature was recorded hourly for 14 d via implanted thermocouple probes. Chemical composition of the forage at ensiling was consistent with previously reported values. At d 61, pH was lowest (p<0.01) in silage S. Ammonia-N was lower (p<0.05) in silage A than in silages S, B, E, or F. Compared to pre-ensiling values, water soluble carbohydrate concentrations were elevated in silages S, A, B, C and D, and decreased in E and F. Lactic acid concentrations were similar (p>0.10) across treatments. Acetic acid levels were highest (p<0.01) in silage E and lowest (p<0.01) in silage D. Recovery of DM was lower (p<0.01) in silage F than in silages S, A, B, C, or D. On d 61, yeasts were most numerous (p<0.01) in silage D, which was the only silage in which temperature rose more than $2^{\circ}C$ above ambient during aerobic exposure. Silage D also had the highest (p<0.01) pH and ADIN content after aerobic exposure. Lactic acid and WSC content of silage D decreased dramatically during the 14-d aerobic exposure period. Yeast counts (at d 14 of exposure) were lowest (p<0.01) in silages E and F. In general, the commercial inoculants did not appear to enhance the fermentation of barley silage to any appreciable extent in laboratory silos.

• Korean journal of applied entomology
• /
• v.20 no.1 s.46
• /
• pp.31-36
• /
• 1981

These experiments were conducted to investigate some effects of the soil fumigants Dow-fume MC-2, Cylone, TeloneC-17, and D-D on the growth response of the Korea ginseng(two-year old), Panax ginseng C.A. Meyer, and the chemical composition of the plants. Fumigant treatment increased growth of roots, stems, and leaves. The increase of root growth rates ranging from 2.8 to $58.7\%$ in fresh weight and 8.1 to $63.8\%$ in dry weight were observed in the 2-year old ginseng plants grown in the old ginseng soil treated with the different soil fumigants. The chemical analysis of inorganic elements such as N, P, K, Ca, Mg, Na, Fe, Mn, and Zn was made for the roots, stems and leaves of the 2-year old plants. The increases or decreases of content of the elements were observed, and their contents of each of the elements were changed with the kind of fumigants, part of the plants, and soil depth of the fumigant treatments, but their changing tendencies were not steady.

• Journal of Ginseng Research
• /
• v.42 no.1
• /
• pp.81-89
• /
• 2018

Background: BIOGF1K, a compound-K-rich fraction, has been shown to display anti-inflammatory activity. Although Panax ginseng is widely used for the prevention of photoaging events induced by UVB irradiation, the effect of BIOGF1K on photoaging has not yet been examined. In this study, we investigated the effects of BIOGF1K on UVB-induced photoaging events. Methods: We analyzed the ability of BIOGF1K to prevent UVB-induced apoptosis, enhance matrix metalloproteinase (MMP) expression, upregulate anti-inflammatory activity, reduce sirtuin 1 expression, and melanin production using reverse transcription-polymerase chain reaction, melanin content assay, tyrosinase assay, and flow cytometry. We also evaluated the effects of BIOGF1K on the activator protein-1 signaling pathway, which plays an important role in photoaging, by immunoblot analysis and luciferase reporter gene assays. Results: Treatment of UVB-irradiated NIH3T3 fibroblasts with BIOGF1K prevented UVB-induced cell death, inhibited apoptosis, suppressed morphological changes, reduced melanin secretion, restored the levels of type I procollagen and sirtuin 1, and prevented mRNA upregulation of MMP-1, MMP-2, and cyclo-oxygenase-2; these effects all occurred in a dose-dependent manner. In addition, BIOGF1K markedly reduced activator-protein-1-mediated luciferase activity and decreased the activity of mitogen-activated protein kinases (extracellular response kinase, p38, and C-Jun N-terminal kinase). Conclusion: Our results strongly suggest that BIOGF1K has anti-photoaging activity and that BIOGF1K could be used in anti-aging cosmeceutical preparations.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.207-213
• /
• 2016

In this study, a thermal flow analysis was performed using the commercial code, ANSYS-FLUENT to reduce room temperature in a turbine building of power plant. The selected control volume of the operating floor and deaerator floor for the turbine building was respectively modelled. The skylight windows at the deaerator floor were employed for ventilation windows. Through the study, in the first we found that all window close of the deaerator floor is one alternative for reducing the temperature of the operating floor. The next thing we knew that for windows open at the front of the deaerator floor, the temperature of deaerator zone and crane zone can be respectively reduced to $1.5^{\circ}C$ and $1.6^{\circ}C$. In addition, for windows close at the rear of the deaerator floor, the temperature of deaerator zone and crane zone can be respectively reduced to 1.4 and $0.5^{\circ}C$. Therefore, it was concluded that a better choice is to open the front windows at deaerator floor to reduce the temperature of the entire deaerator floor having high temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.598-602
• /
• 2004

