• Title/Summary/Keyword: Ionization Chamber

검색결과 235건 처리시간 0.03초

6 MeV 전자 빔의 교정에 원통형 이온함의 사용에 관한 연구 (The Study on the Use of a Cylindrical Ionization Chamber for the Calibration of a 6 MeV Electron Beam)

  • 김성훈;허현도;최상현;최진호;김혁주;임천일;신동오
    • 한국의학물리학회지:의학물리
    • /
    • 제20권4호
    • /
    • pp.317-323
    • /
    • 2009
  • 6 MeV 전자빔과 같은 저메가전압 전자빔 교정 시에 물흡수선량에 기반한 선량측정 체계에선 평행평판형 이온함을 사용하도록 하고 있다. 이러한 전자 에너지 범위에선 원통형 이온함을 정기적 기준 선량측정으로서 사용되어서는 안되지만, 사용자 편의상 임시적 사용 가능성에 대해 살펴보고자 하였다. 본 연구에선 빔 선질 $R_{50}=2.25\;g/cm^2$인 명목 에너지 6 MeV 전자빔의 경우에 원통형 이온함인 PTW30013 이온함의 사용가능성에 대해 조사하였다. 2차 표준기관인 식품의약품안전청(KFDA)으로부터 10개 이온함에 대해 물흡수선량 교정인자 $N_{D,W,Q_0}$를 받았다. 교차교정된 평행평판형 ROOS 이온함으로 6 MeV 전자빔에 대해 측정한 선량값을 사용하여 "임시적" $k_{Q,Q_0}$값을 구하였다. 10개의 이온함에 대해 평균한 값인 "0.9352"를 해당 선질에 대한 이온함의 $k_{Q,Q_0}$로 간주하여 흡수선량을 계산하였다. ROOS 이온함으로 측정한 선량값과 최대 2% 범위 안에서 일치하였다. 사용자 편의상 원통형 이온함을 사용해야 하는 경우에 이 "0.9352" 값을 본 연구의 빔선질과 이온함에 대한 빔선질보정인자로서 임시적으로 사용할 수 있으리라고 본다.

  • PDF

저온열탈착기술을 이용한 에틸렌 및 저분자 탄화수소 분석방법 연구 (A Study of Analytical Method for Ethylene and Low Weight Hydrocarbons (LWHC) using Thermal Desorption and Gas Chromatography-Flame Ionization Detector with (TD-GC-FID))

  • 김보원;김기현;김용현;안정현
    • 한국대기환경학회지
    • /
    • 제30권1호
    • /
    • pp.77-87
    • /
    • 2014
  • In this study, an experimental approach to measure a suite of low weight hydrocarbons was investigated with an emphasis on ethylene (EL) along with many others (ethane (EA), propane (PA), propylene (PL), n-butane (BA), acetylene (AL), methyl acetylene (ML)). Their concentrations were quantified using GC-FID system equipped with thermal desorption (TD) system. The TD-based analysis was conducted using both Link Tube/Thermal Desorber (LT/TD) method and Modified Injection through a Thermal Desorption (MITD) method. The results of these analyses were evaluated in a number of respects. The system allowed the detection of all compounds except methane with the mean response factor (RF) of 10.28 (EA) to 11.94 (PL). The method detection limits of target compounds were seen in the range of 0.027 (ML) to 0.146 ng (BA). The emission flux of some environmental samples (fruits), when measured using a small flux chamber system, fell in the range of 0.14 (AL: Kiwi) to $181ng{\cdot}g^{-1}{\cdot}hr^{-1}$ (EL: Apple Peel). The results of this study confirm that the experimental approach developed in this study allows to accurately measure emissions of low weight hydrocarbons (LWHC) like ethylene from various natural and man-made source processes.

