• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.106-116
• /
• 2011

USN(Ubiquitous Sensor Network) environment permits us to access whatever information we want, whenever we want. The technologies to provide a basement to these environments premise an accurate location establishment. Especially, ITS(Intelligent Transportation Systems) is easily constructed by applying USN technology. Localization can be categorized as either Range-based or Range-free. Range-based is known to be not suitable for the localization based on sensor network, because of the irregularity of radio propagation and the additional device requirement. The other side, Range-free is much appropriated for the resource constrained sensor network because it can actively locate by means of the communication radio. But, generally the location accuracy of Range-free is low. Especially, it is very low in a low-density environment. So, these two methods have both merits and demerits. Therefore, it requires a new method to be able to improve tracking accuracy by combining the two methods. This paper proposes the tracking scheme based on range-hybrid, which can markedly enhance tracking accuracy by effectively using the information of surrounding nodes and the RSSI(Received Signal Strength Indication) that does not require additional hardware. Additionally, we present a method, which can improve the accuracy of vehicle tracking by adopting the prediction mechanism. Simulation results show that our method outperforms other methods in the transportation simulation environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.266-274
• /
• 2020

This paper reports a means of improving the abnormal noise of light tactical vehicles (LTVs) by applying a vehicle fitting type generator (hereinafter called generator). LTVs are classified as having generators, and there are no differences in the noise level. On the other hand, quality improvement was performed in response to unpleasant noise felt by the user (hereinafter called abnormal noise) during vehicle operation. To improve the quality, the generator mounting structure and the phenomenon of the vehicle in the problem were identified. Through this, it was confirmed that the noise caused by the generator installation was the rattle noise. Rattle noise at the engine driving system is normally caused by the transfer of irregular torque generated by the engine power stroke and the backlash by the spline-serration fitting structure between the engine coupler and rotor assembly in a generator. Therefore, this study established an improvement plan to apply a damper coupler to solve the cause of the abnormal noise. Regarding the improved establishment method, the improvement effect was confirmed from the influence of the irregular torque of the engine, noise level, dynamic characteristics analysis, and the endurance test of the parts.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.125-132
• /
• 2018

In this study, a direct tensile test was planned to identify the tensile performance of UHPC, and the irregularity of cracks, which is a problem of the direct tensile test, was complemented through the introduction of notches at the center of a specimen. In this regard, a number of specimens divided by batch to reduce the deviation of direct tensile test values were fabricated to present reference data with respect to highly reliable direct tensile strength values. In addition, the mechanical properties and reliability of the specimens were examined under the curing conditions of the specified design strength of 120MPa for the steel fiber reinforced concrete with 1.5% fiber volume fraction, which is most suitable for the field application. As a result, the deviation of averages by batch between compressive strength and direct tensile strength did not show a large difference, and all cracks occurred within 20mm in the direct tensile test. At the 95% confidence interval of the direct tensile strength, the range was considerably small in the mean and the standard deviation, and there was no significant difference depending on the curing conditions. The results confirmed that a stable direct tensile test was performed, and highly reliable results were obtained through the fabrication of specimens by batch and test progress.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.64-75
• /
• 2017

The role of a track subgrade is to provide bearing capacity and distribute load transferred to lower foundation soils. Track subgrade soils are usually compacted by heavy mechanical machines in the field, such that sometimes they are attributed to progressive residual settlement during the service after construction completion of the railway track. The progressive residual settlement generated in the upper part of a track subgrade is mostly non-recoverable plastic deformation, which causes unstable conditions such as track irregularity. Nonetheless, up to now no design code for allowable residual settlement of subgrade in a railway trackbed has been proposed based on mechanical testing, such as repetitive triaxial testing. At this time, to check the DOC or stiffness of the soil, field test criteria for compacted track subgrade are composed of data from RPBT and field compaction testing. However, the field test criteria do not provide critical design values obtained from mechanical test results that can offer correct information about allowable permanent deformation. In this study, a test procedure is proposed for permanent deformation of compacted subgrade soil that is used usually in railway trackbed in the laboratory using repetitive triaxial testing. To develop the test procedure, an FEA was performed to obtain the shear stress ratio (${\tau}/{\tau}_f$) and the confining stress (${\sigma}_3$) on the top of the subgrade. Comprehensive repetitive triaxial tests were performed using the proposed test procedure on several field subgrade soils obtained in construction sites of railway trackbeds. A permanent deformation model was proposed using the test results for the railway track.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.381-388
• /
• 2010

In this study, characteristics of the seismic response of the non-earthquake resistant reinforced concrete (RC) frame were identified. The test building is designed to withstand only gravity loads and not in compliance with modern seismic codes. Smooth bars were utilized for the reinforcement. Members are provided with minimal amount of stirrups to withstand low levels of shear forces and the core concrete is virtually not confined. Columns are slender and more flexible than beams, and beam-column connections were built without stirrups. Through the modeling of an example RC frame, the feasibility of the fiber elementbased 3D nonlinear analysis method was investigated. Since the torsion is governed by the fundamental mode shape of the structure under dynamic loading, pushover analysis cannot predict torsional response accurately. Hence, dynamic response history analysis is a more appropriate analysis method to estimate the response of an asymmetric building. The latter method was shown to be accurate in representing global responses by the comparison of the analytical and experimental results. Analytical models without rigid links provided a good estimation of reduced stiffness and strength of the test structure due to bond-slip, by forming plastic hinges closer to the column ends. However, the absence of a proper model to represent the bond-slip poased the limitations on the current inelastic analysis schemes for the seismic analysis of buildings especially for those with round steel reinforcements. Thus, development of the appropriate bond-slip model is in need to achieve more accurate analysis.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.3
• /
• pp.69-76
• /
• 2005

