• Journal of Environmental Science International
• /
• v.21 no.7
• /
• pp.805-813
• /
• 2012

The removal property of Cu and Zn ions by chemical precipitation and adsorption using zeolite(Z-C1) prepared from coal fly ash(CFA) were evaluated in this study. Adsorption kinetic and equilibrium mechanisms described to analyze parameters and correlation factors with Lagergen $1^{st}$ and $2^{nd}$ order model and Langmuir and Freundlich model. Analysis of adsorption kinetics data revealed that the pseudo $2^{nd}$ order kinetics mechanism was predominant. The equilibrium data in pH 3 - 5 were able to be fitted well to a Langmuir model, by which the maximum adsorption capacities($q_{max}$) were determined at 124.9 - 140.1 mg $Cu^{2+}/g$ and 153.2 - 166.9 mg $Zn^{2+}/g$, respectively. We found that Z-C1 has a potential application as absorbents in metal ion recovery with low pH.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.3
• /
• pp.62-69
• /
• 2000

In point of recycling wastes, batch test was conducted to examine the neutralization and Fe removal from laboratory wastewater using wastes. Oyster shell and slag had a buffer capacity to neutralize an acidic wastewater but tire rubber didn't. With increasing reaction time, dosage and agitation speed, Fe was well removed by wastes. As a result on the experiments of Freundlich isotherm, the adsorption intensities(1/n) were 0.32∼0.46 and the adsorption capacities(k) were 4.3∼4.6 for removing Fe from laboratory wastewater by wastes. In view of these results, it was estimated that wastes containing the similar compositions as these could utilize the neutralization and adsorption of heavy metals in laboratory wastewater.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.72-79
• /
• 1997

본 실험은 제초제인 2,4-D, dicamba, 및 MCPP의 토양에서의 이동을 확인하고 평가하기 위하여 토양종류에 따른 이들 제초제의 흡착과 휘발을 일정시간 동안 조사하였다. 제초제의 토양중 흡착은 batch isotherm으로 조사하였는데, MCPP와 2,4-D는 Freundlich식에서 직선으로 나타났으며, dicamba는 곡선으로 나타났다. Silty clay 토양에서 MCPP의 K$_d$ 및 K$_{fr}$값이 가장 높았으며, loamy sand 토양에서는 dicamba의 K$_d$, K$_{fr}$값이 가장 낮았다. 전반적으로 silty clay 토양에서 K$_d$, K$_{fr}$값이 높았고 N값은 낮았다. 토양에 살포된 제초제의 약 40%가 처리 25일 경과시 휘발되거나 분해되었으며, 이들 제초제중 2,4-D가 dicamba와 MCPP에 비하여 분해 및 휘발속도가 빨랐다. 모든 토양에서 이들 제초제의 분해 및 휘발속도는 공기에 노출된 초기에 현저하게 빠른 것으로 나타나고 있다. 본 연구의 결과는 자연환경중에서 이들 제초제의 이동 및 잔류 현황을 예견하는데 사용될 수 있을 것으로 사료된다.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.21-28
• /
• 1995

The removal of heavy metals from synthetic wastewater containing Pb, Cr, Cd using previously washed and dried exhausted coffee was studied varying cohcentration, pH and temperature. All the heavy metals were removed in 3.0 minutes and the removal efficiency was maximum 80~90% with different pH and temperature conditions. The differences in removal efficiency between exhausted coffee and activated carbon under the same conditions were not seen. The removal efficiency was slightly increased with increasing pH in Cd and increasing temperature in Cr, respectively. The batch adsorption kinetics and adsorption equilibrium were examined and described by a first order reversible reaction and Freundlich isotherm, respectively. And the removal of Pb was found to have the best removal efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2029-2035
• /
• 2014