세기조절방사선치료의 환자별 정도관리를 위한 2차원적 선량계의 유용성 평가 (Comparison of the Efficacy of 2D Dosimetry Systems in the Pre-treatment Verification of IMRT)

  • 홍채선;임종수;주상규;신은혁;한영이;안용찬
    • Radiation Oncology Journal
    • /
    • 제27권2호
    • /
    • pp.91-102
    • /
    • 2009
  • 목 적: 세기조절방사선치료에 있어서 치료 전 환자별 정도관리(QA)에 사용하는 EDR2 필름과 2차원 이온전리함배열(MatriXX), 그리고 전자포탈영상장치(EPID)에 대해 절대선량계와 상대선량계로서의 정확도와 효율성을 평가했다. 대상 및 방법: 6 MV X-선을 이용하여 두 가지 유형(기준 조사면, 오차 평가 조사면)의 세기조절 조사면을 설계하고 EDR2 필름, MatriXX, EPID를 사용하여 절대선량과 상대적 선량분포를 비교, 분석했다. 세 시스템의 절대선량 정확성을 평가하기 위해 세 시스템의 선량 측정값과 전리함 측정값을 비교했고, 상대적 선량분포 평가를 위해 기준 조사면과 의도적으로 MLC leaf 위치를 변형시킨 오차 평가 조사면에서 감마($\gamma$)값과 조사면 수직 프로파일을 분석했다. 또한, 환자별 QA 전 과정을 수행하는데 소요되는 시간을 측정하여 시스템에 따른 업무 부하를 비교했다. 결 과: EDR2 필름, MatriXX, 그리고 EPID의 절대선량 측정값과 전리함 측정값을 비교한 결과 EPID는 1%, MatriXX는 2%, EDR2 필름은 3% 이내의 오차 측정 정확도를 보였다. EDR2 필름과 EPID는 허용기준 3%/3 mm와 2%/2 mm 모두에서 감마값이 1을 초과하는 화소($\gamma$%>1)가 전체 화소의 2% 이내였다. 그러나 MatriXX의 경우 3%/3 mm에서는 1% 이내의 오차를 보였으나 2%/2 mm를 적용한 $10\times20\;cm^2$$10\times10\;cm^2$에서는 각각 5.94%와 4.95%로 증가했다. 세 시스템으로부터 얻은 오차 평가 조사면의 선량 분포를 치료계획 장치로부터 얻은 기준 조사면과 중첩하여 감마 분석한 결과, 3%/3 mm에서 EDR2 필름이 -4 mm의 MLC leaf 오차 식별이 가능했고 EPID는 -3 mm 오차를 감지했다. 2%/2 mm의 경우, EDR2 필름과 EPID에서 각각 -3 mm와 -2 mm의 오차 식별이 가능했다. 그러나 MatriXX의 경우 경계가 불분명해 오차 구분이 어려웠다. 환자별 QA 전 과정을 수행하는데 소요되는 시간은 EDR2 필름이 약 110분, MatriXX가 약 80분, EPID가 약 55분이었다. 결 론: 본 연구는 IMRT의 치료 전 환자별 QA를 위한 EDR2 필름, MatriXX, 그리고 EPID의 측정 정확도와 효율성을 분석했다. EDR2 필름과 EPID는 선량 측정 정확도가 우수했으며, MatriXX는 측정 시간이 짧았다. 본 연구 결과는 임상에서 효율적인 IMRT QA 시스템을 구축하는데 좋은 자료가 될 것으로 생각한다.

TACE의 중재적 시술시 환자의 피폭선량 평가 (The Evaluation of Patients' Radiation Dose During TACE of Interventional Radiology)

  • 이승열;임현수;한만석
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제34권3호
    • /
    • pp.209-214
    • /
    • 2011
  • TACE의 중재적 시술시 환자와 시술자가 받는 피폭선량을 평가하고, 환자의 피폭선량을 최소화하기 위한 방안을 모색하기 위함이다. 2010년 6월부터 9월까지 중재적 시술의 빈도와 방사선 피폭의 양이 비교적 큰 TACE 시술환자를 대상으로 혈관조영장비(Philips Allura Xper FD 20)와 장비내 장착된 Ionization chamber에 의해 나타나는 DAP(Dose area product)값에 교정상수를 적용시켜 시술시 환자가 받는 유효선량을 근사적으로 얻어냈으며 환자와 시술자의 갑상선과 생식선 주위에 TLD를 부착하여 피폭선량을 산출하고 SPSS 통계에 의한 분석과 평가를 하였다. DAP값에 의해 산출된 TACE 시술시 1인당 ED(Effective Dose)는 평균 18.43${\pm}$6.63 mSv로 나타났으며 이는 전국 평균값의 75%에 해당한다. 또한 TLD에 의해 측정된 환자의 갑상선과 생식선부위의 1인당 평균피폭선량은 각각 0.37 mSv, 0.77 mSv로 나타났으며 보호용구를 착용한 시술자는 환자 1인당 각각 0.07 mSv, 0.01 mSv의 평균피폭선량을 받았다. 시술에 참여하는 모든 의료진들은 법적 선량한도의 적용을 받지 않는 방사선의료피폭에 대해 경각심을 가져야하며, 영상모니터에 실시간으로 표시되는 DAP값을 이용하여 환자의 피폭선량을 고려하며 시술에 임해야하며 시술에 방해가 되지 않는 한도 내에서 환자에게 차폐용구를 적절히 활용해야 한다.