The Tongcheng pig breed is a famous Chinese indigenous breed. The Ministry of Agriculture of China has filed it as 1 of 19 national key conservation breeds selected from more than 100 Chinese indigenous pig breeds in 2000. In order to improve the reproductive performance, it has been intensively selected to increase the litter size for about 10 years. The population randomly sampled from conservation nucleus of eight families in the Tongcheng pigs was genotyped for identification of their estrogen receptor locus polymorphisms with the PCR-RFLPs method. Only AB heterozygotes and BB homozygotes were detected, and $X^2$ test demonstrated that the locus was in disequilibrium at a significant level (p<0.05). In the present paper, the litter sizes in different parities were regarded as different traits. Holistic status of other unspecific and unidentified genes was estimated by using the statistical methods. Coefficients of kurtosis and skewness showed that the litter size still presented segregating characteristic in the 2nd, 5th, 7th, 8th and 9th parities. Analysis of homogeneity of variance between families confirmed the results for the 5th, 7th and 8th parities. The heritability of litter size for the 1st to 10th parities was estimated with paternal half-sib model and individual estimated breeding values (EBVs) were evaluated by a single trait animal model as well. We found that the averages of EBVs for litter size in each parity did not differ significantly between genotypes, despite the significant difference for original phenotype records in the 3rd, 4th and 5th parities (p<0.05 or p<0.01). The results may be explained by the deduction that the polymorphisms of ESR locus are no longer the important genetic base of litter size variation when the frequency of allele B accumulated in the experience of selection procedure, and further conferring that there exist special genes associated with litter size in the recent Tongcheng pigs population can be made.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1544-1550
• /
• 2008

The retinoids (vitamin A and its derivatives) play a critical role in vision, growth, reproduction, cell differentiation and embryonic development. Using the IMpRH panel, porcine cellular retinol binding protein genes 5 and 7 (RBP5 and RBP7) were assigned to porcine chromosomes 5 and 6, respectively. The complete coding sequences (CDS) of the RBP5 and RBP7 genes were amplified using the reverse transcriptase polymerase chain reaction (RT-PCR) method, and the deduced amino acid sequences of both genes were compared to human corresponding proteins. The mRNA distributions of the two genes in adult Wuzhishan pig tissues (lung, skeletal muscle, spleen, heart, stomach, large intestine, lymph node, small intestine, liver, brain, kidney and fat) were examined. A total of nine single nucleotide polymorphisms (SNPs) were identified in two genes. Three of these SNPs were analyzed using the polymerase chain reaction-restriction-fragment length polymorphism (PCR-RFLP) method in Laiwu, Wuzhishan, Guizhou, Bama, Tongcheng, Yorkshire and Landrace pig breeds. Association analysis of genotypes of these SNP loci with economic traits was done in our experimental populations. Significant associations of different genotypes of $RBP5-A/G^{63}$, $RBP5-A/G^{517}$ and $RPB5-T/C^{intron1-90}$ loci with traits including maximum carcass length (LM), minimum carcass length (LN), marbling score (MS), back fat thickness at shoulder (SBF), meat color score (MCS) and hematocrit (HCT) were detected. These SNPs may be useful as genetic markers in genetic improvement for porcine production.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.677-684
• /
• 2002

We have investigated the expression patterns of candidates for growth stage specifically expressed genes. The expression patterns of the EPV20, aldolase A, Translationally Controlled Tumor Protein (TCTP) and Adipocyte Differentiation Related Protein (ADRP) were examined by semiquantitative RT-PCR and northern blot analysis in skeletal muscle tissues of Hanwoo, especially in the longissimus dorsi at various growth stages. The EPV20 mRNA was expressed in longissimus dorsi tissue of Hanwoo, but there was no difference of expression levels during growth stages. Though the aldolase A gene was reported to be muscle-specific and regulated at developmental stages, the expression levels of aldolase A mRNA in the longissimus dorsi tissues showed little differences at various growth stages. The expression levels of TCTP which was reported as growth-related protein regulated at translation step were gradually increased during growth of Hanwoo. The expression levels of ADRP mRNA were rapidly increased at 24-month-old longissimus dorsi tissue of Hanwoo, and decreased at 30-month-old. Our data suggest that the ADRP gene show as growth-stage dependent expression and is related to fat deposition within muscular tissue.