In this study, we conducted the adsorption equilibrium and batch experiments of dissolved organic carbon (DOC) in the wastewater by granular activated carbon (GAC). The components of organic compound were Beef extract (1.8 mg/L), Peptone (2.7 mg/L), Humic acid (4.2 mg/L), Tannic acid (4.2 mg/L), Sodium lignin sulfonate (2.4 mg/L), Sodium lauryle sulfate (0.94 mg/L), Arabic gum powder (4.7 mg/L), Arabic acid (polysaccharide) (5.0 mg/L), $(NH_4)_2SO_4$ (7.1 mg/L), $K_2HPO_4$ (7.0 mg/L), $NH_4HCO_3$ (19.8 mg/L), $MgSO_4{\cdot}7H_2O$ (0.71 mg/L), The adsorption characteristics of DOC in synthetic wastewater was described using the mathematical model through a series of isotherm and batch experiments. It showed that there was linear adsorption region in the low DOC concentration (0~2.5 mg/L) and favorable adsorption region in high concentration (2.5~6 mg/L). The synthetic wastewater used was prepared using known quantities of organic and/or inorganic compounds. Adsorption modelling isotherms were predicted by the Freundlich, Langmuir, Sips and hybrid isotherm equations. Especially, hybrid isotherm of Linear and Sips equation was a good adsorption equilibrium in the region of the both the low concentration and high concentration. In applying carbon adsorption for treating water and wastewater, hybrid adsorption equation plus linear equation with Sips equation will be a good new adsorption equilibrium model. Linear driving force approximation (LDFA) kinetic equation with Hybrid (linear+Sips) adsorption isotherm model was successfully applied to predict the adsorption kinetics data in various GAC adsorbent amounts.

• Clean Technology
• /
• v.25 no.3
• /
• pp.198-205
• /
• 2019

The adsorption equilibrium, kinetic, and thermodynamic parameters of brilliant green adsorbed by coconut based granular activated carbon were determined from various initial concentrations ($300{\sim}500mg\;L^{-1}$), contact time (1 ~ 12 h), and adsorption temperature (303 ~ 323 K) through batch experiments. The equilibrium adsorption data were analyzed by Langmuir, Freundlich, Temkin, Harkins-Jura, and Elovich isotherm models. The estimated Langmuir dimensionless separation factor ($R_L=0.018{\sim}0.040$) and Freundlich constant ($n^{-1}=0.176{\sim}0.206$) show that adsorption of brilliant green by activated carbon is an effective treatment process. Adsorption heat constants ($B=12.43{\sim}17.15J\;mol^{-1}$) estimated by the Temkin equation corresponded to physical adsorption. The isothermal parameter ($A_{HJ}$) by the Harkins-Jura equation showed that the heterogeneous pore distribution increased with increasing temperature. The maximum adsorption capacity by the Elovich equation was found to be much smaller than the experimental value. The adsorption process was best described by the pseudo second order model, and intraparticle diffusion was a rate limiting step in the adsorption process. The intraparticle diffusion rate constant increased because the dye activity increased with increases in the initial concentration. Also, as the initial concentration increased, the influence of the boundary layer also increased. Negative Gibbs free energy ($-10.3{\sim}-11.4kJ\;mol^{-1}$), positive enthalpy change ($18.63kJ\;mol^{-1}$), and activation energy ($26.28kJ\;mol^{-1}$) indicate respectively that the adsorption process is spontaneous, endothermic, and physical adsorption.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.231-239
• /
• 2005

This study was performed to investigate adsorption characteristics of MTBE and Cd depending upon types of clay minerals md their physicochemical properties. The adsorption characteristics were examined by batch adsorption test on various experimental parameters such as adsorption time, ratio of solution to soil, concentration of contaminants, content of organic matter, pH, and zeta potential. The adsorption efficiency of MTBE or Cd for three types of clays decreased in response to the increase of the ratio of solution to soil whereas their adsorbed amounts increased. MTBE was greatly adsorbed in the decreasing order of vermiculite, bentonite, and CTAB-bentonite while Cd was adsorbed in the decreasing order of bentonite, vermiculite, and CTA-bentonite. An equilibrium isotherm for MTBE was well fitted to Freundlich plotting whereas that for Cd was closely corresponded to Langmuir isotherm. The adsorbed amount of MTBE on bentonite and vermiculite showed the maximum at 1% and 5% of humic acid, thereafter diminished while the adsorbed amount of MTBE on CTAB-bentonite increased in proportion to humic acid. Conversely, the adsorbed amount of Cd on the addition of humic acid continued to increase regardless of types of adsorbents. For all types of adsorbents, adsorbed quantity and adsorption efficiency of Cd have been coincidently increased at pH 8 and they were further enhanced at pH 10 showing 90% adsorption efficiency. Upon pH rose, the zeta potential on each adsorbent began to decrease, while increasing Cd concentration led to decline of zeta potential, which in turn ascribed to lowering dispersion stability that could consequently enhance adsorption capability.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.446-452
• /
• 2008

