• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.6-6
• /
• 1992

Ionized cluster beam deposition (ICBD) technique has been employed to fabricate high-purity crystalline polyimide (PI) film. The pyromellitic dianhydride (PMDA) and oxydianiline (ODA) were deposited using dual ICB sources, Fourier trans forminfraredspectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), and Transmission electron microscopy (TEM)study show that the bulk and surface chemical properties and the crystalline structure are very sensitive to the ICBD conditions such as cluster ion acceleration voltage and ionization voltage, At optimum ICBD conditions, the PI films have a maximum imidization, negligible impurities(∼1% isoimide), and a good crystalline structure probably due to the high surface migration energy and surface cleaning effect. These characteristics are superior to those of films deposited by other techniques such as colvent cast, vapowr deposition, or sputtering techniques.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.319-319
• /
• 2013

Even though the fabrication methods of metal oxide based thin film capacitor have been well established such as RF sputtering, Sol-gel, metal organic chemical vapor deposition (MOCVD), ion beam assisted deposition (IBAD) and pulsed laser deposition (PLD), an applicable capacitor of printed circuit board (PCB) has not realized yet by these methods. Barium Strontium Titanate (BST) and other high-k ceramic oxides are important materials used in integrated passive devices, multi-chip modules (MCM), high-density interconnect, and chip-scale packaging. Thin film multi-layer technology is strongly demanded for having high capacitance (120 nF/$mm^2$). In this study, we suggest novel multi-layer thin film capacitor design and fabrication technology utilized by plasma assisted deposition and photolithography processes. Ba0.6Sr0.4TiO3 (BST) was used for the dielectric material since it has high dielectric constant and low dielectric loss. 5-layered BST and Pt thin films with multi-layer sandwich structures were formed on Pt/Ti/$SiO_2$/Si substrate by RF-magnetron sputtering and DC-sputtering. Pt electrodes and BST layers were patterned to reveal internal electrodes by photolithography. SiO2 passivation layer was deposited by plasma-enhanced chemical vapor deposition (PE-CVD). The passivation layer plays an important role to prevent short connection between the electrodes. It was patterned to create holes for the connection between internal electrodes and external electrodes by reactive-ion etching (RIE). External contact pads were formed by Pt electrodes. The microstructure and dielectric characteristics of the capacitors were investigated by scanning electron microscopy (SEM) and impedance analyzer, respectively. In conclusion, the 0402 sized thin film multi-layer capacitors have been demonstrated, which have capacitance of 10 nF. They are expected to be used for decoupling purpose and have been fabricated with high yield.

• 한국진공학회지
• /
• 제12권2호
• /
• pp.112-117
• /
• 2003

MgO 박막은 PDP(plasma display panels)분야에서 널리 사용되어 왔다. 본 연구에서는, 기존에 사용되고 있는 e-beam evaporation, reactive magnetron sputtering법과 arc deposition법으로 MgO 보호막을 증착하여 구조적 · 광학적 특성을 비교하였다. 반응 가스인 산소 가스의 유입량을 변화시켜 Mg metal target을 이용하여 vacuum arc deposition equipment 의해 유리 기판 위에 증착하였다. Ellipsometer를 이용하여 치밀도를 측정하고, MgO보호막의 마모율(erosion rate)를 측정하기 위해 가속 실험 방법을 도입, Ar+ 이온빔에 의한 erosion test를 시행하여 내마모성을 알아보았다. 또한, XPS와 UV test를 사용하여 MgO보호막의 광투과도에 미치는 수분의 영향을 조사한 결과, arc evaporation 법이 광투과도 90%이상을 유지하여 수분의 영향에 둔감한 것을 알 수 있었다. 한편, XRD와 AFM을 이용하여 MgO 박막의 구조와 표면 형상에 대해 조사하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.489-489
• /
• 2013