유리선량계를 이용한 투과선량 기반 환자선량 평가 시스템 개발을 위한 가능성 연구 (Feasibility Study for Development of Transit Dosimetry Based Patient Dose Verification System Using the Glass Dosimeter)

  • 정성훈;윤명근;김동욱;정원규;정미주;최상현
    • 한국의학물리학회지:의학물리
    • /
    • 제26권4호
    • /
    • pp.241-249
    • /
    • 2015
  • 방사선치료는 수술, 항암치료와 함께 암의 3대 치료방법으로써 많은 암환자들이 방사선치료를 받게 된다. 최대한 많은 방사선을 암에 집중시키고 최대한 적은 방사선을 주변 정상 조직에 가해주기 위해 치료 전 치료계획을 철저히 세우고 품질 관리를 시행하지만 방사선치료가 잘못 시행되어 의도치 않은 방사선이 환자에게 전달되는 의료사고가 발생하기도 한다. 이를 해결하기 위해 환자 내부의 선량을 검증하기 위한 방법을 투과선량 측정을 통한 환자 내부선량의 역추정 방법이 제시되고 있다. 본 연구에서 제시한 투과선량을 이용한 환자선량 계산 방법을 거리역자승법칙, 심부선량백분율, scatter factor를 이용한 방법으로써 실제 환자 선량 평가 가능성에 대해 균질한 물등가 팬텀을 이용한 연구이다. 투과선량에 대한 이온함과 유리선량계의 교정 결과 유리선량계의 신호값이 이온함으로 측정한 선량값에 비해 6 MV에서 0.824, 10 MV에서 0.736배인 것으로 나타났고 scatter factor는 평균적으로 1.4정도인 것으로 확인되었다. 심부선량백분율 데이터를 사용하기 위해 Mayneord F factor를 적용하였으며 위의 정보들을 이용하여 균질한 팬텀에서 알고리즘을 검증한 결과 최대 오차 약 1.65%로 계산이 정확하게 실시됨을 확인하였다.

Development and utility evaluation of new Multi-Leaf Collimator for Diagnostic X-ray Equipment

  • Ji, Hoon;Han, Su Chul;Baek, Jong Hyeun;Lee, Dong Hoon;Park, Seungwoo
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.936-942
    • /
    • 2018
  • The diagnostic multi-leaf collimator preventing unnecessary dose from entering into patients during the diagnostic examination was made in this study. The movement of the entire 50 leaves was embodied with the group of 25 ones thereof configured in a pair facing each other on the left and right of the median line. Dimensions of the length, width, and height of each shielding leaf were $5{\times}0.5{\times}0.5cm^3$ resulting in the maximum boost field of $10{\times}10cm^2$. The material of multi-leaf collimator had the excellence on the machinability with the use of the SKD-11 alloy tool steel having the high wear resistance against frequent movement, and it was devised to control both-side's shielding leaves by moving 2 motors unlike existing remedial multi-leaf collimator that use as many motors as the number of 50 shielding leaves. Thereafter, the transmission dose of leaves, cross-leaf leakage dose, and inter-leaf leakage dose were measured by the developed multi-leaf collimator attached to X-ray equipment. An ionization chamber was used to detect doses there from, and the comparative analysis was carried out by means of the radiographic film that was easy to detect the dose leakage in between each leaf. Results obtained from the test conducted in comparative analysis yielded approximately 98%, 96%, and 94% of shielding efficiency realized at each level of energy of 80kV, 100kV, and 120kV it was confirmed there was no dose leakage resulted from the varied level of irradiation energy. Thus the multi-leaf collimator to be developed based on this study is thought that it could fully reduce the unnecessary dose to patients in the diagnostic test and the shielding efficiency thereof is expected to be increasing if it is made in a miniaturized form with a way of increasing the thickness of each leaf later for an extended application to general diagnostic purposes.