This study was conducted to research the biosorption characteristics using algae, Spirulina platensis, for the removal of Pb and Cu ions in wastewater. Both of free algal cell and immobilized algae by Ca-alginate were used as bioadsorbent, and experiment was proceed in batch reactor for Pb and Cu ions removal, respectively. In the biosorption of Pb and Cu ions by free Spirulina platensis cell, the adsorption equilibrium reached within 20 minute. The higher adsorbed amount of Pb and Cu was shown as increasing of initial concentration of Pb and Cu, and pH of solution, respectively, and the optimum pH was 4.5$\sim$5.0. Under the conditions of initial concentration of Pb or Cu are 200 mg/L, the maximum amounts of Pb and Cu adsorbed to the unit weight of Spirulina platensis were 86.43 and 57.02 mg/g, respectively, and these values were 1.94 and 1.48 times higher than those of activated carbon under same conditions, respectively. The biosorption kinetics of Pb and Cu ions by free Spirulina platensis cell fitted very well to the Freundlich and Langmuir isotherm. The maximum amount of Pb or Cu adsorbed to the unit mass of adsorbent by the Langmuir isotherm($q_{max}$) represented as 95.24 and 62.50 mg/g, respectively. The FT-IR results of free Spirulina platensis biomass showed that biomass has different functional groups and these functional groups are able to react with metal ions in aqueous solution. In the biosorption of Pb and Cu ions by Ca-alginate immobilized algae Spirulina platensis, the adsorption equilibrium reached within 40 min. and observed a little diffusion limitation differed from the free algal cell adsorption.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.9
• /
• pp.13-21
• /
• 2008

Partitioning tracer method is a useful tool to characterize large domains of the aquifers contaminated with light nonaqueous phase liquids (LNAPLs). Sorption of the partitioning tracers to the organic matter content of soil can potentially influence the efficacy of partitioning tracer method. LNAPL-water partitioning coefficients of tracers ($K_{nw}$), measured by static method, showed linear relationship. Sorption isotherm tests were conducted to evaluate the sorption capacity of the soils packed in the columns and the results were appropriately represented by Freundlich sorption isotherm. The sorption of tracers proportionally increased with the increase of the organic matter content of the soil. Laboratory experiments were conducted in four columns each packed with soils of different organic matter contents to determine the potential interference effects of sorption to soil organic matter content and correction factors for the errors in estimation of LNAPLs by partitioning tracer method. Though there were no contaminants added, breakthrough curves from columns packed with mixture of Jumunjin standard sand and organic matter showed separation of tracers. Columns were then contaminated to residual saturation with kerosene and breakthrough curves were obtained. The results show that sorption of tracers to soil organic matter leads to an increase in the retardation factor (R) and hence, to an overestimation of the saturation of LNAPLs. A relation between the percentage of organic matter content and the corresponding percentage error in the estimation of NAPLs has been developed.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.327-337
• /
• 2007

Mineral compositions were determined using quantitative X-ray diffraction analysis on the three kinds of Youngdong illite consisting of white, yellow and refined yellow samples. Mean particle size and their size distribution patterns were measured by laser particle size analyzer. The characteristics of phosphate adsorption on illite were studied through batch adsorption experiments. The white illite has less illite content, but is finer than that of yellow. The refined yellow illite has more illite content and finer particle size compared with those of raw yellow illite. The adsorption rate of phosphate generally increases when the mass of illite increases, whereas adsorption quantity decreases with ascending pH. The phosphate adsorption usually increases with ascending illite content or descending particle size. Although the white illite has lower illite content than the yellow, the former has higher phosphate adsorption quantity than the latter. This can be ascribed to the fine particle size, high interlayer charge, and low substitution in tetrahedral site of white illite. The adsorption isotherms of white illite are well fitted with the Langmuir equation, however those of yellow one are better with Freundlich equation.