The young leaves of A. princeps have been a well known for a crude medicine and used in treatment of colic pain, vomiting and menstrual irregularity. Based on TLC and HPLC and used an artemisinin, an anti-malarial compounds which is believed to be detected only in A. annuaup so far can be biosynthesized in A. princeps. To investigate the production of secondary metabolites like artemisinin in cultured cells, the cell culture of A. princeps was established. Callus and suspension cultured cells of A. princeps were induced and grown highest in MS media containing $0.2\;mg/{\ell}$ 2,4-D, $0.1\;mg/{\ell}$ BAP and 2% sucrose. Different metabolites from in vitro cultured cells (callus and suspension cultured cell) and intact plants were analyzed by TLC analysis. As a result, we can confirm that in vitro culture has a potential for mass production of secondary metabolites from A. princeps.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.871-880
• /
• 1997

Multiple features of occlusion have been combined by epidemiologists in attempts to objectively to determine malocclusion severity and treatment priority. Jenny et al were developed DAI(Dental Aesthetic Index), which is an orthodontic index based on socially defined aesthetic standards. This study aimed to evaluate association between 10 occlusal components of DAI and individual measures of skeletal morphology by use of univariate and multivariate analysis. In addition the relationship between a Dental Aesthetic Index score and skeletal morphology was evaluated. The data for this study were obtained from cephalometric radiographs and dental casts of 182 Korean patients(79 men, 103 women) with permanent dentition who had been accepted for the orthodontic treatment at Department of Orthodontics, Chonbuk National University. The results are as follows: 1. Several occlusal components of DAI(missing, crowding and spacing in the incisal segment, diastema, largest anterior irregularity on upper and lower arch) were not associated with individual measures of craniofacial morphology. 2. Sagittal occlusal components of DAI were associated with anteroposterior skeletal measures. 3. The relation between vertical occlusal components of DAI and vertical skeletal measures was low magnitude. 4. A Dental Aesthetic Index, which is based on several aspects of occlusion, did not identify craniofacial morphology. We can conclude that combination of certain occlusal components of the DAI may be related with specific skeletal morphology; but, this concept could not be accepted generally.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.693-703
• /
• 2003

The present study evaluated the effects of guided tissue regeneration using xenograft material(deproteinated bovine bone powder), with and without Calcium sulfate membrane in beagle dogs. Contralateral fenestration defects (6 ${\times}$ 4 mm) were created 4 mm apical to the buccal alveolar crest of maxillary premolar teeth in 5 beagle dogs. Deproteinated bovine bone powders were implanted into fenestration defect and one randomly covered Calcium sulfate membrane (experimental group). Calcium sulfate membrane was used to provide GTR. Tissue blocks including defects with soft tissues which were harvested following four & eight weeks healing interval, prepared for histo-phathologic analysis. The results of this study were as follows, 1. In control group, at 4 weeks after surgery, new bony trabecular contacted with interstitial tissue and osteocytes lie cell were arranged in new bony trabecule. Bony lamellation was not observed. 2. In control group , at 8 weeks after surgery, scar-like interstitial tissue was filled defect and bony trabecule form lamellation. New bony trabecular was contacted with interstitial tissue but defect was not filled yet. 3. In experimental group, at 4 weeks after surgery, new bony trabecular partially recovered around damaged bone. But new bony trabecule was observed as irregularity and lower density. 4. In experimental group, at 8 weeks after surgery, lamella bone trabecular developed around bone cavity and damaged tissue was replaced with dense interstitial tissue. In conclusion, new bone formation regenerated more in experimental than control groups and there was seen observe more regular bony trabecular in experimental than control groups at 4 weeks after surgery. In control group, at 8 weeks after surgery, the defects was filled with scar-like interstitial tissue but, in experimental group, the defects was connected with new bone. Therefore xenograft material had osteoconduction but could not fill the defects. We thought that the effective regeneration of periodontal tissue, could be achieved using GTR with Calcium sulfate membrane.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.4
• /
• pp.623-629
• /
• 1996

Bronchial carcinoid tumors are uncommon, constituting approximately 5% of all primary lung cancers. Carcinoid tumors belong to the calss of neuroendocrine tumors that consist of cells that can store and secrete neuramines and neuropeptides. Neuroendocrine tumors of the lung include three pathologic types : a low-grade malignancy, the so-called 'typical carcinoid', a more aggressive tumor, the "atypical carcinoid", and the most aggressive malignant neoplasm, the small-cell carcinoma. Atypical carcinoid tumor have a higher malignant potential, is more commonly peripheral than is the typical carcinoid tumor. Histologic features would characterize a carcinoid as hitologically atypical : increased mitotic activity, pleomorphism and irregularity of neuclei with promonent nucleoli, hyperchromatin, and abnormal nuclear-cytoplasmic ratio, areas of increased cellularity with disorganization of architecture, and areas of tumor necrosis. Metastatic involvement of regional lymph nodes and distant organ is common. The prognosis is related to size of the tumor, typical of atypical appearance, endoluminal of extraluminal growth, vascular invasion, node metastasis, Pulmonary resection is the treatement of choice for bronchial carcinoid. We experienced one case of bronchopulmonary atypical carcinoid tumor. In the case, radiologic study showed solitary lung mass with liver metastasis and the level of 5-HIAA was elevated. There was no history of cutaneous flushing, diarrhea, valvular heart disease. The authors reported a case of bronchopulmonary atypical carcinoid tumor with review of literatures.