• Design & Manufacturing
• /
• 제9권1호
• /
• pp.9-13
• /
• 2015

The HEV/EV Traction Motor Core manufacturing technology is a core component of Traction Motor Core is a key technology for the manufacture of eco-friendly automotive industry is essential for the competitiveness of the country must obtain the technology. This study was performed to develop a Rotor Core of the HEV/EV Traction Motor using the first time in Korea multi-gate BMC injection molding technique. Executed by the experiment of this study are as follows. Study 1: Developed a multi-gate BMC injection mold for the magnet fixed to the Rotor Core. Study 2: Developed a production implementation and manufacturing technology of the Rotor Core. In this study, the develop products and manufacturing technologies implemented by the BMC injection mold development for Magnet fixed to the Rotor Core and the results are discussed.

• 디지털융복합연구
• /
• 제12권1호
• /
• pp.593-598
• /
• 2014

조선업종은 숙련공의 감소와 노동력 부족을 해결하기 위해 자동화와 기계화가 필요하다. 특히 조선용 핸드레일 제조공정은 표준화된 타 분야와 달리 자동화가 낙후되어 있다. 본 논문에서는 조선용 핸드레일 제작에 사용할 수 있는 평철 자동화시스템을 컴퓨터 융합기술을 활용하여 설계하고 개발하였다. 시스템 기구부는 절단공정의 효율성, 생산성, 안정성 등을 고려하여 설계하였고, CATIA 와 ANSYS를 사용하여 구조물의 안정성을 확인하였다. 시스템 제어부는 개방성과 확장성을 제공하는 PCNC 콘트롤러를 사용하였고, 터치스크린 방식의 화면 조작을 통해 시스템의 제어 및 모니터링을 할 수 있도록 구축하였다. 평철 자동화시스템은 기계, 전자 그리고 컴퓨터 기술을 융합하여 산업체의 생산성을 향상시킬 수 있도록 개발하였다.

• 한국정보통신학회논문지
• /
• 제22권12호
• /
• pp.1675-1683
• /
• 2018

본 논문은 CNC(Computer Numerical Control) 장비로부터 나사선 형태로 가공된 나사를 비전 시스템을 통해 선별된 양품을 이송해 주는 철재 파렛트에 삽입될 NFC(Near Field Communication) 안테나 모델링에 대한 연구이다. 여기서 사용되는 CNC 장비는 IoT((Internet of Things)) 해당하는 ICT(Information & Communication Technology)을 접목 시키고, 서비스 인터넷에 해당하는 POP(Point Of Production System)을 연결하여 쌍방향으로 자유롭게 정보를 교환하면서 생산하는 스마트팩토리 시스템 기술이 반영하여 진화된 장비이다. 따라서 본 연구에서는 기존 아날로그식 장비에 POP 모니터링 시스템을 접목하여 자재 관리로 사용되는 철재 파렛트에 삽입된 NFC 안테나를 나사 가공품에 대한 위치 정보를 수집할 수 있도록 철재 파렛트 특성을 고려하여 현장 검증을 통해 그 특성을 알아보았다.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.186-198
• /
• 2022

Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.679-687
• /
• 2007

Nanoscale zero valent ion (nZVI) technology is emerging as an innovative method to treat contaminated groundwater. The activity of nZVI is very high due to their high specific surface area, and supporting this material can help to preserve its chemical nature by inhibiting oxidation. In this study, nZVI particles were attached to granular ion-exchange resin through borohydride reduction of ferrous ions, and chemical reduction of nitrate by this material was investigated as a potential technology to remove nitrate from groundwater. The pore structure and physical characteristics were measured and the change by the adsorption of nZVI was discussed. Batch tests were conducted to characterize the activity of the supported nZVI and the results indicated that the degradation of nitrate appeared to be a pseudo first-order reaction with the observed reaction rate constant of $0.425h^{-1}$ without pH control. The reduction process continued but at a much lower rate with a rate constant of $0.044h^{-1}$, which is likely limited by mass transfer. To assess the effects of other ions commonly found in groundwater, the same experiments were conducted in simulated groundwater with the same level of nitrate. In simulated groundwater, the rate constant was $0.078h^{-1}$ and it also reduced to $0.0021h^{-1}$ in later phase. The major limitation in application of ZVI for nitrate reduction is ammonium production. By using a support material with ion exchange capacity, the problem of ammonium release can be solved. The ammonium was not detected in the batch test, even when other competitive ions such as calcium and potassium existed.