AF 코팅은 유리나 플라스틱과 같은 기재 표면을 특수 처리하여 지문과 같은 오염물질의 부착방지와 오염물질이 부착되더라도 쉽게 제거 가능하도록 하는 기술이다. 전자, 자동차, 건축, 섬유, 철강분야 등에 활용 가능한 중요기술로 박막의 발수 발유 기능을 부여하는 표면처리 기술이고, 코팅방법에는 진공증착, 스핀코팅, 딥코팅, 플로우 코팅, 스프레이 코팅 등이 있으며, 경화 방법이나 접촉각 등의 특성이 반영된다. 터치패널 등의 지문부착방지 기술은 불소계와 비불소계 재료로 구분할 수 있지만 지문을 쉽게 지울 수 있고, 오염 방지 기능과 내구성이 있으며, 우수한 광학특성을 유지하는 것이 과제라 할 수 있다. 그리고 항균성을 부여하는 기술도 개발되고 있다. 이런 터치패널의 강화유리에 AF 코팅한 제품은 핸드폰 글래스에 처음 적용하면서부터 실생활에 도입이 시작되고 있다. 이러한 AF 코팅을 스퍼터링 법을 이용하여 증착 시켰다. 기존에는 E-beam을 이용한 증착 방식이 주를 이루었지만, 스퍼터링 법을 이용함으로써 박막의 균일화 및 대량생산이 가능해졌다. 따라서 이 연구에서는 기존의 E-beam 방식과 sputtering 공정 중 ion source에 의한 전처리의 유무에 따른 박막의 특성을 비교하였다. 내부식성, 내마모성 시험을 거친 후, 접촉각을 측정하여 알아보았으며, 박막의 건전성 및 균일성은 FE-SEM을 이용하여 관찰하였다. 실험용 장비가 아닌 실제 생산장비인 직경 1,400 파이의 장비를 이용하여 증착하였으며 염수분무 및 내마모 시험 후, 기존 접촉각의 ${\pm}5^{\circ}$ 내외임을 확인 할 수 있었고, 박막의 건전성 또한 뛰어남을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.274-274
• /
• 2012

In-depth analysis by secondary ion mass spectrometry (SIMS) is very important for the development of electronic devices using multilayered structures, because the quantity and depth distribution of some elements are critical for the electronic properties. Correct determination of the interface locations is critical for the calibration of the depth scale in SIMS depth profiling analysis of multilayer films. However, the interface locations are distorted from real ones by the several effects due to sputtering with energetic ions. In this study, the determination of interface locations in SIMS depth profiling of multilayer films was investigated by Si/Ge and Ti/Si multilayer systems. The original SIMS depth profiles were converted into compositional depth profiles by the relative sensitivity factors (RSF) derived from the atomic compositions of Si-Ge and Si-Ti alloy reference films determined by Rutherford backscattering spectroscopy. The thicknesses of the Si/Ge and Ti/Si multilayer films measured by SIMS depth profiling with various impact energy ion beam were compared with those measured by TEM. There are two methods to determine the interface locations. The one is the feasibility of 50 atomic % definition in SIMS composition depth profiling. And another one is using a distribution of SiGe and SiTi dimer ions. This study showed that the layer thicknesses measured with low energy oxygen and Cs ion beam and, by extension, with method of 50 atomic % definition were well correlated with the real thicknesses determined by TEM.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.199-203
• /
• 2004

Superconducting B $i_2$S $r_2$C $a_{n-l}$C $u_{n}$ $O_{x}$(n=2～4) thin films were prepared by single target DC-magnetron sputtering. And, that was compared with the B $i_2$S $r_2$C $a_{n-l}$C $u_{n}$ $O_{x}$(n=1～3) thin film fabricated by using the ion beam sputtering. Phase intergrowth among n=2-3, 3-4 and 4-5 phases was observed. The molar fraction of each phase in the mixed crystal of the deposited films was determined by x-ray diffraction analyses and investigated as a function of $O_2$ gas pressure during sputtering. We investigated the changes of the superconducting properties by molar fraction of each phase. Also, the thin film surface observation was carried out by atomic force microscope. The images show the average particle size decreases, and the distribution density of particles on the film surface was to increase with lower gas pressures. The fabrication conditions for selective growth of the single n=2, 3 and 4 phases in BiSrC $a_{n-l}$C $u_{n}$ $O_{x}$(n=2～4) thin film are discussed.e discussed.ussed.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.482-489
• /
• 1999