방사성 동위원소 (99mTc, 18F) 선원 사용 시 인체 내부피폭의 정량적 평가를 위한 선량분포 연구 (Dose Distribution Study for Quantitative Evaluation when using Radioisotope (99mTc, 18F) Sources)

  • 지영식;이동연;양현경
    • 한국방사선학회논문지
    • /
    • 제16권5호
    • /
    • pp.603-609
    • /
    • 2022
  • 본 연구에서는 핵의학 분야에서 사용 빈도가 높은 방사성 동위원소 99mTc, 18F을 대상으로 물 팬텀과 전리함을 이용한 실측 데이터와 몬테카를로 법 기반의 모의실험 계산을 통해 인체 내 선량 분포를 평가하여 분석하였다. 실험 결과, 방사성 동위원소를 중심으로 거리가 멀어질수록 선량이 지수함수적으로 감소하는 것으로 나타났으며, 특히, 5 cm 이격 시 급격히 감소하는 경향을 보였다. 이를 수치상으로 보면, 99mTc의 경우 0.16 ~ 2.16 pC/min, 18F의 경우 0.49 ~ 9.29 pC/min 범위에서 형성되었다. 또한, 결과값을 이용하여 계산한 에너지 전달계수는 0.240 ~ 0.260 범위에서 실측값과 시뮬레이션 결과값이 유사하게 나타났다. 이와 같은 결과는 실험 결과값에 대한 신뢰도를 확보한 것으로 판단이 되며, 특히, 인체 내 선원 집적 시 선원 이동 경로를 중심으로 4 cm 이내에 위치한 장기에 선량이 많이 전달될 수 있다는 것을 의미한다. 본 연구는 방사성 동위원소에 의한 내부피폭 선량을 정량적으로 평가하기 위해 선원에서 발생하는 방사선 분포를 계산 하였으며, 실측과 모의실험 결과를 비교 분석을 통해 신뢰도가 높은 결과값을 제시할 수 있었다. 무엇보다도 계측기를 통해 체내 방사선 분포를 직접 측정하여 제시한 부분에서 큰 의미를 가지고 있다.

현장검출기에 저장된 백업데이터를 무선통신방식으로 자동 복원하는 실시간 환경선량 감시 시스템 (Real-time Environmental Radiation Monitoring System with Automatic Restoration of Backup Data in Site Detector via Communication using Radio Frequency)

  • 이완로;김은한;정근호;조영현;최근식;이창우;박기현;김윤구
    • Journal of Radiation Protection and Research
    • /
    • 제28권3호
    • /
    • pp.255-261
    • /
    • 2003
  • 환경선량변동을 실시간으로 모니터링하기 위해서 원자력연구소 부지 주변에 온라인 감시시스템이 운영중인데, 현장에 설치된 전리함 검출기에 의해서 측정된 자료는 모뎀을 통해 무선전송방식으로 중앙제어실에 실시간으로 저장된다. 무선 송수신 방식은 전송, 처리 및 저장에 경제적이고 효과적이지만 통신 장애시 현장감시장치에 저장된 백업데이터를 가져오지 못해서 결국 데이터가 손실될 우려가 있다 물론 버퍼에 저장된 선량값을 디스켓 및 다른 off-line으로 복원이 가능하지만 이럴 경우 온라인으로 운영되는 시스템에 과거데이터를 처리해야 하므로 복잡하고 실시간으로 처리 할 수가 없다. 본 연구에서는 기존 감시시스템 중 신호처리 부분과 운영 소프트웨어를 새롭게 개발해서, 현장에 설치된 감시기와 중앙처리 장치의 시각을 매일 자동으로 동기화시키고 이를 이용해서 현장감시장치에 저장된 백업데이터를 자동으로 복원시켰다. 새로 개발된 방식을 이용할 경우 34시간이내에서 통신장애로 수신하지 못한 백업데이터를 자동으로 복원할 수 있고, 복원된 데이터를 현재시각의 데이터와 함께 실시간으로 디스플레이 할 수 있게 하였다.