• 청정기술
• /
• 제15권1호
• /
• pp.38-41
• /
• 2009

적니(red mud)는 보오크싸이트로부터 수산화알루미늄/알루미나를 제조하는 Bayer 공정에서 부산물로 발생되는 폐기물이다. 본 연구에서는 적니로부터 철과 알루미늄을 염산으로 침출시켜 폐수처리용 응집제를 제조하였다. 적니응집제를 합성폐수에 투입한 후 조절된 pH가 증가함에 따라 중금속이온 제거율이 증가하였다. 적니응집제 제조 시에 적니의 양이 증가할수록 Fe의 침출효율은 낮아졌으나, 적니응집제의 pH는 적니의 양이 증가할수록 높아졌다. 적니응집제와 물을 혼합한 용액을 다시 적니와 반응시켜 Fe 및 Al의 농도가 더 증가되고, pH가 향상된 침출액을 얻었다. 이 침출액의 pH는 다른 응집제 $FeCl_3$와 $Fe_2(SO_4)_3$의 pH와 비슷한 값을 보였다.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.726-739
• /
• 2013

피셔-트롭쉬 합성 반응은 촉매 표면에서 합성가스 (CO+$H_2$)를 탄화수소로 전환하는 반응이다. 코발트 또는 철계 촉매는 친환경적인 디젤 연료를 생산할 수 있고 합성가스의 전환율이 높은 촉매로 알려져 있다. 피셔-트롭쉬 반응에 사용되는 촉매의 활성은 촉매 표면에서의 활성점에 의존적이다. 활성점은 활성 물질의 크기, 담지량, 환원율, 지지체와 활성물질의 상호작용에 의해 결정된다. FT 촉매 제조 방법으로 활성물질의 크기를 조절하는 등의 새로운 방법들이 시도되고 있다. 여기에서는 촉매의 제조방법과 환원 특성을 비롯한 촉매의 형태와 반응 조건을 포함한 반응기 형태에 대해 알아보겠다.

• Journal of Animal Science and Technology
• /
• 제63권1호
• /
• pp.160-169
• /
• 2021

Boiled feed is obtained by mixing and boiling agricultural by-products such as rice straw, rice bran, and bean curd with grains. The study explored the change in fatty acid, free amino acid, nucleotide, mineral, cholesterol, myoglobin and collagen of longissimus dorsi muscle in Hanwoo steers fed with boiled feed. Forty steers, 20 heads per group, were divided into two groups: a control group and a boiled feed group. The steers were raised for 10 months. The boiled feed group was enriched with palmitoleic acid, oleic acid, arachidonic acid and unsaturated fatty acids compared with the control group. There were no significant differences in amino acid and nucleic acid composition between the two groups. The boiled feed group contained higher levels of iron and manganese in the boiled feed group compared with the control group. The total cholesterol level was significantly increased, whereas calorie levels, myoglobin and collagen composition showed no differences. As the supply of boiled feed increases the content of fatty acids, unsaturated fatty acids and minerals related to flavor, it should be a feed that leads to the production of high-quality beef.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.225-230
• /
• 2004

A cold ＆ hot rolling coil production line of iron nill consists of a kind of coherent automatic process, but an automatic labelling process still had technical difficulties in the automation of its process. The reason for difficulties in building an automatic process is that quantitative data for each rolled coil from every shipping is not easy to receive from the previous process. it is not possible to apply for a general and simple purpose robot that is actually worked through a taught position to the process because the size and direction of the coi1 has differed on every shipping. From these reasons. we introduce a robot vision system to accept an expected variable situation and to ensure the stability and flexibility of the process. This paper examines a study applied for similar cases and finds the position and direction of relied coil using the moment invariant algorithm proposed by Hu. In addition. the camera calibration and position error compensation algorithm is applied by the analysis of the relationship of transition in a space coordinate system. The construction of a robot vision system proposed by this paper is a more intellectual system than that of the automatic labelling system. which is already used to the Daihen steel nill of NEW JAPAN steel mill co. Ltd in Japan, and shows a better independent operation in the field of production.

• Animal Bioscience
• /
• 제34권8호
• /
• pp.1350-1364
• /
• 2021

Objective: Adequate vitamin and trace mineral intake for pigs are important to achieve satisfactory growth performance. There are no data available on the vitamin and trace mineral intake across pig producers in China. The purpose of this study was to investigate and describe the amount of vitamin and trace minerals used in Chinese pig diets. Methods: A 1-year survey of supplemented vitamin and trace minerals in pig diets was organized in China. A total of 69 producers were invited for the survey, which represents approximately 90% of the pig herd in China. Data were compiled by bodyweight stages to determine descriptive statistics. Nutrients were evaluated for vitamin A, vitamin D, vitamin E, vitamin K, thiamine, riboflavin, vitamin B₆, vitamin B₁₂, pantothenic acid, niacin, folic acid, biotin, choline, copper, iron, manganese, zinc, selenium, and iodine. Data were statistically analyzed by functions in Excel. Results: The results indicated variation for supplemented vitamin (vitamin A, vitamin D, vitamin E, vitamin K, vitamin B₁₂, pantothenic acid, niacin, and choline) and trace minerals (copper, manganese, zinc, and iodine) in pig diets, but most vitamins and trace minerals were included at concentrations far above the total dietary requirement estimates reported by the National Research Council and the China's Feeding Standard of Swine. Conclusion: The levels of vitamin and trace mineral used in China's pig industry vary widely. Adding a high concentration for vitamin and trace mineral appears to be common practice in pig diets. This investigation provides a reference for supplementation rates of the vitamins and trace minerals in the China's pig industry.