AC PDP(P1asma Display Pane1)s use the mixture of inert gases to generate a discharge inside the display pixels. Impurities such as CO, $CO_2$ and OH inside discharge region may deteriorate the characteristics of PDP operation during long life time of PDP. Electro-negative gas such as CO can cause the sustain pulse amplitude to rise by attaching electrons which will play an important role in the earlier stage of the discharge. MgO film is used to protect the dielectric layer in AC PDP, and is in contact with the free space of display pixel where it is filled with the inert gas mixture. So, MgO film can be a main source of impurities. In this experiment, we observed the change of impurity generation of various MgO films which were deposited by different methods, by using QMS. (quadropole mass spectrometer) The main impurites were $H_2$, CO and $CO_2$. And with the comparison of the TPD (temperature programmed desorption) result, it can be understood that impurity gases are generated by sputtering of MgO surface not by outgassing. Deposition method had effects on the characteristics of the impurity generation. The MgO film manufactured by e-beam evaporation generated more amount of impurity gases than the MgO films manufactured by sputtering or ion-plating. And also heat treatment of MgO film after deposition decreased the magnitude of impurity gas generation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.244.2-244.2
• /
• 2014

금속, 플라스틱, 유리 등의 재료 표면에 다양한 색상을 표현하기 위해 일반적으로 습식 도금을 많이 적용하고 있다. 하지만 습식 도금은 공정 수가 많을 뿐만 아니라 위험물질 및 오염물질을 많이 사용하기 때문에 산업사고, 환경오염 등을 야기 시킨다. 따라서 본 연구에서는 친환경적 방법인 물리적기상증착(PVD ; Physical Vapor Deposition) 방식의 한 종류인 스퍼터링(Sputtering)으로 색상을 구현하였다. PVD 방식의 증착은 습식 도금 방식에 비해 친환경적이며, 전처리에서 후처리까지 한 공정으로 가능하다는 점이다. 스퍼터링은 PVD의 다른 방식인 E-beam 방식에 비해 대량생산을 할 수 있다는 장점이 있다. 양산형 스퍼터링 장비(${\Phi}1200mm{\times}H1400mm$)로 실험을 진행하였으며, 증착 물질은 Ti, Al, Cr 을 사용하였고, 반응성 가스(Reactive Gas) 로는 N2, C2H2 가스를 사용하였다. 전처리는 LIS (Linear Ion Source)로 식각(Etching) 하였고, 펄스직류전원공급장치(Pulsed DC Power Supply)를 사용하여 증착 하였으며, 증착시 기판에 bias (-100 V)를 인가 하였다. 그 결과 회색계열, 갈색계열 등 여러가지 색을 구현할 수 있었으며, 증착된 박막의 특성을 알아보기 위하여 색차계, 내마모 시험기, 연필경도 시험기를 사용하였다. 향후 후처리 공정으로 내지문(AF ; anti fingerprint coating) 박막 등과 같은 실용적인 박막을 증착할 계획이다.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.688-693
• /
• 2001

A series of Fe/CeO$_2$/Fe$_{75}$Co$_{25}$ tunnel junctions (Magnetic Tunnel Junction, MTJ) having CeO$_2$ barrier layers from 30 to 90$\AA$ in thickness were prepared by ion beam sputtering (IBS) method. In order to compare the properties of MTJs, Fe/Al oxide/Fe-Co tunnel junctions were also prepared. Some junctions with a CeO$_2$ barrier layer showed the ferromagnetic tunneling effect and the highest MR ratio at room temperature was 5%. The electric resistance of junctions with a CeO$_2$ barrier layer was higher that that of junctions with an Al oxide barrier. On the other hand, The interface analysis of the Fe/CeO$_2$ bilayer was conducted by means of X-ray photoelectron spectroscopy (XPS). It was found that CeO$_2$ was decomposed to Ce and $O_2$ during sputtering, and Fe was oxidized with these decomposed $O_2$ molecules. The reduction of both electric resistance and MR ratio may be associated with the decomposed Ce in the barrier layer.r.r.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.366-367
• /
• 2006

Different orientated SBN thin films were deposited by Ion Beam Sputtering, and electric properties were measured on each orientation. Ferroelectric $Sr_xBa_{1-x}Nb_2O_6$(SBN) has excellent electro-optic, photo-refractive, piezoelectric, pyroelectric properties. SBN thin film has been deposited by various method, of sol-gel, PLD, CVD, sputtering, etc.. To avoid lead pollution of Pb-system perovskite ferroelectric materials. SBN thin films were fabricated for pyroelectric IR sensor. Using the ceramic target of the same composition and Pt(100)/$TiO_2/SiO-2$/Si(100) substrate, crystallization and orientation behavior as well as electric properties of the films were examined. Seed layer and thin films thickness was controlled to observe the effect on preferred orientation. We measured I-V, C-V, P-E hysteresis to characterize electric-properties on each orientations.