팬텀투과계수와 유효조사면 개념을 이용한 종양선량 확인에 관한 연구 (IN-VIVO DOSE RECONSTRUCT10N USING A TRANSMISION FACTOR AND AN EFFECTIVE FIELD CONCEPT)

  • 김유현;여인환;권수일
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제25권1호
    • /
    • pp.63-71
    • /
    • 2002
  • The aim of this study Is to develop a simple and fast method which computes in-vivo doses from transmission doses measured doting patient treatment using an ionization chamber. Energy fluence and the dose that reach the chamber positioned behind the patient is modified by three factors: patient attenuation, inverse square attenuation. and scattering. We adopted a straightforward empirical approach using a phantom transmission factor (PTF) which accounts for the contribution from all three factors. It was done as follows. First of all, the phantom transmission factor was measured as a simple ratio of the chamber reading measured with and without a homogeneous phantom in the radiation beam according to various field sizes($r_p$), phantom to chamber distance($d_g$) and phantom thickness($T_p$). Secondly, we used the concept of effective field to the cases with inhomogeneous phantom (patients) and irregular fields. The effective field size is calculated by finding the field size that produces the same value of PTF to that for the irregular field and/or inhomogeneous phantom. The hypothesis is that the presence of inhomogeneity and irregular field can be accommodated to a certain extent by altering the field size. Thirdly, the center dose at the prescription depth can be computed using the new TMR($r_{p,eff}$) and Sp($r_{p,eff}$) from the effective field size. After that, when TMR(d, $r_{p,eff}$) and SP($r_{p,eff}$) are acquired. the tumor dose is as follows. $$D_{center}=D_t/PTF(d_g,\;T_p){\times}(\frac{SCD}{SAD})^2{\times}BSF(r_o){\times}S_p(r_{p,eff}){\times}TMR(d,\;r_{p,eff})$$ To make certain the accuracy of this method, we checked the accuracy for the following four cases; in cases of regular or irregular field size, inhomogeneous material included, any errors made and clinical situation. The errors were within 2.3% for regular field size, 3.0% irregular field size, 2.4% when inhomogeneous material was included in the phantom, 3.8% for 6 MV when the error was made purposely, 4.7% for 10 MV and 1.8% for the measurement of a patient in clinic. It is considered that this methode can make the quality control for dose at the time of radiation therapy because it is non-invasive that makes possible to measure the doses whenever a patient is given a therapy as well as eliminates the problem for entrance or exit dose measurement.

  • PDF

광자극발광선량계와 이온함을 이용한 두경부 원발종양 및 림프절 전이성 종양의 선량 측정: 산란판과 볼루스의 비교 (Measurement of Tumor Dose Using Optically Stimulated Luminescence Detectors (OSLDs) and Ionization Chambers for Primary and Metastatic Lymph Node Cancers with Head and Neck: Comparison of Beam Spoiler and Bolus)

  • 이정옥;이재승;정동혁
    • Journal of Radiation Protection and Research
    • /
    • 제36권3호
    • /
    • pp.160-167
    • /
    • 2011
  • 본 연구는 두경부 방사선치료에서 산란판(beam spoiler)과 볼루스(bolus)를 사용함에 따라 깊이가 다른 원발종양과 림프절 전이성 종양의 선량 변화를 이온함과 광자극발광선량계(optically stimulated luminescence detectors. OSLDs)를 이용하여 치료계획검증 방법으로 교차 비교하였다. 치료계획검증은 치료계획시스템에서 얻은 동일 조사 조건을 검출기가 삽입 가능한 고체 팬텀에 모사하는 방법으로 산란판과 0.5, 1 cm 볼루스를 비교하였으며 두 선량계의 교차비교는 측정 오차가 ${\pm}$2% 미만일 때 신뢰성이 있다고 판단하였다. 연구 결과 0.5 cm 두께의 산란판과 피부간 거리가 10 cm 일 때 최적의 선량분포를 얻을 수 있었으며 볼루스에 비하여 피부선량이 작고 중심부 원발종양 선량의 감소가 작았다. 또한 두 선량계의 교차 비교는 ${\pm}$1% 이내로 유의한 결과를 보였다. 두경부 종양의 방사선치료시 산란판을 사용함으로써 피부 부작용을 줄이면서 종양에 최적의 선량분포를 달성할 수 있다고 판단되었으며 향후 임상에 적용하기 위한 연구가 시행되어야 할 것이다.